Atek electronicメーカーLG10Bの使用説明書/サービス説明書
ページ先へ移動 of 60
User's Manual Logio ® Secure P assword Organizer.
.
Logio User’ s Manual, page 1 Contents Software License Agreement ...................................................................................2 Need Help? ........................................................................................
Logio User’ s Manual, page 2 Software License Agreement PLEASE READ THE SOFTWARE LICENSE AGREEMENT CONTENTS IN THE BACK OF THIS USER’S MANUAL CAREFULL Y BEFORE USING THIS PRODUCT .
Logio User’ s Manual, page 3 Need Help? If you have any problem using your Logio ® Secure Password Organizer , do not return it to the dealer . First read this User’ s Manual. If you still have difficulties, check our website www .atek.com for possible additional information.
Logio User’ s Manual, page 4 Product Overview Logio is a single-user , secure electronic organizer for storing user IDs and passwords for websites and computer logins.
Logio User’ s Manual, page 5 BEFORE USING YOUR LOGIO THE FIRST TIME, INST ALL THE BA TTERY PER THE INITIAL SETUP INSTRUCTIONS IN THIS USER’S MANUAL.
Logio User’ s Manual, page 6 Delete record • T o delete an entire record, navigate to the record in “view” mode, then push & hold & push . Or , in “edit” mode, delete all characters on all lines, then with cursor on line 3 push or .
Logio User’ s Manual, page 7 Initial Setup IMPORT ANT NOTE: Y our Logio automatically turns off after a set period of inactivity to save battery power and protect against intrusions by other people.
Logio User’ s Manual, page 8 After several seconds, the screen will display: Push one time. 4. Set up master passcode THIS SECTION IS VERY IMPOR T ANT . MAKE SURE YOU HA VE READ IT COMPLETEL Y BEFORE PROCEEDING. The screen will display: Push one time.
Logio User’ s Manual, page 9 maximum number of 15 allowed, the higher level of security you will have. (If you enter more digits than can display on one screen, the screen will shift to the right.) It is very important that for your Logio master passcode you use random numbers that nobody else will be able to guess.
Logio User’ s Manual, page 10 Then you would push to start entering your master passcode from the beginning. If you enter a master passcode that is 8 to 15 digits long, the screen will display: Enter your master passcode again and then push .
Logio User’ s Manual, page 11 Push . The screen will display: Lost & found lets you display your name and telephone number on lines 1 and 2 of the screen when you turn on your Logio (you enter your master passcode on line 3).
Logio User’ s Manual, page 12 when you go back to the main screen, you will see a right arrow on the right side of any line that has overflowed, indicating that you can push to go to the right screen. When you are done entering characters, or if you want to leave the name field blank, push or .
Logio User’ s Manual, page 13 using the button, which can input a total of 31 different characters. When you are done entering ID1, or if you do not want to enter anything, push or .
Logio User’ s Manual, page 14 Push . The screen will display: Auto-off time is the amount of time until Logio will turn off automatically due to inactivity (i.e., after you stop pushing buttons but have not turned it off manually). The default setting is one minute.
Logio User’ s Manual, page 15 Push when you are done. Y ou can always change this setting later (except when the battery is low) by pushing the setup options button . Note that you can also directly change the contrast level, even when the battery is low , in “view” mode by pushing and holding and then pushing or .
Logio User’ s Manual, page 16 Adding New Records After you finish the initial setup, the screen will display: Again, a “record” is one set of data consisting of a website name and/or address on line 1, a user ID on line 2, and a password on line 3, for example: Y ou can set up new records now or later .
Logio User’ s Manual, page 17 ID (user ID) The title “ID:” on line 2 will flash. When you start entering characters, this title will disappear .
Logio User’ s Manual, page 18 you to remember strong ones, or you used the same password on multiple websites, now is a good opportunity to change to stronger passwords, and different ones for each website, because you have Logio to help you keep track of your passwords.
Logio User’ s Manual, page 19 Viewing Records Each time you turn on Logio, it is in “view” mode, but first you need to enter your master passcode.
Logio User’ s Manual, page 20 If you push , the screen will jump to the right so you can view the rest of the characters on the right side screen. Once on that screen, you will see a left-pointing arrow on the left side of any lines that have characters on the left (main) screen, which indicates you can push to jump back to the left screen.
Logio User’ s Manual, page 21 Editing Records T o edit existing records, first navigate in “view” mode to the record you want to edit, and then push . The cursor will blink on the first character of line 1. Y ou can edit the website name and/or address, user ID, and password of any record.
Logio User’ s Manual, page 22 Push to delete the entire line of characters or push to cancel deletion. Inserting and replacing characters Logio inserts characters rather than overwriting characters,.
Logio User’ s Manual, page 23 Deleting Records There are two ways to delete entire records: 1. Navigate to the record in “view” mode and then push and hold and push .
Logio User’ s Manual, page 24 Changing Setup Options Y ou can change your master passcode, lost & found information, user IDs 1, 2, and 3, button tone volume, auto-off time, and contrast level by pushing the setup options button when in “view” mode.
Logio User’ s Manual, page 25 If you want to skip changing your master passcode and go to the next setup option, push , otherwise push to retr y . After the correct old master passcode is entered, t.
Logio User’ s Manual, page 26 Pushing will allow you to try to enter and confirm the master passcode again. If you want to start over with a new master passcode, push and the screen will display: A.
Logio User’ s Manual, page 27 And then several seconds later it will display: Push if you want to skip to the next setup option (button tone volume). If you push , the screen will display your current user IDs with the cursor flashing on the first character of line 1, or the title “ID1:” will flash if you do not have user ID 1 set up.
Logio User’ s Manual, page 28 Push if you want to skip to the next option (contrast level). If you push , the screen will display your current auto-off time setting.
Logio User’ s Manual, page 29 Auto-Off Time - Semi-Permanent & T emporar y Settings Y our Logio is set by default to turn off after one minute of inactivity in order to save battery power and protect against intrusions.
Logio User’ s Manual, page 30 If later in the same session you want to increase the number of auto-off minutes, when you push and hold and push the screen will display the next one minute increment above what you have already added.
Logio User’ s Manual, page 31 Usage Suggestions - Hardware Backup For security purposes and other product design reasons, there is no way to back up the data on your Logio, no way to recover data if you forget your master passcode, and no way to reset the Logio.
Logio User’ s Manual, page 32 Usage Suggestions - Software Y ou can use your Logio for securely storing all kinds of personal information. Here are some suggested ways to use your Logio: Website log.
Logio User’ s Manual, page 33 Line 3: Expiration date and 3 or 4 digit security code (and you may also want to store the card’ s customer service telephone number in case you need to call them urg.
Logio User’ s Manual, page 34 Better Security & Stronger Passwords No security measures are 100% effective against all kinds of attacks, but there are various steps you can take to greatly improve your security .
Logio User’ s Manual, page 35 Display Character Reference Most characters in Logio display as you would expect, but due to the specifications of the LCD screen, pay special attention to how the fol.
Logio User’ s Manual, page 36 Sorting (Alphabetizing) Order Logio sorts records according to the first character(s) of line 1, first by numbers, then by special characters (symbols and punctuation marks), then by letters, in this order: 0 1 2 3 4 5 6 7 8 9 (space) ! “ # $ % & ‘ ( ) * , - .
Logio User’ s Manual, page 37 Field Lengths Maximum numbers of characters: Site: 50 ID: 50 PW: 20 Lost & Found - Name: 48 Lost & Found - T elephone: 32 User IDs 1, 2, and 3: 48 Field Lengths.
Logio User’ s Manual, page 38 Button Reference On/off • T urns Logio on and off • Used in combination with the button to add more auto-off time temporarily Enter • Used to complete entry of ma.
Logio User’ s Manual, page 39 • In “edit” and “new” modes, used to move cursor down to next line within the current record, and in some setup screens used to move cursor down to next line .
Logio User’ s Manual, page 40 current line, one space per push (to insert a blank space before or between existing characters, push and hold and push ) • Moves selection to right in some setup scr.
Logio User’ s Manual, page 41 Edit & delete • In “view” mode, used to change to “edit” mode to edit the current record • In “edit”, “new”, and “setup” modes and when entering master passcode, used to delete characters (push and hold down to delete multiple characters after a slight delay).
Logio User’ s Manual, page 42 . - _/ ~ ` ! # $ % ^ & * ( ) + = { } [ ] | : ; “ ‘ < > , ? On the Logio screen they display like this: • In “view” mode, push the button the corres.
Logio User’ s Manual, page 43 repeated multiple times would not be considered to be a strong master passcode or Web password and is not recommended!) Alphanumeric 2 - 9 (numbers & letters) • I.
Logio User’ s Manual, page 44 Low Battery Warning & Changing the Battery Battery life depends on how often you use your Logio. If it is low on batter y power , when you turn it on you will see a flashing low battery icon on the right side of line 3 of the screen (master passcode entry line).
Logio User’ s Manual, page 45 Storage Capacity Logio can store approximately 200 typical size records. The number of records you can store will vary depending on whether your records generally use a large or small number of characters.
Logio User’ s Manual, page 46 Frequently Asked Questions Q: If I forget my master passcode, or if I want to delete all my records, can I just reset my Logio? A: Y our Logio does not have a reset but.
Logio User’ s Manual, page 47 records? A: Logio was not designed with the ability to interface with a computer because many people prefer to have a self-contained device for storing their passwords.
Logio User’ s Manual, page 48 Maintenance CAUTION : The LCD screen is made of glass and can break if bent. If you will be placing your Logio in a wallet, be warned that keeping your wallet in your back pocket and sitting on it could damage the product, possibly causing injury to you and rendering the product inoperable.
Logio User’ s Manual, page 49 Regulatory Statements FCC notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Logio User’ s Manual, page 50 Specifications Model number: LG10B (black) or LG10W (white) Battery type: CR2016 coin cell Specifications.
Logio User’ s Manual, page 51 One Y ear Limited Warranty The following limited warranty applies only to the United States and Canada: Atek, Inc. warrants to you, as the original purchaser of this ha.
Logio User’ s Manual, page 52 void this warranty . As with any electronic hardware device, it is your responsibility to be careful not to expose this device to water or to other fluids, or to do anything that creates a risk of electrical shock, or to expose it to high heat, freezing temperatures, high pressure, and/or physical shock.
Logio User’ s Manual, page 53 Contact Information If you have any problem using your Logio Secure Password Organizer , do not return it to the dealer . First read this User’ s Manual. If you still have the problem, check our website www .atek.com for possible additional information.
Other Atek Products If you like Logio, you may want to try some of Atek’ s other products. • T ote-Remote ® presentation remote control • OnBoard ® travel keyboard • LogKey ® USB flash dri.
Software License Contents THROUGH YOUR PURCHASE OF THIS PRODUCT , A TEK, INC. GRANTS YOU A NONEXCLUSIVE LICENSE TO USE THE SOFTWARE CONT AINED WITHIN THE PRODUCT . A TEK RET AINS ALL RIGHTS NOT EXPRESSL Y GRANTED. USE OF THE SOFTWARE ST ARTS FROM THE FIRST TIME YOU TURN ON THE PRODUCT .
Logio User’ s Manual, page 56 TO THE AGREEMENT . IF YOU DO NOT AGREE TO ANY SUCH MODIFICA TIONS, YOU MUST IMMEDIA TEL Y STOP USING THE SOFTWARE IN THE PRODUCT .
.
Logio User's Manual Rev . 1.
デバイスAtek electronic LG10Bの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Atek electronic LG10Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAtek electronic LG10Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Atek electronic LG10Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Atek electronic LG10Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Atek electronic LG10Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAtek electronic LG10Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Atek electronic LG10Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAtek electronic LG10Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。