Phoenix Goldメーカーpm950の使用説明書/サービス説明書
ページ先へ移動 of 20
DECLARATION OF CONFORMITY CARVER PROFESSIONAL INTERNATIONAL (supplier ’ s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm700/950 (na.
Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pm700 and pm950 are specially designed for pro sound applications.
Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pm700 and pm950 are specially designed for pro sound applications.
pm7 00 • 225W per channel into 8 ohms 350W per channel into 4 ohms 700W mono into 8 ohms • XLR and 1/4” TRS input connectors • Accepts balanced or unbalanced lines • Multi-way Binding Post o.
pm7 00 • 225W per channel into 8 ohms 350W per channel into 4 ohms 700W mono into 8 ohms • XLR and 1/4” TRS input connectors • Accepts balanced or unbalanced lines • Multi-way Binding Post o.
Power Output: (20 Hz to 20kHz, with no more than 0.1%) 325 watts per channel into 8 ohms 475 watts per channel into 4 ohms Bridged Mono: 950 watts into 8 ohms at 1kHz, with no more than 0.1% THD Dynamic Headroom: >2.0 dB Frequency Response: 20Hz to 20kHz (±0.
Power Output: (20 Hz to 20kHz, with no more than 0.1%) 325 watts per channel into 8 ohms 475 watts per channel into 4 ohms Bridged Mono: 950 watts into 8 ohms at 1kHz, with no more than 0.1% THD Dynamic Headroom: >2.0 dB Frequency Response: 20Hz to 20kHz (±0.
6 7 8 9 10 11 12 6. BRIDGED OPERATION The STEREO/MONO switch is located just behind the input panel. This switch is used to select between NORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation. For NORMAL STEREO operation, use CH 1 and CH 2 inputs.
6 7 8 9 10 11 12 6. BRIDGED OPERATION The STEREO/MONO switch is located just behind the input panel. This switch is used to select between NORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation. For NORMAL STEREO operation, use CH 1 and CH 2 inputs.
model and enough current to allow full-power operation of all the amplifiers plugged into it. The current demand of a power amplifier varies depending on several factors, including the impedance of the load, the output level of the amplifier, and the crest factor and duty cycle of the program material.
model and enough current to allow full-power operation of all the amplifiers plugged into it. The current demand of a power amplifier varies depending on several factors, including the impedance of the load, the output level of the amplifier, and the crest factor and duty cycle of the program material.
Output Wiring Use heavy gauge wire for speaker connections. The greater the distance between the amplifier and the speakers, the larger the diameter the wire should be to minimize power losses across the wire and improve the damping of the speaker .
Output Wiring Use heavy gauge wire for speaker connections. The greater the distance between the amplifier and the speakers, the larger the diameter the wire should be to minimize power losses across the wire and improve the damping of the speaker .
Oper a ting Tips Using the pm700 / pm950 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want.
Oper a ting Tips Using the pm700 / pm950 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want.
Figure 9 Input Polarity The XLR input connectors on the pm700 / pm950 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. The polarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board.
Figure 9 Input Polarity The XLR input connectors on the pm700 / pm950 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. The polarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board.
W arranty Informa tion Professional Power Amplifiers: 5 years WHA T IS COVERED: THIS W ARRANTY COVERS DEFECTS IN MATERIAL AND WORKMANSHIP ONL Y. This limited W arranty DOES NOT extend to: 1) Damage ca.
W arranty Informa tion Professional Power Amplifiers: 5 years WHA T IS COVERED: THIS W ARRANTY COVERS DEFECTS IN MATERIAL AND WORKMANSHIP ONL Y. This limited W arranty DOES NOT extend to: 1) Damage ca.
DECLARATION OF CONFORMITY CARVER PROFESSIONAL INTERNATIONAL (supplier ’ s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm700/950 (na.
デバイスPhoenix Gold pm950の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Phoenix Gold pm950をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPhoenix Gold pm950の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Phoenix Gold pm950の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Phoenix Gold pm950で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Phoenix Gold pm950を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPhoenix Gold pm950の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Phoenix Gold pm950に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPhoenix Gold pm950デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。