PioneerメーカーDDJ-WEGO-Wの使用説明書/サービス説明書
ページ先へ移動 of 20
DJ CONTR OLLER DDJ-WEGO Operating Instructions http://pioneerdj.com/support/ The Pi oneer website shown above offers FA Qs, information on so ft ware and various other types of information and se rv ices to allow you to use your product in greater comfort.
2 En Contents How to read this manual In this manual, names of screens and menus displayed on the computer screen, as well as names of buttons and terminals on the product, etc., are indicated within brackets. (e.g.: [ RECORD ] panel, [ CONFIG ] menu, [ CUE ] button, [ VINYL ] mode, [ AUX IN ] terminals) Before start Features .
3 En Before start Before start Features This unit is a DJ controller in a compact size enabling DJ performances with dynamic sound and a variety of light effects.
4 En Before you start Installing the software About the driver software (Windows) This driver software is an exclusive ASIO driver for outputting audio signals from the computer.
5 En Before you start Checking the version of the driver software Click the Windows [Start] menu>[All Programs]> [Pioneer]>[DDJ_WeGO]>[DDJ_WeGO Version Display Utility].
6 En DDJ-WeGO 5 Select the type of installation for VIRTUAL DJ LE, then click [Next]. — When [ Typical ] is selected, plug-ins and other components are installed simultaneously. Normally select [ Typical ]. — When [ Custom ] is selected, you can select which components to install.
7 En Connections Connections Be sure the power is off when connecting equipment and changing connections. Be sure to use the USB cable included with this product. Refer to the operating instructions for the component to be connected. With this unit, the power is supplied by USB bus power.
8 En Part names and functions 1 Browser 1 Browse rA B 3 Mixer 3 Mixer 2 Deck 2 Deck 2 Deck 2 Deck 3 Mixer 3 Mixer p 1 2 2 d k c 4 3 h h f 9 a b 8 6 5 d 6 5 l g i c 4 3 f j g m m q n o 7 7 9 a b 8 e 1 Browser 1 Rotary selector ! Turn: The cursor moves in section A of the above diagram.
9 En Part names and functions 2 Deck 3 f button Use this to play/pause tracks. 4 CUE button ! Press: Sets a cue point or moves the cue point. ! [ SHIFT ] + press: The playing position moves to the beginning of the track. 5 SYNC (MASTER) button ! Press: Synchronizes to the master deck’s tempo.
10 En Basic Operation Starting the system Starting this unit 1 Connect this unit to your computer via a USB cable. ON OFF PHONES USB 2 Boot up the connected computer. 3 Slide this unit’s [ON/OFF] switch to the [ON] position. ON OFF PHONES Turn on the power of this unit.
11 En Basic Operation D D B A B CC Loading tracks and playing them ( r A) 1 Turn the rotary selector while pressing the [SHIFT] button to select a folder or item. ! When a folder or item with the [+] mark is selected and the rotary selector is pressed while pressing the [ SHIFT ] button, that folder or item is opened or closed.
12 En Operation (this unit’s features) F E E JOG FX mode types ( r E) 2 3 4 5 1 This unit is equipped with 5 types of JOG FX modes. The JOG FX mode types are shown below. Mode Description of mode 1 Key control Key control is turned on and off by pressing the [ CTRL A ] button.
13 En Operation (this unit’s features) Adjusting the color freely Turn the [EQ (HI, MID, LOW)] controls while pressing the [SHIFT] button to change the color of the illumination of the jog dial. The colors of the illumination and the corresponding [ EQ ( HI , MID , LOW )] controls are shown below.
14 En Advanced Operation H H J J I G G I Using the CUE function ( r G) 1 In the pause mode, press the [CUE] button to set a cue point at the position at which playback is paused. — When no hot cue is set at any of buttons [ 1 ] to [ 4 ], the cue point is simultaneously set as hot cue [ 1 ].
15 En Advanced Operation Making the SAMPLER settings The [ SAMPLER ] volume and other settings can be adjusted through operations on the computer. 1 Click [ ] on the computer’s screen to switch to the [SAMPLER ]screen. 2 Operate the function on the computer’s screen.
16 En Operation (other functions) Analyzing files ! This function is operated on the computer. It cannot be operated on this unit. We recommend analyzing files before playing them with VIRTUAL DJ LE. When files are analyzed, the track’s BPM and key are detected and the beat grid is attributed automatically.
17 En Operation (other functions) Adjusting the jog dial’s MIDI message sending interval This unit is equipped with a mode for adjusting the jog dial’s MIDI mes - sage sending interval.
18 En Additional information Troubleshooting ! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
19 En Additional information Using as a controller for other DJ software This unit also outputs the operating data for the buttons and dials in MIDI format. If you connect a computer with a built-in MIDI-compatible DJ soft - ware via a USB cable, you can operate the DJ software on this unit.
20 En About trademarks and registered trademarks ! Pioneer is a registered trademark of PIONEER CORPORATION. ! Microsoft ® , Windows Vista ® , Windows ® and Internet Explorer ® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
デバイスPioneer DDJ-WEGO-Wの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pioneer DDJ-WEGO-Wをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer DDJ-WEGO-Wの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer DDJ-WEGO-Wの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer DDJ-WEGO-Wで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer DDJ-WEGO-Wを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer DDJ-WEGO-Wの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer DDJ-WEGO-Wに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer DDJ-WEGO-Wデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。