PioneerメーカーRemix stationの使用説明書/サービス説明書
ページ先へ移動 of 28
REMIX S TA TION RMX-1000 Operating Instructions http://pioneerdj.com/support/ The Pi oneer website shown above offers FA Qs, information on so ft ware and various other types of information and se rv ices to allow you to use your product in greater comfort.
2 En Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
3 En Information to User Alterations or modifications carried out without appropriate authorization may invalidate the user ’s right to operate the equipment.
4 En The Safety of Y our Ears is in Y our Hands Get the most out of your equipment by playing it at a safe level – a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly , without affecting your sensitive hearing.
5 En Contents How to read this manual The names of displays, menus, and buttons in this manual are enclosed in brackets. (e.g. [ MASTER ] channel, [ ON / OFF ], [File] menu) Quick Start Guide Features ..................................................
6 En Quick Start Guide Features This unit is a remixing station for DJs consisting of four effect sections. It allows tracks to be arranged in real time with intuitive operation.
7 En Quick Start Guide Connecting the input/output terminals Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Connect the power cord after all the connections between devices have been completed.
8 En To connect to the DJ mixer’s [ MASTER OUT ] terminals R L R L To MASTER OUT terminal DJ player DJ player DJ Mixer Power amplifier and speakers To audio input terminals 1 2 3 4 7 5 6 1 Cord hook Hook the AC adapters’ power cord here.
9 En Quick Start Guide Preparations for using the effects 1 Slide the [ON, STANDBY] switch on the rear panel of this unit to the [ON] position. 2 Check that the [INPUT] and [X-PAD] buttons are lit. ! If the [ INPUT ] and [ X-PAD ] buttons are not lit, press the buttons to light them.
10 En Operation 2 1 8 6 3 74 5 5 1 1 Adjusting the input and output levels (page 11) 2 Making the BPM and QUANTIZE settings (page 11) 3 SCENE FX section (page 12) 4 ISOLATE FX section (page 13) 5 X-PA.
11 En Operation Adjusting the input and output levels 2 4 3 5 1 1 INPUT LEVEL control This adjusts the audio level input to this unit. 2 INPUT level indicator This displays the audio level input to this unit. 3 OUTPUT LEVEL control This adjusts the audio level output from this unit.
12 En Using the NUDGE function The [ NUDGE (+, –) ] button can be used to fine-adjust the cycle and tim - ing of the sound output from the X-PAD FX section. Press the [+] or [–] side of the [NUDGE (+, –)] button. — [+]: The cycle and timing of the sound output from the X-PAD FX section are advanced.
13 En Operation — The strength of the effect decreases as the control is turned counterclockwise from the center. The strength of the effect is minimum when the control is turned fully counterclockwise. 4 Turn the [SUB PARAMETER 2] control. This adjusts the strength of the selected effect’s sub parameter 2.
14 En Using the X-PAD FX function 1 Press one of the [X-PAD FX] buttons. One of this unit’s internal sound sources or one of the sampled sound sources loaded from SD memory cards is selected and output. When a button is pressed, the sound is produced immediately.
15 En Operation RELEASE FX section 1 2 3 1 RELEASE FX selector switch This switches the type of RELEASE FX effect. 2 RELEASE FX lever Use this to adjust the RELEASE FX effect. 3 RELEASE FX indicator This lights when the effect is turned on. It lights according to the position of the [ RELEASE FX ] lever.
16 En Types of effects Types of SCENE FX effects BPF ECHO This function superimposes the input sound that has passed through the band pass filter onto the original input sound and passes this through the echo circuit before outputting the sound.
17 En Types of effects Frequency SCENE FX control Sets the cutoff frequency of the low pass filter. SUB PARAMETER 1 control Sets the echo sound’s delay time.
18 En TRANS/ROLL TRANS : When turned counterclockwise This function cuts the input sound according to the multiplying factor of the beat set at the position of the control. LOW control Adjusts the amount by which the low frequency sound is cut. MID control Adjusts the amount by which the mid frequency sound is cut.
19 En Using the included software Software end user license agreement This Software End User License Agreement (“Agreement”) is between you (both the individual installing the Program and any single legal entity for which the individual is acting) (“You” or “Your”) and PIONEER CORPORATION (“Pioneer”).
Using remixbox When the remixbox application installed on a computer is used, the set - tings of the parameters of this unit’s effects can be customized to your liking. The remixbox can also be used to load sampled sound sources into the X-PAD FX section.
21 En Using the included software Launching remixbox/Viewing the Operating Instructions Log on as the user which was set as the computer’s administrator before using remixbox. The operating instructions can be viewed by launching remixbox then clicking [ Manual ] from the remixbox [ Help ] menu.
Changing this unit’s settings Changing the MIDI settings The following buttons are used to change the MIDI settings: — [ TAP ] button: Used as the Enter button. — [ AUTO ] button: Used as the Cancel button. — [ NUDGE (+, –) ] button: Used to select items.
23 En MIDI assignment map ! “CC” is the abbreviation of “control change”. A control change is a type of MIDI signal used to transmit various types of control information, such as timbre, volume, etc. ! “Note” is a MIDI term used when pressing or releasing notes on a piano or other keyboard.
Category SW Name SW Type MIDI Messages MIDI button type Trigger/Toggle Notes Plug-in control OVERDUB (DELETE) button + ROLL button BTN Note 035 Trigger only OFF=0, ON=127 OVERDUB (DELETE) button + KIC.
25 En Additional information Troubleshooting ! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
Block Diagram About trademarks and registered trademarks ! Pioneer is a registered trademark of PIONEER CORPORATION. ! Microsoft ® , Windows Vista ® , Windows ® and Internet Explorer ® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
27 En Additional information UCP0212 PIONEER ELECTRONICS (USA) IN C. LIMITED W ARRANTY W ARRANTY V ALID ONL Y IN THE U. S. A. AND CANADA W ARRANTY Pioneer Electronics (USA) Inc.
<DRB1586-A> To register your product, find the nearest authorized se rv ice location , to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs :.
デバイスPioneer Remix stationの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pioneer Remix stationをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer Remix stationの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer Remix stationの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer Remix stationで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer Remix stationを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer Remix stationの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer Remix stationに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer Remix stationデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。