PioneerメーカーPD-F1009の使用説明書/サービス説明書
ページ先へ移動 of 20
Operating Instructions FILE-TYPE COMPACT DISC PLAYER PD-F1009.
2 W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT NOTICE The serial number for this equipment is located on the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area.
3 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING CONTENTS BEFORE YOU USE THE PLAYER ....................................... 4 CAUTIONS REGARDING HANDLING ................................. 5 CONNECTIONS ...........................................
4 BEFORE YOU USE THE PLA YER HERE’S WHAT YOU CAN DO! 301 CD giga changer for the compact 16 inch width The new roulette-type mechanism allows for a capacity of 301 CDs. One-disc jump-in playback thanks to a single loader slot The PD-F1009 is equipped with a single loader that lets you easily play a disc that is not loaded in the rack.
5 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING Playing CD-R and CD-RW discs in this CD changer • This unit can play CD-R and CD-RW discs. However , it may not be possible to play unfinalized discs* which have very little recording time left on them.
6 CONNECTIONS LINE OUT OPTICAL CONTROL DIGITAL OUT L R IN OUT R L C D CONTROL OUT DIGIT AL OPTICAL IN LINE OUT OPTICAL CONTROL DIGIT AL OUT L R IN OUT L R L R Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
7 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING NAMES OF P ARTS DISC TRACK MIN SEC SINGLE ALL RDM RPT 1 CD TEXT CUSTOM PGM PREVIOUS DISC SCAN BEST Lights when a CD TEXT is being played. Lights when the BEST button is pressed. Blinks during DISC SCAN or TRACK SCAN.
8 REMOTE CONTROL UNIT When operating the remote control unit, point the unit's infrared signal transmitter at the remote control receiver (Remote Sensor) on the front panel of the player . The remote control unit can be used within a range of about 7 meters (23 feet) from the remote sensor , and within angles of up to about 30 degrees.
9 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING • While changing or inserting discs, be careful not to press any buttons on the main unit or the remote control. The rack may move suddenly , and then your fingers may be caught between discs and the side of door .
10 To select a play mode Press MODE during play or stop mode. Press a few times to choose the mode you desire. Playback occurs according to the chosen mode. ALL : All discs are played back. SINGLE : One disc is played back. CUSTOM : Only discs stored in the CUSTOM file are played back (see pages 12 to create a custom file).
11 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING MODE DISC PUSH ENTER RANDOM STANDBY ACCESS PLAY OPEN/ CLOSE UNLOAD STANDBY/ON SINGLE LOADER FILE–TYPE CD MECHANISM Î CLEAR PROGRAM REPEAT DIS.
12 5 1 ¡ 4 ¢ RANDOM DISC DISC 0 TRACK 7 8 9 4 5 6 1 2 3 DISPLAY MODE CLEAR PROGRAM REPEAT 7 8 3 – + 0 7 8 9 4 5 6 1 2 3 To program and play only the discs you want to hear (CUSTOM play) This unit lets you program up to 300 of your favorite discs.
13 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING V ARIOUS OPERA TIONS 1 ¡ 4 ¢ DISC DISC 0 TRACK 7 8 9 4 5 6 1 2 3 DISPLAY HI-LITE BEST PREVIOUS MODE CLEAR PROGRAM REPEAT – + REPEAT MODE DIS.
14 To playback tracks/discs at random (RANDOM play) RANDOM selects tracks at random from the disc(s) in the current play mode and plays each track once. The selected play mode stops after its contents are played back. (Refer to chart below .) Press RANDOM during either play or stop mode.
15 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING To program tracks/discs in a desired order (PROGRAM play) • The remote control is the most convenient way to perform these operations. • Y ou can program up to 36 steps. • The same operation is possible by pressing the button indicated between parentheses.
16 V ARIOUS OPERA TIONS This indicates the number of programmed steps. 1 ¡ 4 ¢ RANDOM DISC DISC 0 TRACK 7 8 9 4 5 6 1 2 3 DISPLAY HI-LITE BEST PREVIOUS MODE CLEAR PROGRAM REPEAT 7 8 3 – + To scan quickly through tracks on a disc (HI-LITE scan) • The operation is available only from the remote control unit.
17 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING = To use the DISPLAY button Press DISPLA Y during playback. Each time you press DISPLA Y , the display changes as follows.
18 DISC TRACK MIN SEC TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
19 VARIOUS OPERATIONS BASIC OPERATIONS BEFORE OPERATING SPECIFICA TIONS 4. Accessories • Remote control unit ................................................................... 1 • Size AA/R6P dry cell batteries ...................................
Printed in Japan <PRB1300-A> Published by Pioneer Corporation. Copyright © 1999 Pioneer Corporation. All rights reserved. <99K00ZF0S00> PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS [USA] INC.
デバイスPioneer PD-F1009の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pioneer PD-F1009をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer PD-F1009の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer PD-F1009の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer PD-F1009で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer PD-F1009を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer PD-F1009の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer PD-F1009に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer PD-F1009デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。