ATEN TechnologyメーカーACS-1208Aの使用説明書/サービス説明書
ページ先へ移動 of 64
User Manual ACS-1208A ACS-1216A 2003-06-20.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Packing List The complete ACS-1208A / ACS-1216A package consists of: M 1 ACS-1208A or ACS-1216A KVM Switch M 2 Custom KVM Cable Sets (2L-5202P) M 1 Firmware Upgrade Cable M 1 Power Adapter M 1 Rack Mounting Kit M 1 User Manual Check to mak e sure that all the co mponents are present and that nothing got damaged in shipping.
Table of Contents 1. Introduction Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Hardware Requirements . . . . . . . . . . . . . . . . . . . . . .
4. OSD Operation OSD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 OSD Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 OSD Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 OSD Main Screen Headings .
About This Manual This User Manual is provided to help you get the most from your ACS-1208A / ACS-1216A system. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is pro v id ed b elo w.
Conventions The following typographical conventions are used throughout this manual: M Bullet lists provide in fo rmatio n, but not pro ced ural steps. M Numbered lists rep resen t pro ced ures with seq uen tial step s. M An indented typeface like the one below: Key information in indicates words and characters you key in.
Notes: 2003-06-20 ACS-1208A / ACS -1216A User Manual viii.
Chapter 1. Introduction T his chapter introduces you to the ACS-1208A / ACS-1216A KVM Switch. Its purpose, features and benefits are presented, an d its front and back panel comp o- nents are described.
Your ACS-1208A / ACS-1216A investment is protected by an included Firmware Upgrade Utility . You can stay cu rrent with the latest imp rove- ments in functionality by downloading th e latest firmware files from our website and using th e utility to quickly and convenien tly perform the upgrade.
Features M A single console controls up to 8 (ACS-1208A) or 16 (ACS-1216A) computers M Daisy chain up to 31 ad ditio nal units - co ntrol up to 512 computers from a sin gle co nso le M No software req.
Hardware Requirements Console M A VGA, SVGA, or Multisy nc mo nito r cap ab le of th e hig h est resolution that you will be using on any computer in the installation. M A PS/2 style mouse M A PS/2 style keyboard Computers The following equip ment must be installed on each co mputer: M A VGA, SVGA or Multisync card.
Cables Substandard cables may damage the connected devices or degrade overall performance. For optimum sig nal integrity an d to simplify th e layout, we strongly recommend that you use the high quality CS Custom Cable sets described below: Function CS Part Number KVM Switch to K VM Switch (Daisy Chai ning) 2L-1700 - 0.
ACS-1208A Front View 1. Port LEDs The Port LEDs provide status in fo rmatio n ab out th eir corresponding CPU Ports. There is one pair of LEDs for each Port.
3. Power LED The Power LED lights to indicate that the ACS-1208A is powered up and ready to operate. 4. Station ID LED The ACS-1208A’s Station ID is displayed here. If this is a Single Station installation (see p. 2-1), or the First Station on a Daisy Chained installation (see p.
ACS-1216A Front View 1. Port LEDs The Port LEDs provide status in fo rmatio n ab out th eir corresponding CPU Ports. There is one pair of LEDs for each Port.
3. Power LED Lights to indicate that the ACS-1216A is powered up and ready to operate. 4. Station ID LED The ACS-1216A’s Station ID is displayed here. If this is a Single Station installation (see p. 2-1), or the First Station on a Daisy Chained installation (see p.
ACS-1208A / ACS-1216A Rear View 1. Daisy Chain Ports When Daisy Chaining Units, the cables plug in here. The port on the left is the Chain In port; the one on the right is the Chain Out port. 2. CPU Port Section The cables that link to th e co mp uters plug in here.
5. Firmware Upgra de Port The Firmware Upgrad e Ca ble that transfers the firmware upgrade data from the administrator’s computer to the ACS-1208A / ACS-1216A (see p.
Notes: 2003-06-20 ACS-1208A / ACS -1216A User Manual 1-12.
Chapter 2. Installation T his chapter explains how to connect up your installation — from a basic single stage arrangement to a co mplete daisy chain ed co nfig uration. Before you Begin 1. Make sure that power to all the devices you will be connecting up have been turned off.
3. Plug th e power ad ap ter cab le into the Master View’s Power Jack , then plug th e power ad ap ter in to an AC power source. 4. Turn on th e power to th e co mp uters. Daisy Chaining To control even more computers, up to 31 additional switches can be daisy chained down from the first unit.
2. Use a daisy ch ain cab le set (d escrib ed in the Cables section, p. 1-5), to connect the Ch ain Ou t port of th e paren t switch to the Chain In port of the child switch (First Station Out to Seco nd Station In, Second Station Ou t to Third Station In, etc.
2003-06-20 ACS-1208A / ACS -1216A User Manual 2-4.
Hot Plugging The ACS-1208A / ACS-1216A supports hot plugging - components can be removed and added back into the installation by unplugging their cables from the ports with out the need to sh ut the unit down.
Port ID Numbering Each CPU port on a Master View installation is assigned a unique Port ID. The Port ID is made up of two parts: a two-digit Station Number , and a two-digit Port Number : M The Station Number - reflects the switch’s position in th e daisy chain sequence.
Chapter 3. Hotkey Operation T his chapter details the co ncep ts an d pro ced ures in volved in th e Ho tkey operation of your ACS-1208A / ACS-1216A installation. Hotkey Port Access Hotkey port access allows you to provide KVM focus to a particular computer directly from the keyboard.
When Hotk ey Mo de is active: M The Caps Lock and Scroll Lock LEDs flash in su ccessio n. They stop flashing and revert to normal status when you exit Hotkey Mode. M A Command Line appears on th e mo nito r’s screen . The co mman d line pr ompt is t he word Hotkey: and appears in yellow text on a blue background.
Auto Scanning Auto Scan automatically switches among all accessible CPU Ports at regular intervals, so that the operator can monitor their activity without having to switch among them manually. (See Scan/Skip Mode of the OSD F3 SET function, p. 4-7 for information regarding accessible ports.
Invoking Auto Scan: To start Auto Scannin g, key in the follo wing Hotkey co mbination: 1. Invoke Hotkey Mode (see p. 3-1). 2. Press [A] . You automatically ex it Ho tkey Mode, an d enter Auto Scan Mode. The KVM focus switches among th e accessib le co mp uters at regular intervals.
Skip Mode Skip Mode allows you to switch between computers in order to monitor them manually. Unlik e Auto Scanning , which auto matically switches after a fixed interval, you can dwell on a particular port for as long or as little as you like. To invoke Skip Mode, key in the following Hotkey combination: 1.
Hotkey Beeper Control The Beeper (see Activate Beeper, p. 4-9) can be Hotkey toggled On an d Off. To toggle the Beep er, key in the followin g Hotkey co mbination: 1. Invoke Hotkey Mode (see p. 3-1). 2. Press [B] After you press B , the Beeper toggles On or Off.
Chapter 4. OSD Operation T his chapter prov ides a complete descrip tion of the proced ures involved in the OSD (On Screen Display) operation of your ACS-1208A / ACS-1216A installation. OSD Operation OSD Overview The On Screen Display (OSD) is a men u driven method to handle computer contro l and switching operations.
When you invoke the OSD, a screen similar to the one below appears: Note: 1. The diag ram dep icts th e Ad min istrato r’s Main Screen . The User Main Screen does not show the F4 and F6 fu nctio ns, since these are reserved fo r th e Ad min istrato r and can’t be accessed by ordinary Users.
OSD Navigation w To dismiss the menu, and deactivate OS D, Click th e X at th e upper right corner of th e OS D Win dow; or press [Esc] . w To Logout, Click F8 at the top of the Main Screen, or press [F 8] .
OSD Functions OSD functions are used to configure an d control the OSD. For ex ample, you can: rapidly switch to any port; scan selected ports only; limit the list you wish to view; designate a port as a Quick View Port; create or edit a port name; or make OSD setting ad ju stments.
F2 LIST : The LIST function lets you broaden or narrow the scope of which ports the OSD displays (lists) on th e Main Screen. Many of the OSD fu nctio ns only operate on th e co mp uters th at have been selected for listin g on th e Main Screen with this function.
F3 SET: This function allows the Ad min istrator and each User to set up his own workin g en viro nmen t. A sep arate profile for each is sto red by the OSD and is activ ated acco rd in g to the Username that is provided during Login. To change a setting: 1.
(F3 SET: continued) Setting Function PORT ID DISPLAY MODE Selects how the Port ID i s displayed: the P ort Number alone ( PORT NUMBER ); the Port Name alone ( PORT NAME ); or the Port Number plus the P ort Name ( PORT NUMBER + PORT NAME ). The default is P ORT NUMBER + PORT NAME).
F4 ADM: F4 is an Administrato r only fu nctio n. It allo ws the Administrato r to configure and co ntro l the overall operation of the OS D. To change a setting Do uble Click it; or use th e Up an d Do wn Arro w Keys to move th e hig h lig ht bar to it th en press [Enter] .
(F4 ADM: continued ) Setting Function EDIT PORT NAMES To help remember whi ch computer is attac hed to a particular port, every port can be gi ven a name. This function allows the Administrator to create, modi fy, or delete port names. To E dit a port name: 1.
(F4 ADM: continued ) Setting Function SET QUICK VIEW PORTS This func tion lets the A dministrator selec t which Ports to include as Quick V iew ports. w To select/deselect a port as a Quick View Port, Double Click the port you want, or use the Navigation Keys to move the highlight bar to it, then press [Enter] .
(F4 ADM: continued ) Setting Function RESET STATION IDS If you change the pos ition of one of the Stations in the daisy chain, the OSD settings will no longer corres pond to the new situation.
F5 SKP: This function enables you to easily skip backward or forward - switching the co nso le fo cu s from the curren tly active comp uter port to the previo us or nex t availab le one. w The selection of computers to be av ailab le for Skip Mode switching is made with th e Scan/Skip Mode setting under the F3 SET function (see p.
F6 BRC: F6 is an Administrato r only fu nctio n. When this fu nctio n is in effect, commands sent from the console are broadcast to to all available comp uters on th e in stallatio n.
F7 SCAN: The SCAN function allows you to automatically switch among the available computers at regular intervals so that you can monitor their activity with out hav in g to tak e the trouble of switchin g manually.
F8 LOUT: This function logs you out of OSD control of the computers, and blanks the Console screen. After using this function you must log in all over again to reg ain access to th e OS D.
Notes: 2003-06-20 ACS-1208A / ACS -1216A User Manual 4-16.
Chapter 5. The Firmware Upgrade Utility T his chapter explains the use and function of the Firmware Upgrade Utility: how to get the firmware upgrade files; and how to complete the process successfully. Introduction Purpose The purpose of the Windows-b ased Firmware Up grad e Utility (FWUpgrade.
Before You Begin To prepare for the firmware upgrade, do the following: 1. From a computer that is not part of your KVM installation go to our Internet support site and choose the model name that relates to your device to get a list of available Firmware Upgrade Packages.
Performing the Upgrade Starting the Upgrade To upgrade your firmware: 1. Run th e down load ed Firmware Up grad e Pack ag e file - eith er by double clicking the file icon, or by opening a command line and entering the fu ll path to it. The Firmware Upgrade Utility Welcome screen appears: 2.
3. Click Nex t to co ntin ue. The Firmware Up grad e Utility main screen appears: The Utility inspects your installation. All the devices capable of being upgraded by the pack ag e are listed in the Device List pan el. 4. As you select a device in the list, its description appears in the Device Description panel.
5. After you have made your device selection(s), Click Next to perform the upgrade. If you enabled Check Firmware Version , th e Utility co mpares the device’s firmware level with that of the upgrade files.
Upgrade Succeeded After the upgrade has completed, a screen appears to inform you that the procedure was successful: Click Finish to clo se the Firmware Upgrade Utility .
Upgrade Failed If the upgrade failed to complete successfully a dialog box appears asking if you want to retry. Click Yes to retry. If you Click No , the Upgrade Fa iled screen appears: Click Cancel to close the Firmware Upgrade Utility. See th e next section, Firmware Upgrade Recovery , for how to proceed.
Firmware Upgrade Recovery There are basically three conditions that call for firmware upgrade recovery: M When you invoke Firmware Upgrade Mode (see p. 5-2), but decide not to proceed with the upgrade. M When the Mainboard firmware upgrade fails. M When the I/O firmware upgrade fails.
Appendix T his appendix provides specificatio ns and other tech nical information reg arding the ACS-1208A / ACS-1216A. ACS-1208A /ACS-1216A - Connection Tables The following tab les indicate the rela.
ACS-1216A MVs Computers MVs Computers MVs Computers MVs Computers 1 1 - 16 9 129 - 144 17 257 - 272 25 385 - 400 2 17 - 32 10 145 - 160 18 273 - 288 26 401 - 416 3 33 - 48 11 161 - 176 19 289 - 304 27.
Clear Login Information If you are unable to perform an Administrator login (because the Username and Password information has become corrupted, or you have forgotten it, for example), you can clear the login information with the following procedure: 1.
Specifications Function ACS-1208A ACS-1216A Computer Connections Direc t 8 16 Max 256 (via Daisy Chain) 512 (via Daisy Chain) Port Selection OSD (On S creen Display); Hotkeys LEDs On Line 8 (Orange) 1.
Rack Mounting The ACS-1208A / ACS-1216A can be mounted in a 1U system rack. For convenience an d flexibility, the mo unting brackets can screw into either the front or th e back of the unit so that it can attach to the front or the back of the rack.To rack mo unt the unit do the follo win g: 1.
Troubleshooting Symptom Possible Cause Action Erratic behavior. Unit not receiving enough power. Check that the Power Adapter that was suppli ed with the unit is pl ugged in and functioning properl y. Mouse and/or Keyboard not responding. Improper mouse and/or keyboard reset.
A ACS-1208A Computer Connection Table . . . . . . . . A-1 Front View . . . . . . . . . . . . . . . . . . . . . . 1-6 Rear View . . . . . . . . . . . . . . . . . . . . . 1-10 ACS-1216A Computer Connection Table . . . . . . . . A-2 Front View . . . . . .
L LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Logout . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 Logout Timeout . . . . . . . . . . . . . . . . . . . . 4-8 LOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 O OSD Factory Default Settings.
デバイスATEN Technology ACS-1208Aの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
ATEN Technology ACS-1208Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはATEN Technology ACS-1208Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ATEN Technology ACS-1208Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ATEN Technology ACS-1208Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ATEN Technology ACS-1208Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はATEN Technology ACS-1208Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ATEN Technology ACS-1208Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちATEN Technology ACS-1208Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
