Atlantis LandメーカーA02-WRA4-54Gの使用説明書/サービス説明書
ページ先へ移動 of 75
.
.
I-FLY WIRELESS ROUTER ADSL Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other nam es mentioned mat be trademarks or registered tradem arks of their respective owners. S ubject to change without notice. No liability for technical errors and/or omissions.
I-FLY WIRELESS ROUTER ADSL ii Table of Contents CHAPTER 1 .......................................................................... 1 1.1 A N O VERVIEW OF THE ADSL F IREWALL R OUTER ........ 1 1.2 P ACKAGE C ONTENTS ..................................
I-FLY WIRELESS ROUTER ADSL iii 3.6.3.1 LAN ................................................................................................................ 20 3.6.3.1.1 Ethernet .........................................................................
I-FLY WIRELESS ROUTER ADSL iv APPENDIX B ...................................................................... 68 S UPPORT ...............................................................................................................................
I-FLY WIRELESS ROUTER ADSL 1 Chapter 1 Introduction 1.1 An Overview of the ADSL Firewall Router Broadband Sharing and IP sharing The I-Fly Wireless Router ADSL supports 4 ports 10/ 100 Mbps auto-negotiating Fast Ethernet for connection to your local area network (LAN) and downstream (with built-in ADSL modem) rate up to 8Mbps.
I-FLY WIRELESS ROUTER ADSL 2 1.2 Package Contents • One I-Fly Wireless Router ADSL • One CD-ROM containing the online manual • One Quick Start Guide • One RJ-11 ADSL/telephone cable • One CA.
I-FLY WIRELESS ROUTER ADSL 3 • Universal Plug and Play (UPnP) and UPnP NAT Traversal: This protocol is used to enable simple and robust connectivity among stand-al one devices and PCs from many different vendors. It makes network simple and affordab le for users.
I-FLY WIRELESS ROUTER ADSL 4 site, the DHCP server can allocate up to 253 clie nt IP addresses and di stribute them including IP address, subnet mask as well as DNS IP addr ess to local com puters. It provides an easy way to manage the local IP network.
I-FLY WIRELESS ROUTER ADSL 5 1.4 I-Fly Wireless Router ADSL Application.
I-FLY WIRELESS ROUTER ADSL 6 Chapter 2 Using Wireless ADSL Router 2.1 Cautions for using the I-Fly Wireless Router ADSL Do not place the ADSL Wireless Router unde r high hum idity and high temperature. Do not use the same power source for ADSL Wireless Router with other equipment.
I-FLY WIRELESS ROUTER ADSL 7 2.3 The Rear Ports PORT MEANING 1 LINE Connect the supplied RJ-11 cable to this port when connecting to the ADSL/telephone network. 2 PS2(Console) Connect a RS-232 cable to this port when connecting to a PC’s RS-232 port (9-pin serial port).
I-FLY WIRELESS ROUTER ADSL 8 Chapter 3 Configuration The ADSL Wireless Router can be c onfigured with your Web browser. The web browser is included as a standard application in the following op eration system s, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, and etc.
I-FLY WIRELESS ROUTER ADSL 9 3.3 Configuring PC in Windows For Windows 95/98/ME 1. Go to Start / Settings / Control Panel . In the Control P anel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible , or the name of any Netw ork Interface Card (NIC) in your PC.
I-FLY WIRELESS ROUTER ADSL 10 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration.
I-FLY WIRELESS ROUTER ADSL 11 For Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control P anel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click “OK” .
I-FLY WIRELESS ROUTER ADSL 12 For Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Netw ork and Dial-up Connections . 2. Double-click LAN Area Connection . 3. In the LAN Area Connection Status window, click Properties .
I-FLY WIRELESS ROUTER ADSL 13 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.
I-FLY WIRELESS ROUTER ADSL 14 For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties .
I-FLY WIRELESS ROUTER ADSL 15 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 6.
I-FLY WIRELESS ROUTER ADSL 16 3.4 Factory Default Settings Before configurating this ADSL Wireless Router, you need to know the following default settings. • Username: admin • Password : atlantis • IP Address : 192.168.1.254 • Subnet Mask : 255.
I-FLY WIRELESS ROUTER ADSL 17 LAN Port WAN Port IP address 192.168.1.254 Subnet Mask 255.255.255.0 DHCP server function Enabled N/A 3.5 Information from the ISP Before configuring this device, you hav.
I-FLY WIRELESS ROUTER ADSL 18 You will get a status report web page when login successfully. At the configuration homepage, the left naviga tion page where bookmarks are provided links you directly to.
I-FLY WIRELESS ROUTER ADSL 19 • IPSec Status • L2TP • Email Status • Event Log • Error Log • NAT Sessions • UPnP PortMap When you click the ARP Table, you will see the data of the IP address of each PC in your LAN as well as its associated MAC address.
I-FLY WIRELESS ROUTER ADSL 20 3.6.2 Quick Start If you use this device to access the Internet thr ough the ISP, this web page is en ough for you to configure this router and access the Internet without a problem.
I-FLY WIRELESS ROUTER ADSL 21 3.6.3.1.1 Ethernet When you click Ethernet , you get the following picture below. It supports two Ethernet IP addresses in the LAN. With this function, the ADSL Wireless router can support two different IP. Usually, there is only one subnet in LAN and no need to configure a Secondary IP address.
I-FLY WIRELESS ROUTER ADSL 22 ESSID: Enter the unique ID given to the Access Point (A P), which is already bu il t-in to the router’s wireless interface.
I-FLY WIRELESS ROUTER ADSL 23 and Client card settings to generate the sa me WEP keys. Please note that you do not have to enter Key (0-3) as below when the Passphrase is enabled. Default Used WEP Key: Select the encrypti on key ID, please refer to Key (0-3) below.
I-FLY WIRELESS ROUTER ADSL 24 default is Auto, which users should keep unless there are specific prob lem s with PCs not being able to access your LAN. IPv4 TOS priority Control (Advanced users): TOS, Type of Services, is the 2nd octet of an IP packet.
I-FLY WIRELESS ROUTER ADSL 25 Primary/Secondary DNS Server Address : Insert here rem ote DSN server addresses, it will be forwarded to LAN hosts by DHCP server.
I-FLY WIRELESS ROUTER ADSL 26 • PPPoA Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer.
I-FLY WIRELESS ROUTER ADSL 27 RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function. MTU: Maximum Transmission Unit. The size of the largest datagram (excluding mediaspecific headers) that IP will attempt to send through the interface.
I-FLY WIRELESS ROUTER ADSL 28 Always on: If you want the router to establish a PPPoE session when starting up and to automatically re-establish the PPPoA session when disconnected by the ISP. Connect to Demand: If you want to establish a PPPoE se ssion only when there is a packet requesting access to the Internet (i.
I-FLY WIRELESS ROUTER ADSL 29 • RFC 1483 Routed/RFC1 1577(IPoA) Description: Your description of this connection. VPI and VCI: Enter the information provided by your ISP.
I-FLY WIRELESS ROUTER ADSL 30 3.6.3.2.2 DNS A Domain Name System (DNS) contains a mapping ta ble for domain name and IP addresses. In the Internet, every host has a unique and friendly name such as www.yahoo.com and an IP address. As the IP Address is hard to remember, the DNS converts the friendly name into its equivalent IP Address.
I-FLY WIRELESS ROUTER ADSL 31 3.6.3.3.1 Time Zone When you click Time Zone , you get the following figure. The router does not have a real time clock on board ; instead, it uses the simple network tim e protocol (SNTP) to get the current time fr om the SNTP server from the out side network.
I-FLY WIRELESS ROUTER ADSL 32 3.6.3.3.3 Firmware Upgrade When you click Firmware Upgrade , it allows you to input the locati on of firmware stored on your PC and click the Upgrade button to upgrade to the new firmware. Do NOT upgrade firmware on any At lantis Land product over a wireless connection.
I-FLY WIRELESS ROUTER ADSL 33 3.6.3.4 Firewall Your router includes a full SPI (Stateful Packet Inspec tion) firewall for contro lling Internet access from your LAN, as well as helpi ng to prevent attacks fr om hackers. In addition to this, when using NAT (Network Address Translation.
I-FLY WIRELESS ROUTER ADSL 34 Firewall Security : W hen you enable Firewall function, you can select one of th e firewall security policies. All blocked/User-defined: By default, all of tra ffic between WAN and LAN are blocked. You have to configure the type of traffic passed between WAN and LAN, please refer to Packet Filter below.
I-FLY WIRELESS ROUTER ADSL 35 Firewall Logging: When both of Firewall Security and Fire wall Logging are enabled, the device will detect the blocked and/or intrusion packets, once the setting has configured. Then the router will log the corresponding (blocking or intrusion detection) logs in to the Event Log under Status.
I-FLY WIRELESS ROUTER ADSL 36 3. Click Delete to delete the HTTP rule. 4. Click Add TCP Filter. 5. Input the port number and se t the inbound & outbound as Allow.
I-FLY WIRELESS ROUTER ADSL 37 6. The port filter rule of HTTP is shown as below. 3.6.3.4.2 INTRUS ION DETECTION The router’s Intrusion Detection S ystem (IDS) is used to detect hacker attacks and intrusion attempts from the Internet.
I-FLY WIRELESS ROUTER ADSL 38 • Scan Attack Block Duration : This is the duration for blocki ng hosts that attempt a possible Scan attack. Scan attack types include X’mas scan, IMAP SYN/FIN scan and similar attempts. Default value is 86400 seconds.
I-FLY WIRELESS ROUTER ADSL 39 SrcPort: 0 or 65535 SYN/FIN/RST/ACK Scan TCP, No Existing session And Scan Hosts more than five Src IP Scan Yes Yes Net Bus Scan TCP No Existing session DstPort = Net Bus.
I-FLY WIRELESS ROUTER ADSL 40 Keywords Filtering: Allows blocking by specific keywords within a pa rticular URL rather than having to specify a complete URL (e.
I-FLY WIRELESS ROUTER ADSL 41 3.6.3.4.5 Firewall Log Firewall Log display log information of any unexpected action with your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the Status – Event Log after enabling.
I-FLY WIRELESS ROUTER ADSL 42 3.6.3.5 VPN Your router support 2 main types of VPN (Virtual Private Network), PPTP and IPSec, and these are the two major section choices from the m enu on the left. Click Create to select one of applicatio ns to continually setup.
I-FLY WIRELESS ROUTER ADSL 43 before sending, and also allows for challenges at differe nt periods to ensure that the client has not been replaced by an intruder. Data Encryption: Data sent over the VPN connection ca n be encrypted by an MPPE algorithm.
I-FLY WIRELESS ROUTER ADSL 44 Configuring PPTP VPN in the Office LAN Router The input IP address 192.168.1.200 will be ass igned to the remote worker, please m ake sure this IP is not used in the Office LAN. Configuring PPTP VPN in Remote Side You can configure VPN client with commercial VPN client software package (e.
I-FLY WIRELESS ROUTER ADSL 45 3. Enter the IP address of the ADSL Router located in the offi ce Lan (or Dynamic DNS name). 4. Follow the step, the following screen appears.
I-FLY WIRELESS ROUTER ADSL 46 5. To make the connection, click the Virtual Private C onnection icon in Di al-up Networking Group, and input the username & pa ssword set in ADSL Router.
I-FLY WIRELESS ROUTER ADSL 47 An Example of Configuring a Remote Access PPTP VPN Dial-out Connection Background of the Example Corporate establishes a PPTP VPN connection with th e file server located in the remote side. The router is installed in the office, conn ected with a couple of PCs and Servers.
I-FLY WIRELESS ROUTER ADSL 48 PPTP Status This shows details of your configured PPTP VPN Connections. Name: The name you assigned to the particular PP TP connection in your VPN configuration. Type: The type of connecti on (dial-in/dial-out). Enable: Whether the connection is currently enabled.
I-FLY WIRELESS ROUTER ADSL 49 An Example of Configuring a LAN-to-LAN PPTP VPN Connection Background of the Example The Remote LAN establishes a PPTP VPN tunnel with the Office LAN to connect two private networks by leveraging th e Internet infrastructu re.
I-FLY WIRELESS ROUTER ADSL 50 Configuring PPTP VPN in the Office Lan The input IP address 192.168.2.200 will be as signed to th e router located in the Remote LAN. Please make sure this IP is not used in the head office LAN. Configuring PPTP VPN in the Remote Lan The input IP address 69.
I-FLY WIRELESS ROUTER ADSL 51 PPTP Status in the Office LAN This shows details of your configured PPTP VPN Connections. Name: The name you assigned to the particular PP TP connection in your VPN configuration. Type: The type of connecti on (dial-in/dial-out).
I-FLY WIRELESS ROUTER ADSL 52 VPN - IPSec The router supports IPSec VPN to establish secu re, end-to-end private network connections over a public networking infrastructure. Connection Name: A user-defined name for the connection (e.g. “To Remote Lan or To Office LAN ”).
I-FLY WIRELESS ROUTER ADSL 53 • MD5: A one-way hashing algorithm that produces a 128-bit hash. • SHA-1: A one-way hashing algorithm that produces a 160-bit hash. • Encryption: Select the encryption method from the pu ll-down menu. There are four options, DES, 3DES, AES and NONE.
I-FLY WIRELESS ROUTER ADSL 54 SA Lifetime: Specify the number of minutes th at a Security Association (SA) will st ay active before new encryption and authentication key will be exchanged. There ar e two kinds of SAs, IKE and IPSec. IKE negotiates and establishes SA on behalf of IPSec, an IKE SA is used by IKE.
I-FLY WIRELESS ROUTER ADSL 55 An Example of Configuring a LA N-to-LAN IPSec VPN Connection Remote LAN Office LAN Product Code A02-RA3+ A02-WRA4-54G Picture Public IP 69.121.1.31 69.121.1.32 NAT Yes Yes LAN IP 192.168.1.X 192.168.2.X Subnet Mask 255.255.
I-FLY WIRELESS ROUTER ADSL 56 Configuring IPSec VPN in the Office LAN Configuring IPSec VPN in the Remote LAN.
I-FLY WIRELESS ROUTER ADSL 57 3.6.3.6 QoS QoS function helps you to control your network tr affic for each application from LAN (Ethernet and/or Wireless) to WAN (Internet). It facilitate s you to control the different quality and speed of through put for each application when the system is running with full loading of upstream.
I-FLY WIRELESS ROUTER ADSL 58 3.6.3.6.2 IP Throttling IP Throttling allows you to limit th e speed of IP tr affic. The value entered will limit the speed of the application that you set to the sp ecified value’s multiple of 32kbps. The trigger of check can base on IP pr otocol, port number and address as well.
I-FLY WIRELESS ROUTER ADSL 59 3.6.3.7 Virtual Server When you click Virtual Server, you get the following figure. Being a natural Internet firewall, this network r outer p rotects your networ k from being accessed by outside users. When it needs to allow outside users to access internal server s, e.
I-FLY WIRELESS ROUTER ADSL 60 server IP address manually, but it is stil l in the same subnet with the router. 3.6.3.8 Advanced There are two items under the Adva nced section, Static Routing, D ynamic DNS & Checking Emails.
I-FLY WIRELESS ROUTER ADSL 61 3.6.3.8.2 Dynamic DNS Click Dynamic DNS to get the below figure then check th e “Enable” button to access the Dynam ic DNS service. The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname.
I-FLY WIRELESS ROUTER ADSL 62 Disable: Check to disable the ADSL Firewall Router from getting the email. Enable: Check to enable the ADSL Firewall Router to get the em ail by providing required information. Hence, the following fields will be activated and required.
I-FLY WIRELESS ROUTER ADSL 63 Embedded Web Server: HTTP Port: This is the port number the route r’s embedded web server (for web-based configuration) will use. The default value is the s tandard HTTP port, 80. Users m ay specify an a lternative if, for example, they are running a web serv er on a PC within their LAN.
I-FLY WIRELESS ROUTER ADSL 64 Simple Network Management Protocol: SNMP Access Control (Software on a PC within the LAN is required in order to utilize this function) SNMP V1 and V2: • Read Community: Specify a name to be identifie d as the Read Community, and an IP address.
I-FLY WIRELESS ROUTER ADSL 65 PPP IP Group • RFC 1474 (PPP/Bridge MIB): PPP Bridge Group • RFC1573 (IfMIB): ifMIBObjects Group • RFC1695 (atmMIB): atmMIBObjects • RFC 1907 (SNMPv2): only snmpSetSerialNo OID 3.
I-FLY WIRELESS ROUTER ADSL 66 Chapter 4 Troubleshooting If the ADSL Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service provider. This could save you time and effort but if the symptoms persist, then c onsult your service provider.
I-FLY WIRELESS ROUTER ADSL 67 APPENDIX A Specification Technical Features Protocols IP, NAT, PPTP, ARP, ICMP, DHCP( server, relay and client), PPTP client, RIP1/2 , SNMP, SNTP client, UPnP, Telnet ser.
I-FLY WIRELESS ROUTER ADSL APPENDIX B Support Support If you have any problems with the I-Fly Wireless ADSL Router , please consult this m anual. If you continue to have problems you should contact the dealer where you bought this ADSL Router.
I-FLY WIRELESS ROUTER ADSL 69 All brand and product names mentioned in th is manual are trademarks and/or registered trademarks of their respective holders.
デバイスAtlantis Land A02-WRA4-54Gの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Atlantis Land A02-WRA4-54Gをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAtlantis Land A02-WRA4-54Gの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Atlantis Land A02-WRA4-54Gの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Atlantis Land A02-WRA4-54Gで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Atlantis Land A02-WRA4-54Gを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAtlantis Land A02-WRA4-54Gの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Atlantis Land A02-WRA4-54Gに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAtlantis Land A02-WRA4-54Gデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。