PioneerメーカーSC-35の使用説明書/サービス説明書
ページ先へ移動 of 148
Operating Instructions audio/video multi-channel receiv er SC- 37 SC- 35 SC-37_35_UXJ CB.book 1 ページ 2010 年3月9日 火曜日 午前9時32分.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser vicing) instructions in the literature accompanying the appliance.
VENTILA TION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 20 cm at top, 10 cm at rear , and 20 cm at each side). W ARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating.
This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period.
5 En Contents 01 Before you start Ou r p hiloso p hy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Featu r es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Checking what’s in the box . . . . . . . . . . . .
6 En Listening to XM Radio . . . . . . . . . . . . . . . . . . . . . . . . . 53 Using XM HD Su rr ound . . . . . . . . . . . . . . . . . . . . . . 54 Saving channel pr esets . . . . . . . . . . . . . . . . . . . . . . 54 Using the XM Menu . . . . . . .
7 En 10 Controlling the rest of your system (In case of SC-35) About the Remote Setu p menu . . . . . . . . . . . . . . . . . 96 O p e r ating multi p le r eceive r s . . . . . . . . . . . . . . . . . . . 96 Setting the r emote to cont r ol othe r com p onen ts .
8 En Flow of settings on the receiver The unit is a full-fledged AV r eceive r equi pp ed with an abundance o f functions and te r m inals. It ca n be used easil y afte r following the pr ocedu r e below to ma ke the connect ions and settin gs.
Before you start 01 9 En Chapter 1: Before you start Our philosophy Pionee r is dedicated to making you r home theate r listening ex p e r ience as close as p ossible to the vision of the moviemake r s and maste r in g enginee r when th ey c r eated the o r iginal soundt r ack.
Before you start 01 10 En Checking what’s in the box Please check that you’ve r eceived the follow ing su pp lied accesso r ies: In case of SC-37 •S e t u p mic r o p hone (cable: 5 m (16.
Before you start 01 11 En Operating range of remote control unit The r emote cont r ol may not wo r k pr o p e r ly i f: •T h e r e a r e obstacles between the r emote cont r ol and the r eceive r ’s r emote senso r . •D i r ect sunlight o r fluo r escent light is shining o nto the r emote senso r .
Controls and displays 02 12 En Chapter 2: Controls and displays Remote control (In case of SC-37) This section ex p lains how to o p e r ate the r emote cont r ol fo r the r eceive r .
Controls and displays 02 13 En 10 Receiver Contro l buttons Set the r emote co nt r ol o p e r ation selecto r switch to RECEIVER fi r st to access: STATUS – P r ess to check selected r eceive r settings ( p age 81). PHASE CTRL – P r ess to switch on/off Phase Cont r ol o r Full Band Phase Cont r ol ( p age 63).
Controls and displays 02 14 En (Gray box wi th black lett ers): Two-wa y communications are established and the r eceiver’s power is off. (White letters only): Two-way communications are not working well. In this ca se, the area indicating the receiver’s status ( 12 ) is n ot displayed.
Controls and displays 02 15 En Remote control (In case of SC-35) This sectio n ex p lains how to o p e r ate the r emote cont r ol fo r the r eceive r .
Controls and displays 02 16 En HDMI OUT – Swit ch the HDMI out p ut te r minal ( p age 81). SIGNAL SEL – Use to s elect an in p ut sign al ( p age 62). MCACC – P r ess to switch between MCACC pr esets ( p age 62). SLEEP – Use to p ut the r eceive r in slee p mode and select the amount of ti me befo r e slee p ( p age 81).
Controls and displays 02 17 En STREAM DIRECT – Lights when Di r ect/Pu r e Di r ect is selected ( p age 62). ADV.SURROUND – Lights when one of the Advanced Su rr ound modes has been selected ( p age 61). STEREO – Lights when ste r eo listening is swi tched on ( p age 61).
Controls and displays 02 18 En Front panel 1 STANDBY/ON Switches the r eceive r between on and standby. 2 INPUT SELECTOR dial Use to select an in p ut func tion. 3 Indicators ADVANCED MCACC – Lights when EQ is set to ON in the AUDIO PARAMETER menu ( p age 76) .
Controls and displays 02 19 En 11 TUNER EDIT Use with /// / ENTER to mem o r ize and name stations fo r r eca ll ( p age 52). 12 BAND Switches between AM and FM r adio bands ( p a ge 52).
Connecting your equipment 03 20 En Chapter 3: Connecting your equipment This r eceive r pr ovides you with many c onnection p ossibilities, but it doesn’t ha ve to be diffic ult. This c ha p te r ex p lain s the kinds of com p onents you can connect to m ake u p you r home thea te r system.
Connecting your equipment 03 21 En Note •T h e i n p ut functions below a r e assigned by default to the r eceive r ’s diffe r ent in p ut te r minal s. Refe r to The Input Setup menu on p age 45 to change the assignments if othe r connections a r e used.
Connecting your equipment 03 22 En Determining the speakers’ application This unit p e r mits you to build va r ious su rr ound systems, in acco r dance with the num be r of s p eake r s you have. •B e s u r e to connect s p eake r s to the f r ont left and r ight channels ( L and R ).
Connecting your equipment 03 23 En [E] 5.1 channel surround sy stem & ZONE 2 connection (Multi Zone) • Speaker System setting: ZONE 2 With these connections you c an simultaneously enjo y 5.1-channel su rr ound sound in the main zone with ste r eo p layback on anothe r com p onent in ZONE 2.
Connecting your equipment 03 24 En • Place the cente r s p eake r above o r below the TV so that the sound of the cente r channel is loc alized at the TV sc r een. Also, make su r e the cente r s p eake r does not c r oss the line fo r med by the leading ed ge of the f r ont left and r ight s p eake r s.
Connecting your equipment 03 25 En Installing your speaker system At the ve r y least, f r ont left and r ight s p eake r s only a r e necessa r y . N o t e t h a t y o u r main su rr oun d s p eake r.
Connecting your equipment 03 26 En Bi-amping y our speakers Bi-am p ing is when you connect the high f r equency d r ive r and low f r equency d r ive r of yo u r s p eake r s to di ffe r ent am p lifie r s fo r bette r c r ossove r p e r fo r mance.
Connecting your equipment 03 27 En Selecting the Speaker system The f r ont height te r minals can be used fo r f r ont wide and S p eake r B connections, in addition to fo r the f r ont height s p eake r s.
Connecting your equipment 03 28 En If seve r al video com p onents a r e assigned to the same in p ut function (see The Input Setup menu on p age 45), the conve r te r gives pr io r ity to HDMI, com p one nt, then com p osite (in that o r de r ).
Connecting your equipment 03 29 En Connecting your TV and play back components Connec ting using HDMI If you have an HDMI o r DVI (with HDCP) equi pp ed com p onent (Blu- r ay disc p laye r (BD), etc.), you can connect it to this r eceive r using a comme r cially available HDMI cable .
Connecting your equipment 03 30 En Connecting yo ur DVD player with n o HDMI output This diag r am shows connections of a TV (with HDMI in p ut) and DVD p laye r (o r othe r p layback co m p onent with no HDMI out p ut) to the r eceive r .
Connecting your equipment 03 31 En Connecting your TV with no HDMI input This diag r am shows connections of a TV (with no HDMI in p ut) and DVD p laye r (o r othe r p layback com p onent) to the r eceive r .
Connecting your equipment 03 32 En Connecting an HDD/DVD recorder, B D recorder and other video sources This r eceive r has two sets of audio/video in p uts and out p uts suitable fo r connec ting analog o r digit al video devices , including HDD/DVD r eco r de r s and BD r eco r de r s.
Connecting your equipment 03 33 En Connecting a satellit e/cable receiver or other set-top box Satellite and cabl e r eceive r s, and te rr est r ial digital TV tune r s a r e all exam p les of so-called ‘set-to p boxes’.
Connecting your equipment 03 34 En Connecting the multichannel analog inputs Fo r DVD Audio and SAC D p layback, you r DVD p laye r may have 5.1, 6.1 o r 7.1 channel a nalog out p uts (de p ending on whethe r you r p laye r su pp o r ts su rr o u n d b a c k c h a n n e l s ) .
Connecting your equipment 03 35 En Connecting other audio components This r eceive r has bot h digital a nd analo g in p uts, allowing you to conn ect audio com p onents fo r p layback.
Connecting your equipment 03 36 En Connecting additional amplifiers This r eceive r has mo r e than enough p owe r fo r any home use, but it’s p ossible to add additional am p lifie r s to eve r y channel o f you r system using the pr e-outs. Make the connections shown below to add am p lifie r s to p owe r you r s p eake r s.
Connecting your equipment 03 37 En Connec ting external an tennas To im pr ove FM r ece p tion, connec t an exte r nal FM antenna to FM UNBAL 75 Ω . To im pr ove AM r ece p tion , connect a 5 m to 6 m (16 ft. to 20 ft.) length of vinyl-coated wi r e to the AM LOOP te r minal s without disconnecting the su pp lied AM loo p antenna.
Connecting your equipment 03 38 En MULTI-ZONE se tup using speaker terminals (ZONE 2) You must select ZONE 2 in Spea ker system se tting on p age 115 to use this setu p .
Connecting your equipment 03 39 En Connecting Optional Bluetooth ® ADAPTER When the Bluetooth ADAPTER (Pionee r Mode l No. AS- BT100) 1 is connected to this r eceive r , a pr oduct equi pp ed with Bluetooth wi r eless technology ( p o r table cell p hone, digital mu sic p laye r , etc.
Connecting your equipment 03 40 En Connecting an iPod This r eceive r has a dedicated iPod te r minal that will al low you to cont r ol p layback o f audio content f r om you r iPod using the cont r ols of this r eceive r .
Connecting your equipment 03 41 En Connecting an IR receiver If you kee p you r ste r eo com p onents in a closed cabinet o r shelving unit, o r you wish to use the sub zone r emote cont r ol in anoth.
Connecting your equipment 03 42 En Switching compo nents on and o ff using the 12 volt trigge r You can connect c om p onents in you r system (such as a sc r een o r pr ojecto r ) to this r eceive r so that they switch on o r off using 12 volt t r igge r s when you select an in p ut function.
Basic Setup 04 43 En Chapter 4: Basic Setup Important •T h e pr ocedu r e fo r setting the r eceive r o p e r ation mode diffe r s fo r the r emote cont r ols included with the SC-37 and SC-35. Fo r the SC-37’s r emote cont r ol, set the r emote cont r ol o p e r ation sel ecto r switch to RECEIVER .
Basic Setup 04 44 En Make su r e the r e a r e no obstacles between the s p eake r s and the mic r o p hone. If you have a t r i p od, use it to p lace the mic r o p hone so that it’s about ea r level at you r no r mal listening p osition. If you do not have a t r i p od, use some othe r ob ject to ins tall the mic r o p hone.
Basic Setup 04 45 En • If you see an ERR message ( o r the s p eake r configu r ation dis p layed is n’t co rr ect), the r e may be a pr oblem with the s p eake r connecti on. If selecting RETRY doesn’t wo r k, tu r n off the p owe r and check the s p eake r connections.
Basic Setup 04 46 En • Input Skip – W hen se t to ON , that in p ut is sk i pp ed when select ing the in p ut using INPUT SELECT . ( DVD and othe r in p uts can be still be selected di r ectly with the in p ut function buttons.
Basic playback 05 47 En Chapter 5: Basic playback Important •T h e pr ocedu r e fo r setting the r eceive r o p e r ation mode diffe r s fo r the r emote cont r ols included with the SC-37 and SC-35. Fo r the SC-37’s r emote cont r ol, set the r emote cont r ol o p e r ation sel ecto r switch to RECEIVER .
Basic playback 05 48 En Playing an iPod This r eceive r has the iPod/iPhone/USB te r minal that will allow you to co nt r ol p layback of audio conten t f r om you r iPod using the cont r ols of this r eceive r . 1 1 Switch on the receiver and your TV.
Basic playback 05 49 En Switching the iP od controls 1 You can switch ove r the iPod cont r ols between the iPod and the r eceive r . 1P r e s s iPod CTRL to switch the iPod controls. This enables o p e r ation and dis p lay on you r iPod, and this r eceive r ’s r emote cont r ol and GUI sc r een become inactive.
Basic playback 05 50 En 3 Continue browsing un til you arrive at what you want to play, th en press to start playback. 1 Basic pla yback contro ls This r eceive r ’s r emote cont r ol buttons can be used fo r basic p layback of files sto r ed on USB m emo r y devices.
Basic playback 05 51 En About playable file format s The USB function of this r eceive r su pp o r ts the following file fo r mats. Note that some file fo r mats a r e not available fo r p layback although they a r e listed as p layable file fo r mats.
Basic playback 05 52 En Listening to the radi o The following ste p s show you how to tune in to FM and AM r adio b r oadcasts using t he automatic (sea r ch) and manual (ste p ) tuning functions. If you al r eady know the f r equency of the station you want, see Tuning directly to a station below.
Basic playback 05 53 En Naming station presets Fo r easie r identification , you can name you r station pr esets. 1 Choose the station preset you want to name. See Listening to station pres ets on p age 52 fo r how to do this. 2P r e s s T.EDIT ( TUNER EDIT ).
Basic playback 05 54 En •T h e c u rr ently selected channel is autom atically chosen (wi thout pr essing ENTER ) afte r five seconds. Using XM HD Surround XM HD Su rr ound uses Neu r al Su rr ound™ tech nologies to achieve o p timal su rr ound sound f r om XM r adio.
Basic playback 05 55 En Selecting channels and browsing by genre F r om the SIRIUS Channe l Guide, you can b r owse SIRIUS Radio channels in the o r de r that they a pp ea r , o r you can na rr ow you r channel sea r ch by gen r e.
Basic playback 05 56 En Listening to Intern et radio stations (SC-35 only) Tip • This section desc r ibes how to listen to Inte r net r adio on the SC-35. On the SC-37, Inte r net r adio is o p e r ated with Home Media Galle r y. Fo r details, see Playback with HOME MEDIA GALLERY inputs (SC-37 only) on p age 64.
Basic playback 05 57 En 1 Turn on the computer and launch the Internet browser. 2 In the address bar on the browser, ent er the IP address assigned to this receiver. Fo r exam p le, if the IP add r ess of this r eceive r is “192.168.0.2”, ente r “htt p ://192.
Basic playback 05 58 En Pairing the Bluetooth ADAPTER and Bluetooth wireless technology device “Pai r ing” must be done befo r e you sta r t p layback of Bluetooth wi r eless technology content using the Bluetooth ADAPTER.
Listening to your system 06 59 En Chapter 6: Listening to your system Important •T h e pr ocedu r e fo r setting the r eceive r o p e r ation mode diffe r s fo r the r emote cont r ols included with the SC-37 and SC-35. Fo r the SC-37’s r emote cont r ol, set the r emote cont r ol o p e r ation sel ecto r switch to RECEIVER .
Listening to y our system 06 60 En • 2 Pro Logic IIz HEIGHT – U p to 7.1 channel so und (f r ont height) 1 • WIDE SURROUND MOVIE – U p to 7.1 channel sound (f r ont wide), e s p ecially suited to movie sou r ces 2 • WIDE SUR ROUND MUSIC – U p to 7.
Listening to your system 06 61 En Using the Advanced surround effects The Advanced su rr ound e ffects can be used fo r a va r iety of additional su rr ound sound effe cts. Most Advanced S u rr ound modes a r e designed to be used with film soundt r acks, but some modes a r e also su ited fo r music sou r ces.
Listening to y our system 06 62 En Using Stream Direct Use the St r eam Di r ect modes when you want to he a r the t r uest p ossible r e pr oduction of a sou r ce. All unnecessa r y signal pr ocessing is by p assed, and you’ r e left with the p u r e analog o r digital sound sou r ce .
Listening to your system 06 63 En Phase Cont r ol techno logy pr ovides cohe r ent sound r e pr oduction th r ough th e use of p hase matching 1 fo r an o p timal sound i mage. The de fault settin g is on and w e r ecommend leaving Ph ase Cont r ol switched on fo r all sound sou r ces.
Playback with HOME MEDIA GALLERY inputs (SC-37 only) 07 64 En Chapter 7: Playback with HOME MEDIA GALLERY inputs (SC-37 only) Enjoying the Home Media Gall ery This r eceive r ’s Home Media Galle r y.
Playback with HOME MEDIA GALLERY inputs (SC-37 only) 07 65 En the PC. The autho r ization (o r p e r mission) method fo r access va r ies de p ending on the ty p e of se r ve r cu rr entl y being connected. Fo r mo r e info r mation on autho r izing t his r eceive r , r efe r to th e inst r ucti on manual of you r se r ve r .
Playback with HOME MEDIA GALLERY inputs (SC-37 only) 07 66 En Listening to Internet radio stations Inte r net r adio is an au dio b r oadcasting se r vice t r ansmitte d via the Inte r net. The r e a r e a la r ge numbe r of Inte r net r adio stat ions b r oadcasting a va r iety of se r vices f r om eve r y co r ne r of the wo r ld.
Playback with HOME MEDIA GALLERY inputs (SC-37 only) 07 67 En Listening to Sirius Internet Radio Check the website below to listen to Si r ius Inte r net Radio : htt p ://www.si r ius.com/si r iusinte r net r adio • Y ou must have a r egiste r ed account in o r de r to listen to songs using Si r ius Inte r net Radio.
Playback with HOME MEDIA GALLERY inputs (SC-37 only) 07 68 En Checking about the Accounts Sc r een conce r ning Rha p sody o r Si r ius I nte r net Radio account r egist r ation . Befo r e pr oceeding with the following ste p s, check whethe r you have followed Ste p s f r om 1 to 2 on p age 65.
Playback with HOME MEDIA GALLERY inputs (SC-37 only) 07 69 En About playback behavi or over a network • Playback may stall when the PC is switch ed off o r any media files sto r ed on it a r e deleted while p laying content. •I f t h e r e a r e pr oblems within the netwo r k envi r onment (heavy netwo r k t r affic, etc.
Playback with HOME MEDIA GALLERY inputs (SC-37 only) 07 70 En About playable file formats The Home Media Galle r y featu r e of this r eceive r su pp o r ts the following file fo r mats. Note that some file fo r mats a r e not available fo r p layback although they a r e listed as p layable file fo r mats.
Playback with HOME MEDIA GALLERY inputs (SC-37 only) 07 71 En Glossary aacPlus AAC decoder use s aacPlus developed by Coding Technologies. (www.cod ingtechnologies.com) FLAC FLAC (F r ee Lossless Audio Codec) is an audio fo r mat allows lossless codec.
Control with HDMI function 08 72 En Chapter 8: Control with HDMI function Important •T h e pr ocedu r e fo r setting the r eceive r o p e r ation mode diffe r s fo r the r emote co nt r ols included with the SC-37 and SC-35. Fo r the SC-37’s r emote cont r ol, set the r emote con t r ol o p e r ation selecto r switch to RECEIVER .
Control with HDMI function 08 73 En HDMI Setup You must adjust the settings of this r eceive r as well as the connected Control with HDMI-com p atible com p onents in o r de r to make use of the Control with HDMI function. Fo r mo r e info r mation see the o p e r ating inst r uctions f o r each com p onent.
Control with HDMI function 08 74 En About synchronized operations The Control with HDMI-com p atible com p onent connected to the r eceive r o p e r ates in sync as desc r ibed below.
Control with HDMI function 08 75 En Setting the PQLS function PQLS (P r ecision Qua r tz Lock System ) is a digita l audio signal t r ansfe r cont r ol technology using the Control with HDMI function. It of fe r s highe r -quality audi o p layback by cont r olling audio signals f r om the r eceive r to a PQLS com p atible p laye r , etc.
Using other functions 09 76 En Chapter 9: Using other functions Important •T h e pr ocedu r e fo r setting the r eceive r o p e r ation mode diffe r s fo r the r emote co nt r ols included with the SC-37 and SC-35. Fo r the SC-37’s r emote cont r ol, set the r emote con t r ol o p e r ation selecto r switch to RECEIVER .
Using other functions 09 77 En DUAL (Dual Mono) S p ecifies how du al mono encoded Dol by Digital soundt r acks should be p layed. Dual mono is not widely used , but is sometimes necessa r y when two language s need to be se nt to se p a r ate channe ls.
Using other functions 09 78 En Setting the Video options The r e a r e a numbe r of additional p ic tu r e settings you can make using the VIDEO PARAMETER menu.
Using other functions 09 79 En Switching the speaker terminal s If you selected Speaker B at Speaker system setting on p age 115, you can switch betwe en s p eake r s using the SPEAKERS button. If you selected Normal(SB/FH) , Normal(SB/FW) , Front Bi-Amp o r ZONE 2 , the button will sim p ly switch you r main s p eake r te r minals on o r off.
Using other functions 09 80 En • W hen the r eceive r is on, 1 make su r e that any o p e r ations fo r the sub zone a r e done while ZONE and you r selected sub zone(s) show in the dis p lay. If this is not showing, the f r ont p anel con t r ols affect the main zone on ly.
Using other functions 09 81 En Using the sleep timer The slee p time r switches the r eceive r into standby af te r a s p ecified amount o f time so you ca n fall asle e p without wo rr ying about th e r eceive r being left on all night. Use the r emote cont r ol to set the slee p time r .
Using other functions 09 82 En Resetting the system Use this pr ocedu r e to r eset all the r eceive r ’s settings to the facto r y default. Use the f r ont p anel cont r o ls to do this. Set MULTI-ZONE to OFF . • D isconnect the iP od and USB mem o r y device f r om the r eceive r befo r ehand.
Controlling the rest of your system (In case of SC-37) 10 83 En Chapter 10: Controlling the rest of your system (In case of SC-37) Important • T his section includes ex p lanations fo r the SC-37’s r emote cont r ol.
Controlling the rest of your system (In case of SC-37) 10 84 En Operating multiple receivers The r emote con t r ol included with this r eceive r can be used to o p e r ate u p to th r ee othe r r eceive r s (of the sam e model as this r eceive r ) in addition to this r eceive r .
Controlling the rest of your system (In case of SC-37) 10 85 En • If you can’t fi nd o r pr o p e r ly ente r a pr eset code, you can still te ach the r emote indiv idual commands f r om anothe r r emote cont r ol (see Programming signals from other remote controls below).
Controlling the rest of your system (In case of SC-37) 10 86 En 2U s e / to se lect ‘ ERASE LEAR NING ’, then press ENTER . The r emote dis p lay pr om p ts you fo r the com p onent co rr es p onding to the button setting to be e r ased. 3 Press the input function button corresponding to the command to be erased, then press ENTER .
Controlling the rest of your system (In case of SC-37) 10 87 En r emote cont r ol to set u p and listen to a CD on the r eceive r , and then use the r emote cont r ol to r ewind a ta p e in you r VCR while you continue to listen to you r CD p laye r .
Controlling the rest of your system (In case of SC-37) 10 88 En 8 Repeat steps 5 to 7 to program a sequence of up to commands. 9 When you’re finished, use / to select ‘ EDIT EXIT ’ from the menu and press ENTER . You will r etu r n to the r emote cont r ol Setu p menu.
Controlling the rest of your system (In case of SC-37) 10 89 En Button(s) TV TV (Monitor) BD/DVD HDD/DVR VCR SAT/CATV SOURCE P OWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER.
Controlling the rest of your system (In case of SC-37) 10 90 En Button(s) LD CD/CD- R/SACD MD/DAT TAPE SOURCE POWER ON/O FF POWER ON/ OFF POWER ON /OFF POWE R ON/OFF Numbe r butto ns numerics numerics numerics – • (dot) +10 >10/CLEAR CLEAR a a.
Controlling the rest of your system (In case of SC-37) 10 91 En Using the RF communications function With this r eceive r , two-way communications between the r eceive r and r emote cont r ol a r e p ossible by connecting the included RF ada p te r to th e RS-232C and CU-RF100 te r minals.
Controlling the rest of your system (In case of SC-37) 10 92 En Pairing the RF adapter and remote control Pai r ing is necessa r y in o r de r to use the RF communications function. Pe r fo r m the o p e r ation below afte r connecting the RF a da p te r and r eceive r .
Controlling the rest of your system (In case of SC-37) 10 93 En 1 Connect the IR blaster cable to the RF Adapter’s IR Blaster terminal and mount the transmitter on the component you want to operate with RF communications. •O p e r ation is not p ossible unless the IR blaste r is mounted in an a ppr o pr iate p osition.
Controlling the rest of your system (In case of SC-37) 10 94 En Setting the remote control operation mode •D e f a u l t s e t t i n g : ON When the r emote cont r ol o p e r ation mode i s tu r ned on and the r eceive r ’s i n p ut is switched, the r emote cont r ol dis p lay and o p e r ation mode switch automatically to that in p ut.
Controlling the rest of your system (In case of SC-37) 10 95 En Usable range •D e s i g n e d f o r use only with in pr ivate homes (signal t r ansmission distance may be r educed due to r oom design o r conditions). In the following cases, this r emote cont r ol cannot o p e r ate due to p oo r o r e rr atic r adio wave t r ansmission.
Controlling the rest of your system (In case of SC-35) 10 96 En Controlling the rest of your system (In case of SC-35) Important • This sectio n includes ex p lanatio ns fo r the SC-35’s r emote cont r ol. Fo r inst r uctions fo r the SC-37’s r emote cont r ol, see Controlling the rest of you r system (In case o f SC-37) on p age 83.
Controlling the rest of your system (In case of SC-35) 10 97 En Setting the remote to contr ol other components Most com p onents can be assign ed to one of the in p ut function buttons (suc h as DVD o r CD ) using the com p onent’s manufac tu r e r pr eset code sto r ed in the r emote.
Controlling the rest of your system (In case of SC-35) 10 98 En 3 Point the two r emote controls towards each ot her, then press the button that will be doi ng the learning on this receiver’s remote control. The LED blinks once and flas hes continuously.
Controlling the rest of your system (In case of SC-35) 10 99 En Setting th e backlight mode • Default setting: 1 (normal mode) The backligh t lighting p atte r n can be selected f r om among fou r m o d e s , i n c o n s i d e r ation of conven ience and batte r y se r vice life.
Controlling the rest of your system (In case of SC-35) 10 100 En Programming a Multi operation or a shutdown sequence 1 Press and hold R.SETUP , then press “3” for three seconds. The LED flashes continuously. • To can cel the pr eset setu p mode pr ess R.
Controlling the rest of your system (In case of SC-35) 10 101 En Resetting the remote control settin gs Use this pr oce du r e to r eset all the r emote cont r ol’s settings t o the fact o r y default. 1 1 Press and hold R.SETUP , then press “0” for three seconds.
Controlling the rest of your system (In case of SC-35) 10 102 En a. Cont r ols fo r BD. Button(s) TV TV ( Monitor) BD/DVD HDD/DVR VCR SAT/CA TV SOURCE POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER .
Controlling the rest of your system (In case of SC-35) 10 103 En a. Cont r ols fo r SACD. b. Cont r ols fo r MD. Button(s) LD CD/CD -R/SACD MD/DAT TAP E SOURCE POWER ON/OFF POWER ON/OFF POWER ON/O.
The Advanced MCACC menu 11 104 En Chapter 11: The Advanced MCACC menu Important •T h e pr ocedu r e fo r setting the r eceive r o p e r ation mode diffe r s fo r the r emote co nt r ols included with the SC-37 and SC-35. Fo r the SC-37’s r emote cont r ol, set the r emote con t r ol o p e r ation selecto r switch to RECEIVER .
The Advanced MCACC menu 11 105 En 2 Select the parameters you want to set. Use / to select the item, then use / to set. • Auto MCACC – The default is ALL ( r ecommended), but you can limit the system calib r ation to only one setting (to save time) if you want.
The Advanced MCACC menu 11 106 En If no o p e r ations a r e p e r fo r med fo r 10 seconds while the s p eake r configu r ation check sc r een is bein g dis p layed, the Auto MCACC Setu p will r esume a utomatically. In this case, you don’t need to select ‘ OK ’ and pr ess ENTER in ste p 8.
The Advanced MCACC menu 11 107 En • Standing Wave – Cont r ol ove r ly r esonant low f r equencies in you r listening r o om (see Standing Wave on p age 107).
The Advanced MCACC menu 11 108 En it r esults in an ove r ly r esonant (‘boomy’) sound. The Standing Wave Cont r ol uses filte r s to r educe the effect of ove r ly r esonant sounds in you r listening a r ea. Du r ing p layback of a sou r ce, you can customize the filte r s used fo r Standi ng Wave Cont r ol fo r each of you r MCACC pr esets.
The Advanced MCACC menu 11 109 En Using Acoustic Calibration EQ Professional 1 Select ‘ EQ Professional ’, then press ENTER . 2 Select an option and press ENTER . • Reverb Measurement – Use thi s to measu r e the r eve r b cha r acte r istics befo r e and afte r calib r ation.
The Advanced MCACC menu 11 110 En Precision Distance (SC-37 only ) Befo r e using this functio n, p e r fo r m the Full Auto M CACC Setu p pr ocedu r e (see p age 43).
The Advanced MCACC menu 11 111 En 4P r e s s RETURN to go back to the MCACC Data Check menu, repeating steps 2 and 3 to check other settings. 5 When yo u’re finished, press RETURN . You will r etu r n to the Home Menu . Speaker S etting Use this to dis p lay the s p eake r size an d numbe r of s p eake r s.
The Advanced MCACC menu 11 112 En Output MCACC data Befo r e continuing, make su r e you have com p leted ste p 2 in Checking MCACC Data on p age 110. The data measu r ed with the Advanced MCACC function is t r ansmitte d to the U SB device.
The Advanced MCACC menu 11 113 En Copying MCACC preset data If you want to man ually adjust the Acoustic Calib r ation EQ (see Manual MCACC setup on p age 106), we r ecommend co p ying you r cu rr ent settings 1 to an unused MCACC pr eset. Instead of just a fla t EQ cu r ve, this will give you a r efe r ence p oi nt f r om which to sta r t.
The System Setup and Other Setup menus 12 114 En Chapter 12: The System Setup and Other Setup menus Important •T h e pr ocedu r e fo r setting the r eceive r o p e r ation mode diffe r s fo r the r emote co nt r ols included with the SC-37 and SC-35.
The System Setup and Other Setup menus 12 115 En Speaker system setting • Default setting: Normal(S B/FH) The r e a r e seve r al ways yo u can use the s p eake r te r minals with this r eceive r .
The System Setup and Other Setup menus 12 116 En • Surr – Select LARGE if you r su rr ound s p eake r s r e pr oduce bas s f r equencies effectively.
The System Setup and Other Setup menus 12 117 En X-Curve Most so undt r acks mixed fo r cinema sound too b r ight when p layed back in la r ge r ooms. The X-Cu r ve sett ing acts as a kind of r e-equalization fo r home theate r listening, and r esto r es pr o p e r tonal balance of movie so undt r acks.
The System Setup and Other Setup menus 12 118 En IP address/Proxy setting In case the r oute r connected to the LAN te r minal on this r eceive r is a b r oadband r oute r (with a built-in DHCP se r ve r function), sim p ly tu r n on th e DHCP se r ve r function, and you will not need to set u p the netwo r k manually.
The System Setup and Other Setup menus 12 119 En The Other Setup menu The Other Setu p menu is whe r e you can make customized set tings to r eflect h ow you a r e using th e r eceive r . 1 Set the remote control to the receiver operation mode, then press HOME MENU .
The System Setup and Other Setup menus 12 120 En Flicker Reduction Setup •D e f a u l t s e t t i n g : OFF The GUI sc r een’s r esolution can be inc r eased.
Additional in formation 13 121 En Chapter 13: Additional information Speaker Setting Guide In o r de r to achieve an even bette r su rr ound effect, it is im p o r tant to accu r ately p osition the s p eake r s and make thei r volume an d tone cha r acte r istics unifo r m so as to finely focus t he multi-channe l sound.
Additional information 13 122 En Tip • The distance to the subwoofe r may be slig htly la r ge r than the distance actually measu r ed with a ta p e measu r e, etc. T his is because this di stance is co rr ected fo r elect r ic delay , and is not a pr oblem.
Additional in formation 13 123 En No sound Du r ing loud p layback the p owe r suddenly switches off. • Tu r n down the vo lume. • Lowe r the 63 Hz and 125 Hz equalize r le vels in the Manual MCACC setup on p age 106. • Switch on th e digital safe ty featu r e.
Additional information 13 124 En Other audio problems No sound f r om subwoofe r . • Check that the subwo ofe r is connected pr o p e r ly, switched on and the volume tu r ne d u p . • If you r subwoofe r has a slee p function, make su r e it is switched off.
Additional in formation 13 125 En ADAPTER PORT Video The PHASE CONTROL featu r e doesn’t seem to have an audible effe ct. • If a pp licable, check that the low p ass filte r switch on you r subwoofe r is off, o r th e low p ass cutoff is set to the highe st f r equency setting.
Additional information 13 126 En Settings Can’t r ec o r d video. • Che ck that the sou r ce is not co p y- pr otecte d. • The video conve r te r is not av ailable when making r eco r dings.
Additional in formation 13 127 En Professional Calibratio n EQ graphical output Displa y The dis p lay shows KEY LOCK ON when you t r y to make setti ngs. • With the r eceive r in standby, pr ess STANDBY/ON fo r about 10 seconds while holding down SPEAKERS to disa ble the key lock.
Additional information 13 128 En Remote control Web Control Sympt om Remedy Cannot be remote control led. • Set th e remote contro l unit’s remote control m ode so that it match es the setting on the main un it (see Operating multiple receivers on page 84 ( SC-37)/page 96 (SC-3 5)).
Additional in formation 13 129 En HDMI Symptom Remedy The HDMI indicato r blinks continuously. • Check all the p oints below. No p ictu r e o r sound. • This r ece ive r is HDCP-com p atible. Check that the com p onents you a r e connecting a r e also HDCP- com p atible.
Additional information 13 130 En Important information regarding the HDMI connection The r e a r e cases whe r e you may not be able to r ou te HDMI signal s th r ough this r eceive r (this d e p ends on the HDMI- equi pp ed com p onent yo u a r e connecting–check with the manufactu r e r fo r HDMI com p atibility in fo r mation).
Additional in formation 13 131 En Internet radio (SC-35 only) XM radio messages A USB memo r y device is connected and dis p layed, but the audio files sto r ed on the USB memo r y device cannot be p layed back. Some fo r mats of USB memo r y devices, including FAT 12, NTFS , and HFS, cannot be p layed back on this r eceive r .
Additional information 13 132 En SIRIUS radio messages Check Antenna The XM antenna is no t connected to th e XM Mini- Tune r Home Dock o r the X M antenna cable is damaged. Check that the XM an tenna is secu r el y connected to the XM Mini-Tune r Home Dock and check the antenna cable fo r damage.
Additional in formation 13 133 En HOME MEDIA GA LLERY (SC-37 only) Check Sirius Tuner The Si r iusConne ct™ tune r is not pr o p e r ly connected. Check that th e 8 p in mini DIN cable and AC Ada p te r a r e attached secu r ely. Acquiring Signal The SIRIUS signal is t oo weak at the cu rr ent location.
Additional information 13 134 En About status messages (SC-37 only) Refe r to the following info r mation when you come u p with a status message while o p e r ating the Home Media Galle r y. Cannot access the com p onent connected to the netwo r k. The com p onent connected to the n etwo r k is not pr o p e r ly set.
Additional in formation 13 135 En If the pr oblem is not solved af te r the t r oubleshooting above, if the sc r een f r eezes unex p ectedly o r if the buttons on the r emote cont r ol o r f r ont p .
Additional information 13 136 En co rr ecting the tonal and s p atial e rr o r s that occu r . On this pr oduct, when the THX indicato r is on, THX featu r es a r e automatically added in Cinema modes (e.
Additional in formation 13 137 En About iPod “Made fo r iPod” means that an elect r onic accesso r y has been designed to connect s p eci fically to iPod and has been ce r tified by th e develo p e r to meet A pp le p e r fo r mance standa r ds.
Additional information 13 138 En Auto Surround, ALC and Stream Direct with diff erent input signal formats The following cha r ts show what you will hea r with diffe r ent i n p ut signal fo r mats, de p ending on the St r eam Di r ect mode (see Using Str eam Dire ct on p age 62) you ha ve selected.
Additional in formation 13 139 En Preset code list (SC-35 only) You should have no pr oblem cont r olling a com p onent if you find the manufactu r e r in this list, bu t p lease note that the r e a r e cases whe r e codes fo r the manufactu r e r in the list will not wo r k fo r the model that you a r e using.
Additional information 13 140 En Samsung 0004, 0005, 0006 , 0007, 0022, 0032, 0076 , 0077, 0083, 0100, 0110 Sansui 0025 Sanyo 0004, 0050 Sceptre 0072 Scotch 0006 Scott 0004, 00 06, 000 7, 0008 , 0009,.
Additional in formation 13 141 En VCR Pioneer 1035 ABS 1017 Adventura 1005 Aiwa 1005 Alienware 1017 American High 1004 Asha 1002 Audio Dynamics 1000 Audiovox 1003 Bang & Ol ufsen 1032 Beaumar k 10.
Additional information 13 142 En Satellit e Set Top Box (SAT/PV R Combination ) Pioneer 0126, 0128 Bell ExpressVu 6002, 6003 DirecTV 6070, 6 110, 60 62, 61 13, 6060, 60 59, 61 14, 611 5, 6116 Dish Net.
Additional in formation 13 143 En Specifications Amplifier Section Continuous averag e power output of 140 watts* per channel, min., at 8 oh ms, from 20 Hz to 20 000 Hz with no more than 0. 08 %** total harmonic distortion. Multi channel simultaneou s p owe r out p ut (1 kHz, 1 %, 8 Ω ) 7 ch total .
Additional information 13 144 En Number of Furnished Parts Incase of SC-37: MCACC Setu p mic r o p hone (APM7009) . . . . . . . . . . . . . . . . .1 Omni-di r ectional r emote cont r ol (CU-RF100) (AXD7580) . . . . . . . . . . . . . . . . 1 RF ada p te r (AXX7272) .
Additional in formation 13 145 En S001_A1_En Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
Additional information 13 146 En SC-37_35_UXJCB.b ook 146 ページ 2 010年3月 9日 火曜日 午前9時3 2分.
Additional in formation 13 147 En SC-37_35_UXJCB.b ook 147 ページ 2 010年3月 9日 火曜日 午前9時3 2分.
Printed in <ARB7446-A> T o register your product, find the nearest authorized ser vice location, to purchase replacement parts, operating instructions, or accessories, please go to one of follow.
デバイスPioneer SC-35の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pioneer SC-35をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer SC-35の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer SC-35の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer SC-35で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer SC-35を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer SC-35の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer SC-35に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer SC-35デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。