PioneerメーカーRS-P90の使用説明書/サービス説明書
ページ先へ移動 of 64
Optical Digital Reference System Universal Digital Preamp/equalizer Owner’ s Manual RS-P90 Optical Digital Reference System Universal Digital Preamp Owner’ s Manual RS-P90 English ENG/MASTER COVER.
2 Contents Key Finder .................................................... 4 Head unit (RS-D7R — ) ...................................... 4 Remote control (RS-D7R — ) .............................. 4 Opening and closing the remote control cover ..
Contents 3 Audio Adjustment <Network> .............. 30 What is the multi-amp system? ...................... 30 Network menu ................................................ 31 - Switching to the network menu Time alignment adjustment ..........
4 K ey F inder Head unit (RS-D7R — ) This unit can be operated with the combined head unit RS-D7R — (sold separately). Remote control (RS-D7R — ) Most of all functions can be operated by the remote control. Opening the cover enables the SHIFT, RETURN and FUNCTION buttons 1 to 6 inside the remote control.
Opening and closing the remote control cover When the remote control is opening the cover enables the SHIFT, RETURN and FUNC- TION buttons 1 to 6 inside the unit. Menu displays with cover open and closed in this system, the available functions and the menu display vary depending on the condition of the remote control in use.
6 K ey F inder When the cover is closed Closing the cover of the remote control makes the menu display to the closed state. Menu display in closed state Example: Main menu screen Note: • Menu display in closed state: Current mode and functions which are ON are displayed.
Before Using This Product Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
8 Before Using This Product About this manual This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory.
About the digital network A vehicle, unlike the home audio, imposes several constraints upon the quality of repro- duced sound, and have the following effects: • Reflected sounds have strong effects on direct sounds because of the confined space and complex shape within a vehicle.
10 Before Using This Product Resetting the microprocessor The microprocessor must be reset under the following conditions: • When using this unit for the first time after installation. • When the machine fails to operate properly. • When strange (incorrect) messages appear on the display.
A udio Adjustment Audio menu This system has the following three audio menus: Main <Main> (page 12) This carries out balance adjustments as well as bass/treble adjustment, the basis for sound quality adjustments.
12 A udio Adjustment <Main> Main menu With this menu, you can make the following adjustments. • Balance adjustment <FAD/BAL CONTROL> (Closed state) • Bass/treble adjustment <B/T>.
Bass/treble adjustment <B/T> (Open state) It is possible to select one from a choice of four frequencies to becomes the reference when adjusting the bass/treble tone. The frequencies and level adjustment ranges from which selections may be made are as follows: Bass : 63 Hz, 100 Hz, 160 Hz, 250 Hz Treble: 4 kHz, 6.
14 A udio Adjustment <Main> Using the compression <CP> (Open state) You can reduce the difference between the volume levels of loud and quiet sounds. The compression function suppresses loud sounds and boosts quiet sounds to reduce the difference between the volume levels of loud and quiet sounds.
Adjusting the listening position <PS> (Open state) One way to assure a more natural sound is to clearly position the stereo sound image (putting you in the center of the sound field).
16 A udio Adjustment <Main> Fine tuning the position You can finely adjust the differences in distance and sound levels for the position selected with the position selector function. Make adjustments using both methods to match the location of the speakers and the shape of your vehicle until you achieve more natural sound imaging.
Points concerning fine tuning • While listening to vocals, adjust the distance to position the vocal sound image naturally to the front. 5. After tuning has been completed, press the RETURN button to cancel the position fine tuning screen. The values are stored in memory and the display returns to position selector screen.
18 A udio Adjustment <Main> Effective distance adjustment using the position fine tuning function — Relation to time alignment adjustment function — The distance between the listening position and each speaker can be tuned using either of two methods.
Source level adjustment <SLA> (Open state) The SLA (source level adjustment) function prevents radical leaps in volume level when switching between sources. Settings are based on the FM volume level, which remains unchanged. Note: • Since the FM volume is the control, SLA is not possible in the FM modes.
20 A udio Adjustment <Equalizer> About the equalizer menu One important factor for creating quality sound is the correction of disturbances in fre- quency characteristics within the complex shape of a vehicle interior.
Equalizer menu With this menu, you can make the following adjustments. • Recalling the equalizer curve (Closed state) (Refer to page 45.) • Adjusting the 31 band graphic equalizer <FINE> (Op.
22 A udio Adjustment <Equalizer> Relation between frequency characteristics and sound quality Sound quality generally has the following characteristics, depending on the frequency.
The points when adjusting the equalizer curve • Take the recreated frequency bands of the speakers into consideration when adjusting. For example, when a speaker with a band between 80 Hz and 4 kHz is connected, adjusting the level in 50 Hz or 10 kHz will have no effect.
24 A udio Adjustment <Equalizer> Adjusting the 31 band graphic equalizer <FINE> (Open state) Adjustable frequency : 20 Hz to 20 kHz (Every 1/3 octaves, total 31 bands) Level adjustment range: –12 dB to +12 dB (0.5 dB/1 step) • You can switch between the left/right combine mode and left/right independent mode at any time.
Adjusting the 3 band parametric equalizer <FINE> (Open state) About the adjustment using the parametric equalizer The parametric equalizer can make the following adjustments. Separate 3 band adjustment for left/right It is possible to set up the left and right equalizer curves separately.
26 A udio Adjustment <Equalizer> Setting the equalizer curve • You can switch between the left/right combine mode and left/right independent mode at any time. So even when using the left/right independent mode, you can switch to the left/right combine mode to perform adjustments.
A convenient way to set up equalizer curves • Store in the base memory, an equalizer curve, set in such a manner that the sound field in the car becomes flat, and adjusted to the frequency characteristics unique to your car. (It is recommended that adjustments be made after the dealer has taken measurements.
28 A udio Adjustment <Equalizer> The flat function <FL T> (Open state) — Common to 31B-GEQ and 3B-PEQ — The adjusted equalizer curve can be temporarily returned to its prior status before making the adjustment (all levels are 0 dB), using the flat function.
The clear function <CLR> (Open state) — Common to 31B-GEQ and 3B-PEQ — The clear function lets you clear the equalizer curve currently being adjusted to return it to its initial status (when all levels are 0 dB). This is convenient when you want to readjust an equalizer curve.
30 A udio Adjustment <Network> What is the multi-amp system? The multi-speaker system reproduces each frequency band (high, mid, low and ultrabass- ranges) through its own exclusive speaker unit. The multi-amp system provides an exclusive power amplifier for each speaker unit.
Network menu <N.W .> With this menu, you can make the following adjustments. • Time alignment adjustment <T.A.> (Open state) • Filter adjustment <FTR> (Open state) • Switching .
32 T ime alignment adjustment <T .A.> (Open state) In the vehicle, the different speaker units are at widely differing distances from the listener.
Example: making corrections for the driver’s seat in a left-hand drive vehicle • Measure the distance between the head of the listener, when sitting in the driver’s seat, and each speaker unit. Note: • The unit of distance must be centimeters.
34 A udio Adjustment <Network> Inputting the distance to be corrected (Delay T ime) Scope of adjustment: 0 cm to 192.5 cm (0.77 cm/1 step) (S.W.: 0 cm to 385 cm (1.54 cm/1 step)) Note: • The correct distance can not be input unless these operations are conducted.
Note: • Some systems may indicate values for speaker units which are not connected. Verify the composi- tion of the system in order to correctly adjust the bands for the connected speaker units. 7. Carry out time alignment adjustments for the other speaker units.
36 A udio Adjustment <Network> Filter adjustment <FTR> (Open state) The following adjustments can be made during filter adjustments. Make the appropriate adjustments for the reproduced frequency band and characteristics of the connected speaker unit.
About the H.P.F. and L.P.F. High pass filter eliminates lower sound ranges (low-range) from the set up frequencies and allows high ranges through. Low pass filter eliminates upper sound ranges (high-range) from the set up frequencies and allows low ranges through.
38 A udio Adjustment <Network> Adjusting the filter First, determine the approximate band to be used, taking into consideration the reproduced frequency band and the characteristics of the connected speaker. 7. Set up the cut-off frequencies of each filter for all the bands.
Important points in adjusting cut-off frequencies • If the subwoofer is installed in the rear tray, setting a high cut-off frequency of L.P.F. of the subwoofer separates the bass and gives the listener the feeling that the bass is coming from behind.
40 A udio Adjustment <Network> Important points in adjusting the slope • A decrease in the absolute value of the slope (more gentle inclination) makes the frequency characteristics more susceptible to interference from the next band.
Switching between linear phase characteristics/minimum delay phase characteristics <LIN> (Open state) This product (RS-P90) uses an FIR (finite-duration impulse response) digital filter. You can select between the filter characteristics of linear phase characteristics and minimum delay phase characteristics.
42 A udio Adjustment <Memory Functions> Memory functions of adjusted audio menu (MEMO) This system allows the contents of the adjusted equalizer and network to be stored in mem- ory as follows. The numbers in ( ) represent the numbers of the memory registers to be used.
Switching to memory mode Memory operations are conducted in the memory mode of each audio menu. Equalizer menu Note: • This operation cannot be conducted when the flat function of the equalizer menu is ON. Network menu Note: • This operation cannot be conducted when the screen shows filter adjustment screen or time alignment adjustment screen.
44 A udio Adjustment <Memory Functions> Storing the adjustment data in memory Note: • When the adjustment data have been stored, the previous data are eliminated and replaced by the new.
Recalling data stored in memory There are two ways to recall data stored in memory. In forward/reverse order — Functions of equalizer menu — This function can be operated when the cover of the remote control is closed.
46 A udio Adjustment <Memory Functions> Specifying the memory number directly Memory recall operations on the equalizer menu • When the flat function is turned ON, it is not possible to recall memory. 2. Press the FUNCTION button to recall the memory.
Memory protect function In order to avoid accidentally erasing data which have been stored in memory, or to avoid replacing stored data, it is possible to set up a protect function for the following memory numbers. When the protect function is ON, adjustment data storage operations are not accepted.
48 Display for the P erson who Set Up the A udio Adjustments Inputting the name Inputting the name of the person who set up the memory (equalizer and network) of the Audio menu, or messages, stores them in the RS-D7R — ’s head unit’s memory. The RS-D7R — head unit is sold separately.
Note: • You can select to input numbers and symbols by pressing FUNCTION button 2. Continued overleaf. 6. Move the box left and right with the 2 / 3 buttons. To insert a space, skip the box with the 3 button. 5. Select letters, numbers and sym- bols with the 5 / ∞ buttons.
50 Display for the P erson who Set Up the A udio Adjustments When removing the car battery • The separately sold head unit (RS-D7R — ) stores the name of the person who set up the audio in memory. Removing the car battery clears the memory. 9. The contents stored in memory are indicated on the display.
Memory Data Memo • When using the left/right combine mode, record in the “Left (Lch)” column. • With the 3-band parametric equalizer, input the appropriate frequency. Frequency 20 Hz 25 Hz 31.5 Hz 40 Hz 50 Hz 63 Hz 80 Hz 100 Hz 125 Hz 160 Hz 200 Hz 250 Hz 315 Hz 400 Hz 500 Hz 630 Hz 800 Hz 1 kHz 1.
52 Memory Data Memo • When using the left/right combine mode, record in the “Left (Lch)” column. Network: Filter characteristics B1 B2 L.P .F . H.P .F . Frequency Phase Slope L.P .F . H.P .F . LEFT RIGHT M1 M2 L.P .F . H.P .F . L.P .F . H.P .F .
Memory Data Memo 53 ENG/MASTER 96 53 Network: T ime alignment B1 S.W . LO W MID HIGH B2 S.W . LO W MID HIGH M1 S.W . LO W MID HIGH M2 S.W . LO W MID HIGH M3 S.
54 Connecting the Units WARNING • For traffic safety and to maintain safe driving conditions, keep the volume low enough so that you can still hear normal traffic sound. • Check the connections of the power supply and speakers if the fuse of the battery wire or the amplifier fuse blows.
Connecting the Units 55 ENG/MASTER 96 55 Setting example RCA Input Amplifier RS-P90 RS-D7R — (sold separately) Front W oofer Subwoofer Multi-CD player (sold separately) Front Mid-range Front T weeter Optical cable IP-BUS cable Routing the optical cable Note: • Try not to bend the optical cable sharply.
56 Connecting the Units Connection diagram Optical input (blue) IP-BUS input (blue) IP-BUS cable (supplied) optical cable (supplied) RS-D7R — T o IP-BUS output (black) T o optical output (black) Fuse (4A) Fuse holder (4A) Power terminal Refer to “ Connecting the power terminal ” on page 58.
Connecting the RCA input amplifier T weeter Mid range W oofer Subwoofer White White Red Red Power amplifier Power amplifier Power amplifier Power amplifier For system remote control Blue/white Blue/wh.
58 Connecting the Units Connecting the power terminal 1. Put the short-circuit protection cover around the blue/white, clear/red and clear/black lead. Be sure to use this cover to prevent short-circuit. 2. Connecting the leads. Securely fasten the leads with terminal screws.
Secure the optical cable 2. Route the optical cable through the cable clamp. Attach the cable clamp into the hole. 1. Attach the cable clamp. When plugging the optical cable into the unit, use the supplied cable clamp to prevent the cables from being bent sharply.
60 Note: • Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunction.
T roubleshooting When an error occurs, locate the cause according to the list below. In most cases, the prob- lem is incorrect connections or settings. 1. Double check the connections and settings using the checklist. 2. If connections and settings are correct, press the RESET button.
62 Specifications GENERAL Power Source .......... DC 14.4 V (10.8 to 15.1 V allowable) Grounding system .......................................... Negative type Max. Current consumption ............................................ 1 A Fuse ...........
Specifications 63 CRD3207 ENG/MASTER 96 63.
ENG/MASTER COVER 98 64 Published by Pioneer Corporation. Copyright © 2006 by Pioneer Corporation. All rights reserved. Publication de Pioneer Corporation. Copyright © 2006 Pioneer Corporation. Tous droits de reproduction et de traduction réservés.
デバイスPioneer RS-P90の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pioneer RS-P90をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer RS-P90の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer RS-P90の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer RS-P90で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer RS-P90を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer RS-P90の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer RS-P90に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer RS-P90デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
