PioneerメーカーAVIC-N5の使用説明書/サービス説明書
ページ先へ移動 of 188
Operation Manual D VD MUL TIMEDIA A V NA VIGA TION SER VER A VIC-N5 Notice to all users: This software requires that the navigation system is properly connected to your vehicle ’ s par king brake and depending on your v ehicle, additional installation may be required.
The screens shown in the examples may differ from the actual screens. The actual screens may be changed without notic e for per formance and function improvements.
– Reset the navigation system to the initial (factory) setting 28 DVD Map Discs for Y our Navigation System 29 – Configuration of data recorded on discs 29 Initial Use 29 Basic Operation Navigatio.
– Editing a way point 55 – Skipping a way point 56 Setting Areas to Avoid 56 – Registering an area to avoid 56 – Changing or deleting an area to avoid 57 Displaying Certain POI on the Map 57 R.
Using the A V Source (Built-in DVD Drive and Radio) How to Display each Menu 86 Operating the Built-in DVD drive 87 – Switching the media files type 89 – T ouch panel key operation (DVD- V) 89 –.
– Using the MyMix function 111 – Using the direct traffic announcement function 112 – Display the Radio ID 112 – Advanced SIRIUS tuner operation 112 Hands-free Phoning 113 – Hands-free phoni.
– Introduction to audio adjustments 131 – Using the equalizer 131 – Using balance adjustment 131 – Adjusting equalizer cur ves 132 – Setting the simulated sound stage 132 – Adjusting loudn.
– When the positioning by GPS is impossible 164 V ehicles that Cannot Obtain Speed P ulse Data 164 Conditions Likely to Cause Noticeable P ositioning Errors 164 About the Data being Deleted 167 Limi.
License Agreement PIONEER A VIC-N5 - for U.S.A. THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS (USA) INC. ( “ PIONEER ” ). PLEASE READ THE TERMS AND CONDI- TIONS OF THIS AGREEMENT CAREFULLY BE- FORE USING THE SOFTWARE INST ALLED ON THE PIONEER PRODUCTS.
3 LIMIT A TION OF LIABILITY IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CLAIM OR L OSS IN- CURRED BY YOU (INCLUDING, WITHOUT LIM- IT A TION, COMPENSA TORY , INCIDENT AL, INDIRECT , SPECIAL, C.
PIONEER A VIC-N5 - for Canada THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS OF CANADA, INC. ( “ PIONEER ” ). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CARE- FULL Y BEFORE USING THE SOF TWARE IN- ST ALLED ON THE PIONEER PRODUCTS.
3 LIMIT A TION OF LIABILITY IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CLAIM OR L OSS IN- CURRED BY YOU (INCLUDING, WITHOUT LIM- IT A TION, COMPENSA TORY , INCIDENT AL, INDIRECT , SPECIAL, C.
T erms and Conditions for the T ele Atlas Data THIS IS A LEGAL AGREEMENT (THE “ AGREE- MENT ” ) BETWEEN YOU, THE END USER, AND TELE A TL AS NORTH AMERICA, INC. ( “ T ele Atlas ” ). BY USING YOUR COPY OF THE TELE A TLAS DAT A, YOU AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT .
6 Indemnity . Y ou agree to indemnify, defend and hold T ele Atlas, its Licensors, and its Suppliers (includ- ing their respective licensors, suppliers, as- signees, subsidiaries, affiliated companies.
In addition to the W arranties contained in the Agreement, YOU UNDERST AND THA T THE POIS ARE LICENSED ON AN “ AS IS ” BASIS WITHOUT GUARANTEE, AND THERE ARE NO OTHER WARRANTIES MADE WHETHER , EXPRESS OR IMPLIED, INCL UDING WITHOUT LIMIT ATION, ANY EXPRESS OR IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A P ARTICULAR PURPOSE.
Copyright Notices for North American data 1) T ele Atlas ® MultiNet ® North America data. As of the Effective Date, the copyright notice for T ele Atlas ® MultiNet ® North America is: NOTICE © 1984 – 2008 T ele Atlas.
Customizing Y our Navi gation System The behavior of your navigation system de- pends on a number of settings. If you need to change any of the initial settings (default settings), read the relevant section of this chapter . Using the AV Source (Built-in DVD Drive and Radio) Describes how to use DVD-Video, CD, ROM, DivX and the radio.
Important Safety Information Before using your navigation system, be sure to read and fully understand the following safety information: p Read the entire manual before operating this navigation system.
Notes Before Using the System Information to User Alteration or modifications carried out without appropriate authorization may invalidate the user ’ s right to operate the equipment. For Canadian model This Class B digital apparatus complies with Canadian ICES-003.
Precaution CAUTION: USE OF CONTROL OR ADJUSTMENT OR PER- FORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESUL T IN HAZARDOUS RADIA TION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HA- ZARD. ! Protect this product from moisture.
! In some countries the viewing of “ Video image ” on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply , they must be obeyed.
WARNING ! SCREEN IMAGE MAY APPEAR REVERSED. ! USE INPUT ONL Y FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESUL T IN INJURY OR DAMAGE. CAUTION ! The rear view camera function is to be used as an aid to keep an eye on trailers, or while backing up.
DVD-Video playback It is possible to play back DVD- Video, DVD-R (video mode) and DVD-RW (video mode). p Remember that use of this system for com- mercial or public viewing purposes may constitute an infringement on the author ’ s rights protected by the Copyright Law .
Hands-free phoning Using Bluetooth adapter (e.g. CD-BTB200) (sold separately), this unit realizes effortless hands-free phoning with Bluetooth wireless technology . Bluetooth audio player compatibility Using a Bluetooth adapter (e.g. CD -BTB200) (sold separately), you can control a Bluetooth audio player featuring Bluetooth wireless tech- nology .
Data communication function with XM tuner If you connect the optional XM tuner (GEX- P10XMT) to the navigation system, you can use traffic information as a part of the naviga- tion function.
About A VCHD recorded discs This unit is not compatible with discs recorded in AVCHD (Advanced Video Codec High Defi- nition) format. Do not insert AVCHD discs. If inserted, the disc may not be ejected. About Dual layer disc The unit cannot play back DVD-R/-RW discs that are written in Layer Jump Recording mode.
! There may be a slight delay when starting playback of WMA files encoded with image data. About AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG -2 and MPEG-4.
© 2008 XM Satellite Radio Inc. All rights re- ser ved. NAVTEQ T raffic ™ is a trademark of NAVTEQ North America, LLC. © 2008 . NAVTEQ North America, LLC. T o Protect the LCD Panel and Screen p Do not allow direct sunlight to fall on the LCD screen when this product is not being used.
! If there appear to be problems with the op- eration of the system. ! When changing the combination of the equipment. ! When adding/removing additional pro- ducts that connect to the navigation sys- tem. p If you have connected other equipment (for example, Bluetooth adapter) to this naviga- tion system, be sure to reset that equip- ment too.
Navigation unit This chapter gives information about the names of the parts and the main features using the buttons. 1 Disc indicator When a disc is set in navigation system, this indicator lights. 2 LCD panel 3 LCD screen 4 A V button Press to display the AV operation screen.
e Disc loading slot f Sub display Displays the current time or information about the AV source that is currently play- ing. g VOLUME knob T urn to adjust the AV (Audio and Video) vo- lume or press to change the AV source. Press and hold VOLUME knob to switch the source to mute.
— When the ignition switch is turned ON again (or turned to ACC), the LCD panel will open automatically . — Removing or attaching the front panel will automatically close or open the LCD panel. = F or details concerning operations, refer to Removing the front panel on the next page.
1 Press and hold OPEN/CLOSE button. Flap Setup screen appears. 2 T ouch [Flap Set Back]. T ouching [ Flap Set Back ] switches between [ On ] and [ Off ]. Setting the automatic open function When you do not wish the display to open/ close automatically, you can set the automatic open function to the manual mode.
About NA VI MENU and A V MENU The methods for displaying NAVI MENU , used for navigation operations, and A V MENU , used for AV operations, are different depending on which screen is currently displayed.
Basic flow of operation 1 P ark your vehicle in a safe place, and apply the parking brake. j 2 Insert the P ioneer DVD Map Disc to the disc loading slot. j 3 P ress MAP button to display the map screen. j 4 P ress MENU button to display NAVI MENU . j 5 T ouch [ Destination ] to display Destination menu.
7 Input the house number and touch [OK]. T ouch the characters you wish to input. : The input text is deleted letter by letter from the end of the text. Continuing to this will de- lete all of the text. Back : Returns you to the previous screen. p Y ou may also input a prefix to the house number .
In the selected area, if you touch [ City ] without entering the name of the city or area, you can set the cities or areas that you have searched in the past from the list. (This function is not available in the first time and when you have selected an area that you have never searched before.
! Y our destination = If you want to search for another route, refer to Recalculating the Route to Y our Des- tination on page 55. = If you want to cancel the route guidance, refer to Canceling the Route Guidance on page 53. p T ouching the allows you to hear the information again.
Basic A V Source This section describes basic AV operations, such as adjusting the volume, switching the source and stopping the source, using CD op- erations as an example. Selecting an A V source 1 Press VOLUME knob (or A V button) to switch to the AV operation screen.
T ur ning the source off 1 Press VOLUME knob (or A V button) to switch to the AV operation screen. 2 Press MENU button to change to A V MENU. 3 T ouch [OFF] in A V Source screen. p P ress and hold VOLUME knob to switch the source to mute. How to listen to a CD Y ou can listen to an audio CD by removing the DVD Map Disc from the navigation system.
Y ou can also per form fast rewind/fast forward by holding o or p button on the hard- ware. 7 T o hide the touch panel key , touch [Hide]. Information of the Audio source being played Distance to the guidance point Current direction of travel Next direction of travel p If you touch the screen, the touch panel keys are displayed again.
This section describes the basic navigation op- erations, including how to display NA VI MENU and how to use Shortcut menu and the map screen. How to Use Menu Screens There are two types of navigation menu: “ NA VI MENU ” and “ Shortcut menu ” .
Settings menu Set the navigation functions so they can be used easily . = For details concerning operations, refer to Chapter 6. 3 If you want to return to the map, press MAP button.
How to Use the Map Most of the information provided by your navi- gation system can be seen on the map. Y ou need to get to know how the information that appears on the map. Switching the current position screen display mode There are four types of map display and two additional view modes.
Guide View Overlays two arrows onto the standard map ( “ Map View ” ). 1 5 g 4 a8 2 f b ch 6 7 93 Route View Displays the name of the street you will travel along next and an arrow indicating the direc- tion of travel. 1 5 g d 4 a8 2 f b c h 6 7 9 3 V ehicle Dynamics Display Indicates the status of your vehicle.
Enlarged map of the intersection When [ Close-up of Junction ]i n Settings menu is [ On ], an enlarged map of the junction appears. When driving on a freeway , a special guide illustration is displayed.
= Refer to Changing the scale of the map on this page. 8 Map scale The scale of the map is indicated by dis- tance. = Refer to Changing the scale of the map on this page. 9 TRAFFIC icon This appears when an XM tuner (GEX- P10XMT , sold separately) is connected, and traffic information is received.
p In memor y navi mode and/or when traver- sing an area not stored on the disc, selec- tion of the scales is limited. Direct scale key p The icon of a registered location and the traffic information icons are displayed when the map scale is 10 miles (20 km) or lower .
2 T ouch . Information for a specified location appears. The displayed information varies according to the location. (There may be no information for that location.) = For details, refer to Editing Registered Loca- tions on page 62. = For details, refer to Displaying Certain POI on the Map on page 57.
CAUTION For safety reasons, these route-setting functions are not available while your vehicle is in motion. T o enable these functions, you must stop in a safe place and put on the parking brake before setting your route (refer to Parking brake interlock on page 20).
Finding a POI in your surroundings Y ou can search for P oints Of Interest in your surroundings on the map. Use it to find a POI to visit during a journey . 1 T ouch [Destination] in NAVI MENU, and then touch [Vicinity Search]. 2 T ouch the desired category .
p [ Vicinity Search ]i n NA VI MENU searches your surroundings. On the other hand, when using in Shortcut menu ( d P age 43), the area around the scroll cursor will be searched. Setting an Entrance or Exit of a Freeway as Y our Destination Y ou can set the entrance or exit of a freeway as your destination.
1 T ouch [Destination] in NAVI MENU, and then touch [Address Book] or [Destination History]. 2 T ouch your destination name. Route calculation starts. p Y ou can also see the destination by touch- ing on the right of the list. = For details concerning operations, refer to When appears to the right of the list on page 49.
p If there are multiple way points, selecting [ W ay Point ] displays a list of the way points on the route. T ouch the place you want to start scrolling from. 4 T ouch or to scroll the map. T o continue scrolling after you release your fin- ger , touch and hold or .
1 T ouch the map screen. Shortcut menu appears. 2 T ouch . 3 T ouch [Route Profile] or [Route Scrol l]. = About “ Route Profile ” , refer to Checking the set route by text on the previous page. = About “ Route Scroll ” , refer to Checking the set route with the map on page 53.
Add : Switch the display to search for points. After searching for a point, display it on a map, then touch [ OK ] to add to the way points. (Y ou can add up to 5 way points in total.) Delete : Y ou can delete way points from the list. (Y ou can delete way points successively.
p If you select [ Map Search ], move the scroll cursor to the place you want to set and touch [ OK ]. 5 Change the map scale and decide the size of the Area to Avoid. The Area to avoid is enclosed in a red frame. Y ou can also change the map scale though the maximum map scale for registering Areas to Avoid is 0.
p If you touch one of the POI shortcuts (e.g. ), you can start searching for POI directly in the selected category on the POI short- cut. 3 Press MAP button. POI ’ s in the selected categor y appear on the map. p Y ou can also display POI by using Shortcut menu if [ Overlay POI ] is selected on [ Short-Cut Selection ].
Modifying the Route Calculation Conditions Y ou can change the route calculation condi- tions using Route Options menu. The follow- ing description features an example of changing the number of routes to be searched. 1 T ouch [Route Options] in NA VI MENU.
Calculate a route that may include ferries. p The system may calculate a route that in- cludes ferries even if [ On ] is selected. Avoid T oll Road This setting controls whether toll roads (in- cluding toll areas) should be taken into ac- count. On : Calculate a route that avoids toll roads (includ- ing toll areas).
p After the route is calculated, it may take some time until the detailed route informa- tion ( Route Profile ) is displayed. 5 T ouch [OK]. The route you selected is accepted, and the map of your surroundings appears. When you start driving, the route guidance begins.
CAUTION For safety reasons, you cannot use some of these navigation functions while your vehicle is in mo- tion. T o enable these functions, you must stop in a safe place and apply the parking brake (refer to P arking brake interlock on page 20). Editing Registered Locations Address Book can store up to 300 registered locations.
2 T ouch on the right-hand side of the place you want to register in Address Book. : The map of that place can be displayed. = For details concerning operations, refer to When appears to the right of the list on page 49. 3 T ouch [Registration]. 4 T ouch [Save].
5 Sound The selected operating sound is played. 6 Modify Location Y ou can change the registered location by scrolling the map. 4 T ouch [Save]. Completes the registration. Changing a name 1 T ouch [Edit Name]. 2 Enter a new name; touch [OK]. The name of the current location appears in the text box.
p Because deleted data cannot be restored, take extra care not to select [ Delete All Ad- dress Book Entries ] and [ Delete All Desti- nations ] by mistake. Changing the position of locations registered in Address Book Y ou can select a location registered in Ad- dress Book , display a map of its surroundings and change its position.
Using XM NavT raffic Information If you have a GEX-P10XMT XM Digital Satellite Data & Audio Receiver (sold separately) at- tached to the navigation system, and have an active subscription to XM NavT raffic service, you can view current traffic conditions and in- formation on your navigation display.
p T ouching an incident you want to see allows you to view the detailed information of the incident. If the information cannot be dis- played on one screen, touch or to view the remaining information. 4 T ouch [Back] to return to the list with traffic information.
Distance from the current position of your vehicle to the point of entr y into the new route Difference in distance and travel time betw een existing route and new route On this screen, you can select the following items: New : A new route is displayed on the screen.
T raffic flow information When the map scale is between 0.02 mile (25 m) to 0.75 mile (1 km), red, yellow , or green blinking lines may appear on either side of a road. These colors indicate the average speed at which traffic is flowing along these streets.
p T ouch [ Back ] to not add the selected traffic information. 4 T ouch [Done]. The selected traffic information icon is added to the screen. p The following types of traffic congestion cannot be deselected and are always dis- played: stop and go, stopped traffic, and closed/blocked roads.
p The method for inputting the text is the same as for inputting street names. Refer to How to set your destination by ad- dress on page 35. p If the input ticker symbol does not match the actual ticker symbol for the stock com- pletely , you may not be able to find it.
1 Store the desired item (topic). = Refer to Storing browsable information on the previous page. 2 T ouch [Info/T raffic] in NA VI MENU, and then touch [My Favorites]. A list of registered items (topics) appears on the screen. T ouch the item to display informa- tion about this item.
WARNING The Emergency Info screen is only intended to provide information to a driver that may be useful during an emergency situation, and does not re- place the need to call for emergency assistance, when necessary. Checking the information register ed as Emergency Info % T ouch [Info/T raffic] in NA VI MENU, and then touch [Emergency Info].
4 Input the number you wish to register , and then touch [OK]. Edit VIN : Register your Vehicle ’ s Identification Number . (Y ou can enter between 1 and 17 digits.) Edit Policy number : Register your insurance policy number . Edit Insurance Phone : Register your insurance company ’ s phone number .
5 T ouch the name of the facility to set the route you want. Displays the route to the selected facility . When appears to the right of the list Y ou can also set a destination by touching to the right of the destination list such as Ad- dress Book . T ouch [ OK ] to confirm.
p Progressive format JPEG pictures cannot be used. 1 Insert a disc to the disc loading slot. 2 T ouch [Settings] in NAVI MENU, then touch [System Options]. 3 T ouch [Background Picture Setting]. The picture selected for each screen is indi- cated on the right side of [ Splash Screen ], [ Navigation Background ] and [ A V Back- ground ] items.
Until the sensor ’ s initial learning is complete, only the voltage and clock are displayed. 1 Switch to V ehicle Dynamics Display . = For details concerning operations, refer to Switching the current position screen display mode on page 44. 2 T ouch the left or right instrument.
4 Degree of learning Sensor learning situations for distance ( Dis- tance ), right turn ( Right T urn ), left turn ( Left T ur n ) and 3D detection ( 3D ) are indi- cated by the length of bars.
5 Power V oltage The power supply (reference value) provided from the vehicle batter y to the navigation system is shown. If the voltage does not fall within the range of 11 V to 15 V , check that power cable connection is correct. 6 Illumination When the headlights or small lamps of a ve- hicle are on, [ On ] is displayed.
CAUTION For safety reasons, you cannot use some of these navigation functions while your vehicle is in mo- tion. T o enable these functions, you must stop in a safe place and apply the parking brake (refer to P arking brake interlock on page 20).
On *: During voice guidance, the volume of the AV source is muted automatically . Off : V olume of the AV source stays the same dur- ing voice guidance. p When [ V oice Guidance ]i s [ On ], be sure to set [ Mute Input/Guide ] setting in AV MENU to [ Mute ]o r[ AT T ].
Short-Cut Selection Select shortcuts to display on the map screen. In the list displayed onscreen, the items with red checks are displayed on Shortcut menu . T ouch the shortcut you wish to display and then touch [ Done ] when a red check appears. Y ou can select up to three shortcuts.
T racking Display The tracking display setting has the following options. Always : Display tracking for all journeys. This T rip : Display tracking dots but erase them when the navigation system is turned off (when turning off the engine of your vehicle).
Continuously touching c , d , a or b allows you to rapidly scroll the map screen. p An area not stored in the DVD Map Disc cannot be memorized. Around Current Route : Sets the surrounding currently set route to the memor y area. The route to the destination will appear on screen.
Hardware Info T ouch [ Hardware Info ]i n Settings menu to display . Connection Status = F or details, refer to Checking the connec- tions of leads and installation positions on page 78. 3D Calibration = F or details, refer to Checking the Navigation Status on page 77.
This chapter describes how to display AV MENU for AV operations and per form opera- tions with the DVD drive and radio. How to Display each Menu 1 Press VOLUME knob (or A V button) to switch to the AV operation screen. 2 Press MENU button to change to A V MENU.
F unction menu Sound menu System menu 1 2 3 p When the source is [ OFF ], [ Function ] key changes to [ Initial ] key . 1 Function key T ouch to enter Function menu for each source.
DVD-Video 12 3 7 5 64 CD 8 1 a 9 4 ROM (MP3/WMA/AAC files) 1c 8 a9 b d 4 DivX 13 6 4 ce f See the following pages for instructions on op- erating each type of disc. = Refer to T ouch panel key operation ( DVD-V ) on the next page. = Refer to T ouch panel key operation ( CD , ROM ) on page 93.
b Current folder name indicator c Folder number indicator d File type indicator e Audio indicator f Repeat indicator Switching the media files type When playing a disc containing a mixture of various media file types such as DivX and MP3, you can switch between media files types to play .
2 Skip the chapter forward or backward T ouching p skips to the start of the next chapter . T ouching o once skips to the start of the current chapter . T ouching again will skip to the previous chapter . p Y ou can also select a chapter by pressing o or p button on the hardware.
p This function is available for DVD - Video. p Y ou can display the menu by touching [ Menu ]o r[ TOP M. ] while a disc is playing. T ouching either of these keys again lets you start playback from the location selected from the menu. For details, refer to the in- structions provided with the disc.
1 T ouch [Search] and then touch desired item. When playing a DVD, touch [ Title ] (title), [ Chapter ] (chapter) or [ Time ] (time). 2 T ouch 0 — 9 to input the desired num- ber . For titles and chapters ! T o select 3, touch 3. ! T o select 10, touch 1 and 0 in order .
T ouching [ B.Mark ]; Y ou can bookmark a point for every five disc. If you tr y to memorize a point for the same disc, the oldest bookmark will be replaced by the new one.
Displaying text information % T ouch . The next piece of information is displayed. ! Album Title (album title) ! T rack Title (track title) ! Folder Title (folder title) ! File Name (file name) ! Arti.
p If you select another folder during repeat play , the repeat play range changes to [ Disc ]. p If you per form fast forward/rewind during [ T rack ], the repeat play range changes to [ Folder ]. p When [ Folder ] is selected, it is not possi- ble to play back a subfolder of that folder .
2 Skip the file forward or backward T ouching p skips to the start of the next file. T ouching o once skips to the start of the current file. T ouching again will skip to the previous file. p Y ou can also select a file by pressing o or p button on the hardware.
% T ouch r during playback. Each time you touch r , you move ahead one frame. T o return to normal playback, touch f . p With some discs, images may be unclear during frame-by-frame playback. Slow motion playback This lets you slow down playback speed.
Playing DivX ® VOD content Some DivX VOD (video on demand) content may only be playable a fixed number of times. When you load a disc containing this type of DivX VOD content, the remaining number of plays is shown on-screen and you then have the option of playing the disc (thereby using up one of the remaining plays), or stopping.
2 T ouch [Band] to select a band. T ouch [ Band ] repeatedly until the desired band is displayed, FM1 , FM2 , FM3 or AM . 3 T o perform manual tuning, touch or briefly . The frequencies move up or down step by step. 4 T o perform seek tuning, keep touching or for about one second and re- lease.
Advanced radio operation 1 1 Function display = Refer to step 3 in How to Display each Menu on page 86. Storing the strongest broadcast frequencies “ BSM ” (best stations memor y) lets you auto - .
When Pioneer AV equipment is connected to the navigation system using IP -BUS, such equipment can be operated from the naviga- tion system. When reading this chapter , please also refer to the operation manual of the AV equipment connected to the navigation system.
= Refer to Operation using Function menu ( CD , ROM ) on page 94. p AAC files cannot be played in XDV-P6. p [ Shuffle All ], [ List ]o r[ Detail ], , are not displayed. USB Operating the USB portable audio player/USB memory 3 24 78 56 1 Y ou can control a USB portable audio player/ USB memor y by combining the USB adapter (e.
Switching between the detail information display and the list display Y ou can switch the left side of the basic screen according to your preference. % T ouch [List] (or [Detail]). Each touch of [ List ] (or [ Detail ]) changes the list display or detail information display.
1 Select the repeat range. = For details, refer to Repeating play on the previous page 2 T ouch [Scan] in Function menu. T ouching [ Scan ] switches between [ On ] and [ Off ]. The first 10 seconds of each track of the cur- rent folder (or the first track of each folder) is played.
= Refer to Switching the XM channel select mode on this page. 6 XM channel category or XM channel in- formation 7 Detailed information or preset list dis- play 8 Category icon 1 T ouch [XM] in A V Source screen to se- lect the XM. = For details, refer to Selecting an AV source on page 39.
Storing and recalling br oadcast stations If you touch any of the preset tuning keys Preset1 (or P1 ) — Preset6 (or P6 ) you can ea- sily store up to six broadcast stations for later recall with the touch of a key. 1 Select the channel that you want to store in memory .
Selecting an XM channe l directly Y ou can select an XM channel directly by en- tering the desired channel number . 1 T ouch [Direct]. 2 T ouch 0 — 9 to input the desired chan- nel number . T o cancel the input numbers, touch [ Clear ]. 3 While the input number is displayed, touch [Enter].
Display the Radio ID If you select CH: 000, the Radio ID is dis- played. 1 T ouch [Direct]. 2 Input [000] and then touch [Enter]. If you select another channel, display of the Radio ID is canceled. Display of the Radio ID repeats displaying [ RADIO ID ] and the ID code one af ter the other .
SIRIUS T uner Listening to SIRIUS All CH Mode 3 24 6 5 1 Category Mode 7 Y ou can use the navigation system to control a Pioneer Sirius satellite digital tuner , which is sold separately . F or details concerning operation, refer to the SIRIUS tuner ’ s operation manuals.
Switching the SIRIUS channel select mode Y ou can switch modes between the two meth- ods for selecting and listing channels. All CH Mode : Y ou can select a channel from all channels. Category Mode : Y ou can select a channel within selected cate- gor y .
2 T ouch or to select the de- sired category . p Y ou can also select the categor y by pressing the o or p button. 3 T ouch or to select the de- sired channel within the selected category .
Using the direct traff ic announcement function Y ou can listen to a memorized traffic channel by directly calling it up with the TRFC touch key . Memorize a traffic channel 1 T une in to a T raffic channel. 2 T ouch and hold [TRFC] for two seconds or more.
Switching the alert setting Y ou can enable or disable alerts for all items at the same time. This function is useful when you want to turn alerts off temporarily without changing the condition of each memorized song. 1 T ouch [Memo] in Function menu.
p Since this unit is always on standby to con- nect with your cellular phones via Blue- tooth wireless technology , using this unit without running the engine can result in batter y drainage. 1 Source icon 2 Device name indicator 3 Signal level indicator p If the signal is not available, ( ) is dis- played.
Making a call by entering phone number The most basic way to make a call is to simply dial the number . 1 T ouch [BT -TEL] in A V Source screen to select the cellular phone source. = For details, refer to Selecting an AV source on page 39. 2 T ouch [Direct].
4 T ouch to make a call. p The estimated call time appears in the dis- play . p The estimated call time in the display may differ from the actual call time. 5 T ouch to end the call. Making a call from the preset dial list Y ou can easily store up to 6 phone numbers and later recall them with the touch of a preset key .
4 T ouch to make a call. p The estimated call time appears in the dis- play . p The estimated call time in the display may differ from the actual call time.
Answering call waiting If a call comes in while you are talking on the phone, the number of the new caller appears in the display to signal that you have call wait- ing. Y ou can put the first caller on hold while you answer the call waiting. 1 T ouch to answer call waiting.
— Preset dial list — Call histor y list — Phone book = F or details, refer to Registering your cellular phone on the next page. p If [ Auto Connect ] is set to [ On ], cellular phone that has already been registered is connected automatically . = F or details, refer to Setting the automatic connection on page 123.
2 T ouch [Direct Connect]. The registered phone list is displayed. 3 T ouch a device name you want to con- nect. Connection to the cellular phone starts. When the connection is established, the device name of the connected cellular phone is dis- played.
1 T ouch [Phone Register] in Function menu. The phone register screen appears. 2 T ouch [Delete] on the right-hand side of the device name of the cellular phone you want to delete. The deletion confirmation message appears. 3 T ouch [Y es]. The registered phone is deleted.
Editing the phone book Y ou can edit the phone numbers or names re- gistered in the phone book. 1 T ouch [PH.Book]. The phone book list screen appears. p T ouching or switches to the next or pre- vious page in the list. p Y ou can search the phone book alphabeti- cally .
2 T ouch [Clear] on the right-hand side of the item that you want to clear memory for . On this screen, you can select the following items: Phonebook : Y ou can clear the registered phone book. Dialled Calls : Y ou can clear the dialed call histor y list.
% T ouch [Auto Connect] in Function menu. T ouching [ Auto Connect ] switches between [ On ] and [ Off ]. p Automatic connection is per formed in the registration number order . Echo canceling and noise reduction When you are operating hands-free phoning in the vehicle, you may hear an undesired echo.
: Shuffle 6 Song title, Artist name and Album title indicator Displays the song title, artist name and album title. : Song title : Artist name : Album title 7 Play time bar T ouch panel key operation ( MUSIC ) 1 Connect the iPod to the navigation sys- tem.
T ouch panel key operation ( VIDEO ) This navigation system can play video if an iP od with video capabilities is connected. p Change the video setting on the iPod so that the iP od can output the video to an ex- ternal device, before you display the video screen.
Shuffle play This function shuffles tracks or albums and plays them in random order . % T ouch [Shuffle] in Function menu. Each touch of [ Shuffle ] changes the settings as follows: ! Off — Does not shuffle. ! Songs — Shuffles tracks. ! Albums — Shuffles albums.
p Since there are a number of Bluetooth audio players available on the market, op- erations with your Bluetooth audio player using this navigation system var y greatly in range. Please refer to the instruction man- ual that came with your Bluetooth audio player as well as this manual while operat- ing your player on this navigation system.
Connecting a Bluetooth audio player % T ouch [Connection Open] in Function menu to turn the connection open on. Pairing is displayed. This navigation system is now on standby for connection from Bluetooth audio player .
Operate the external unit by using 1 KEY — 6 KEY The external unit can be operated by transmit- ting the operating commands set to 1 KEY — 6 KEY . p Operation varies depending on the external unit connected. (In some cases, the exter- nal unit may not respond.
V arious settings are available with the audio source according to your audiovisual requests. This chapter describes the methods of chan- ging the various settings and how to set of the LCD panel. Audio Adjustments Introduction to audio adjustments 1 1 Sound display = Refer to step 3 in How to Display each Menu on page 86.
2 T ouch a or b to adjust front/rear speaker balance. Each time you touch a or b moves the front/ rear speaker balance towards the front or the rear . Front:15 to Rear:15 is displayed as the front/ rear speaker balance moves from front to rear . Both Front:0 and Rear:0 are the proper set- ting when only two speakers are used.
Setting a stage that fits your image 1 T ouch [Staging] in Sound menu. 2 T ouch the desired stage setting. p The [ Living Room ] setting that emphasizes midrange sound hardly has any effect near the maximum volume level. p When you set staging other than [ Off ], the high pass filter ( HPF ) setting turns [ Off ].
Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn HPF (high pass filter) on. Only frequencies higher than those in the selected range are output from the front or rear speakers.
= Refer to Language Code Chart for DVD on page 143. p If the selected language is not recorded on the disc, the default language specified on the disc is output and displayed. p Y ou can also switch the subtitle and audio language by touching [ S.Title ]o r[ Audio ] during playback.
3 T ouch [0] — [9] to input a four digit code number . 4 While the input number is displayed, touch [Enter]. The code number is registered, and you can now set the level. 5 T ouch any of [1] — [8] to select the de- sired level. The parental lock level is set.
p The DivX subtitles will be displayed even when the subtitle file setting is on if no cor- responding subtitle files exist. p Up to three lines can be displayed at once. Initial Settings Adjusting initial settings 1 Initial settings lets you perform initial set up of different settings for navigation system.
2 T ouch number key to enter the new PIN code. V ersion of the Bluetooth module System (microprocessor) version PIN code Bluetooth Device (BD) address 3 T ouch [Enter] to fix the new PIN code.
1 Press A V button to switch AV operation screen. 2 Press MENU button and then touch [REAR SCREEN]. Each touch of [ REAR SCREEN ] changes the settings as follows: ! Mirror — The video on the front s.
p Use A V2 Input when connecting CD-RM10 (sold separately) through the external video component. Setting for rear view camera The following two functions are available. The rear view camera feature requires a separately sold rear view camera (e.g. ND-BC2).
2 T ouch desired color . Setting the screen color Y ou can select one of five colors as the screen color . 1 T ouch [Screen Color] in System menu. 2 T ouch desired color .
Operating the Picture Adjustment CAUTION For safety reasons, you cannot use some of these navigation functions while your vehicle is in mo- tion. T o enable these functions, you must stop in a safe place and apply the parking brake (refer to P arking brake interlock on page 20).
Language Code Chart for DVD Language (code), input code Language (code), input code Language (code), input code Japanese (ja), 1001 Guarani (gn), 0714 P ashto, Pushto (ps), 1619 English (en), 0514 Guj.
T roubleshooting If you have problems operating your navigation system, refer to this section. The most common problems are listed below , along with likely causes and solutions. While this list is not comprehen- sive, it should answer your most common problems.
Y ou cann ot position your vehicle on the map or the positioning error is large. Something covers the GPS antenna. Do not cover the GPS antenna with spray paint or vehicle wax, because this may block the reception of GPS signa ls. Snow buildup can also degrade the signals.
A strange sound is heard when the vehicle comes close to a cer- tain place (e.g. Dog barking). The sound for the entry of [ Address Book ] is set. Set the sound setting of that entr y to [ No Sound ]. (P age 64) Slope is not displayed on V ehi- cle Dynamics screen.
No picture. The parking brake lead is not con- nected or applied. Connect a parking brake lead correctly, and apply the parking brake. P arking brake interlock is activated. P ark your vehicle in a safe place and apply the parking brake. (Page 20) [ A V1 Input ]o r[ AV2 Input ] setting is incorrect.
The picture stops (pauses) and the unit cannot be operated. Reading of data has becom e impos- sible during DVD playback. After touching g once, start playback once more. The picture is stretched, the as- pect is incorrect. The aspect setting is incorrect for the display .
Messages and how to react to them The following messages may be displayed by your navigation system. p There are occasions when you may see error messages other than those shown here. In such a case, follow the in- structions given on the display. Message When What to do (See) Please insert the appropriate disc.
System detected that the ver- tical angle of the installation has been changed. Learning status for Gyro Sensor has been initialized. If the mounting angle of the naviga - tion unit has been changed. The system initializes the sensor in order to operate it with the maximum per formance and automatically starts re-learning.
Route calculation was not possible because no guidance can be provided around the destination or the starting point. The destination, way point(s) or starting point are in an area where no road exists (e.g. a mountain) and the route calculation is imposs ible.
This zone is not available on the disc. Please insert an ap- propriate disc. When areas not stored on the DVD Map Disc are included in the search. Set the destination or way point(s) in the countries stored on the DVD Map Disc, or re- place the DVD Map Disc and per form the search again.
• No map data available on this scale. Scaling up. • No map data available on this scale. Scaling down. When the scale that had been pre- viously displayed cannot be dis- played for the following reasons: • The disc was ejected and the sys- tem was changed to the memor y navi mode.
Error Messages When problems occur with AV source playback, an error message appears on the display . Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Ser vice Center .
Anti-theft function Y ou can set a password for the navigation sys- tem. If the back-up lead is cut or RESET button is pressed after the password is set, the navi- gation system prompts for the password next boot up. If the incorrect password is entered, the navi- gation and AV functions cannot be performed.
Installing the Program The program is installed to the navigation sys- tem using the application disc. This is not necessary if your dealer al- ready performed the installation. When installing the program, you carr y out the following operations. When all the setup procedures are completed, you can use the navigation system.
Some time is needed until navigation is ready. 5 Check the details of the caution mes- sage and touch [OK]. 6 T o set the time difference, touch [+] or [-]. Time difference The time difference between the time origin- ally set in the navigation system (P acific Stan- dard Time) and the current location of your vehicle is shown.
2 Press MENU button to change to A V Source screen. 3 Press and hold MENU button for two seconds or more. The 4-point touch panel adjustment screen ap- pears. 4 T ouch and hold the arrows that point to the corners of the LCD screen with the stylus. The red arrow indicates the order .
What is the manual downloaded memory area? Memor y area is the area of the map data that the user voluntarily read into the memor y for the memor y navi mode. Normal guidance is available if the memor y area is stored and you drive within the stored area.
• Demo Mode — • Time 1 • Modify Current Location 1 • Hardware Info s * • Restore Factory Settings 1 *: Product Number in Service Info Screen is not dis- played.
! In some cases, you may not be able to use map display mode during DVD navi mode. If the map display mode is not changed during memor y navi mode, the display will return to the map display mode used dur- ing the DVD navi mode when the DVD Map Disc is set again.
! The navigation guidance will only be avail- able when arriving at your destination. Other guidance is not possible (this in- cludes no display of direction arrows).
How do GPS and dead reckoning work together? F or maximum accuracy, your navigation sys- tem continually compares GPS data with your estimated position as calculated from the data of 3D Hybrid Sensor .
When the positioning by GPS is impossible ! If signals cannot be received from more than two GPS satellites, GPS positioning does not take place. ! In some driving conditions, signals from GPS satellites may not reach your vehicle. In this case, it is impossible for the system to use GPS positioning.
! If there is another road ver y nearby , such as in the case of an elevated freeway . ! If you take a recently opened road that is not on the map. ! If you drive in zig-zags. ! If the road has connected hairpin bends. ! If there is a loop or similar road configura- tion.
! If you enter or exit a multi-storey parking lot or similar structure using a spiral ramp. ! If your vehicle is turned on a turntable or si- milar structure. ! If your vehicle ’ s wheels spin, such as on a gravel road or in snow . ! If you put on chains, or change your tires for ones with a different size.
Some types of vehicles may not output a speed signal while driving at just a few kilo - meters per hour . In such a case, the current lo- cation of your vehicle may not be displayed correctly while in a traffic congestion or in a parking lot.
Route information ! If the set route goes through an area not stored on the disc, no route profile for that area will be displayed. (If the set route tra- verses both an area not stored on the disc and area stored on the disc, only the route profile within the area stored on the disc will be displayed.
! If the heater is used in cold weather , con- densation may form on components inside the DVD drive. Condensation may cause the DVD drive to operate incorrectly .
! Serious scratches can lead to playback pro- blems on this navigation system. In some cases, a DualDisc may become stuck in the disc loading slot and will not eject. T o prevent this, we recommend you refrain from using DualDisc with this navigation system.
! This unit doesn ’ t support the following for- mats: — Windows Media Audio 9 Professional (5.1ch) — Windows Media Audio 9 Lossless — Windows Media Audio 9 Voice AAC additional information ! This unit plays back AAC files encoded by iT unes ® version 4.
! DivX files without video data cannot be re- cognized as DivX file. ! Depending on the file information composi- tion such as the number of audio stream, there may be a slight delay in the start of playback on discs. ! Some special operation may be prohibited because of the composition of DivX files.
! Despite our careful design of the product, small scratches that do not affect actual operation may appear on the disc surface as a result of mechanical wear , ambient conditions for use or handling of the disc. This is not a sign of the malfunction of this product.
! The LCD screen will be difficult to see if it is exposed to direct sunlight. ! When using a cellular phone, keep the an- tenna of the cellular phone away from the LCD screen to prevent disruption of the video by the appearance of spots, colored stripes, etc.
! The system assumes that the driver de- viated either intentionally or inadvertently from the route and searches for another route (intelligent rerouting). Depending on the situation, the system may search for a new route that does not return to the origi- nal one.
— when your vehicle is out of Memor y area — when the vehicle goes out of the area stored in the disc during DVD naviga- tion mode — when the vehicle goes out of the mem- orized area during memo.
Display Information *1: If you touch [ Restore Factory Settings ], the registered POI Shortcuts return to the de- fault or factor y settings. *2: If you touch [ Restore Factory Settings ], the setting value return to the default or fac- tor y settings.
Settings Page V olume *2 80 System Options Language Selection 81, 156 KM / Mile Setting *2 81 Average Speed *2 81 Background Picture Setting 75, 81 Read from Disc 65 Shortcut menu 82 Map Display Optio.
Menu in the A V Screen Sound menu Page FAD/BAL ( Balance ) 131 EQ Menu 132 Staging 132 Loudness 133 Sub Woofer ( Non Fading ) 133 HPF 134 SLA 134 Initial menu Page Rear SP Rear SP 137 Preout 137 PIN Edit 137 Mute Input/Guide 138 5.
CD / ROM Page Repeat 94 Random 95 Scan 95 DivX Page Repeat 96 DVD/DivX Setup 90 RADIO Page BSM 100 Local 100 M-DVD Page Repeat 90 Random 95 Scan 95 USB Page Repeat 103 Random 103 Scan 103 XM Page Memo.
SIRIUS Page Memo 112 Game Alert 113 Game Info 113 BT -TEL Page Phone Connect 119 Phone Register 120 Phonebook T ransfer 121 Phonebook Name View 121 Clear Memory 122 Auto Answer 123 Refuse All Calls 12.
DVD/DivX Setup menu Page Language Subtitle Language 134 Audio Language 134 Menu Language 134 Assist Subtitle 135 Multi Angle 135 TV Aspect 135 Parental 135 DivX VOD 136 Auto Play 136 Subtitle File 136 Glossary 3D Hybrid sensor The built-in sensor which enables the system to estimate your vehicle ’ s position.
Destination A location you choose as the end point of your journey . DivX DivX is a popular media technology created by DivX, Inc. DivX media files contain highly com- pressed video with high visual quality that maintains a relatively small file size.
JPEG This stands for Joint Photographic Experts Group, and is an international still image com- pression standard. Linear PCM (LPCM)/Pulse code modulation This stands for linear pulse code modulation, which is the signal recording system used for music CDs and DVDs.
Route setting The process of determining the ideal route to a specific location; route setting is done auto- matically by the system when you specify a destination. Set route The route marked out by the system to your destination. It is highlighted on the map.
Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 10.8 V to 15.1 V DC) Grounding system ................... N e g a tive type Max. current consumption ........................................... 10.0 A Display unit: Dimensions (W × H × D): DIN Chassis .
HPF : Fr e q u e nc y .......................... 5 0 H z/80 Hz/125 Hz S l o p e .................................... – 12 dB/oct Subwoofer: Fr e q u e nc y .......................... 5 0 H z/80 Hz/125 Hz S l o p e ...................................
PIONEER CORPORA TION 4-1, MEGURO 1-CHOME, MEGURO-KU T OKY O 153-8654, JAP AN PIONEER ELECTRONICS (USA) INC. P .O. Bo x 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.
デバイスPioneer AVIC-N5の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pioneer AVIC-N5をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer AVIC-N5の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer AVIC-N5の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer AVIC-N5で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer AVIC-N5を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer AVIC-N5の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer AVIC-N5に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer AVIC-N5デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
