PioneerメーカーSTZ-D10S-Lの使用説明書/サービス説明書
ページ先へ移動 of 35
Operating Instructions PORTABLE MUSIC SYSTEM STZ-D10T -G STZ-D10S -L.
2 En The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser vicing) instructions in the literature accompanying the appliance.
3 En Read these instructions. Keep these instructions. Heed all warnings. F ollow all instructions. Do not use this apparatus near water . Clean only with dr y cloth. Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions.
4 En [U.S. model only] [For U.S.A. customers / Pour la clientèle aux États-Unis] [European model only] [Canadian model only] [For Taiwan exclusively] [Except european model] Information to User Alterations or modifications carried out without appropriate authorization may invalidate the user ’s right to operate the equipment.
5 En Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
6 En Introduction Checking what’s in the box ! Remote control unit ! Lithium battery (CR2025) ! USB cable ! AC adapter (1 set) ! Warranty card ! Quick start guide Installing the unit ! When installing this unit, make sure to put it on a level and stable surface.
7 En Use in a wet environment (STZ-D10S) STZ-D10S is not drip-proof. When using, prevent exposure to water. Do not use in the following environments. ! Humid places ! Places where the product is easily exposed to w ater. ! Near the beach or on the beach.
8 En Before you start Before using the remote control The battery supplied with this unit is stored in the battery casing. Remove the protective seal from the battery casing. Note When you notice a decrease in the operating range, replace the battery.
9 En Using the remote control The remote has an angle of about 30º from the remote sensor. CALL MENU TOOL S STA NDBY/O N 8 SKI P 8 SKI P TEMPO TEMPO VOL FUNC ENTER MEMO BA TTLE RHYTH M DJ MI X EX.
10 En 2 Plug the supplied AC adapter into the DC IN socket on the back of the unit. STZ-D10T only: To use the AC adapter, open the outlet cover on the back of the unit.
11 En 2 Insert six AA/LR6 batteries into the battery compartment following the indications (+,-) inside the compartment. 3 Return the battery cover to its position and tighten the LOCK screw to fix it back in place. Make sure the hooks on the battery cover are locked in place.
12 En Controls and displays Remote control unit CALL MEN U T OOL S ST ANDBY/O N 8 SKIP 8 SKIP T EMPO T EMPO VO L FUNC E NTE R MEMO BA TTLE RHYTHM DJ MIX EXIT CUE 1 1 1 1 1 1 1 2 2 2 2 2 2 2 6 6 6 6 6 .
13 En Front/Top panel ST A NDBY / ON DJ MIX BA T TLE FUN C TEMP OV OL 1 1 1 1 1 1 1 2 2 2 2 2 2 2 5 5 5 5 5 5 5 6 6 6 6 6 6 6 4 4 4 4 4 4 4 3 3 3 3 3 3 3 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 9 9 .
14 En Rear panel DC IN 12 VA UX IN 5V 500m A US BP C connect PHONES LOCK HOLD (STZ-D10T) 1 1 1 1 1 1 1 2 2 2 2 2 2 2 3 3 3 3 3 3 3 5 5 5 5 5 5 5 6 6 6 6 6 6 6 7 7 7 7 7 7 7 8 8 8 8 8 8 8 4 4 4 4 4 4 4 1 HOLD button In order to prevent mistaken operation during transport of the device, hold down this button for approx.
15 En Basic playback How to use This is the device’s basic playback operation. If you select a different function at step 3, the device will switch to a sound source from an external input, USB or iPod. 1 Press u STANDBY/ON to turn on the power of this unit.
16 En Playing tracks from an internal memory or USB memory Memor y USB Listen to music by connecting a USB memory device that has your music files to the device. Further, you can listen to music anytime by storing music files in the internal memory of the device using the music management software “MIXTRAX” via a PC.
17 En 5 Start a track playback. The following will be displayed on the playback screen. Memory Song2 Artist1 1:40 5:25 109 +10% CU E BPM 1 2 3 4 5 6 7 8 9 10 11 12 1 Function 2 Song name 3 Artist name.
18 En Playback in a Folder mode USB You can playback tracks stored in a USB memory device by selecting a folder. ! The dance function cannot be used in a folder mode playback. ! This unit can display folders up to 20 hierarchies. 1 Select Folder in the initial screen of the USB memory and select folders and tracks for a playback.
19 En Playing tracks from an iPod/iPhone iPod You can playback tracks by connecting your iPod and iPhone to the product. You can playback from iPod and iPhone using the remote control provided by the product. Confirm what iPod/iPhone models are supported The product can playback sound from the following iPod/iPhone.
20 En 1 Rotate the iPod case until it is in a vertical position. 2 Open the iPod cover, then move the iPod hold to the upmost position before connecting the iPod/iPhone to the connectors. 3 Hold the left and right sides of the iPod hold and slide it down to the top of the iPod/iPhone.
21 En 4 Make sure that the iPod/iPhone is fixed in place, then close the iPod cover and rotate the iPod case horizontally. Connecting your iPod/iPhone (STZ-D10S) Important When carrying the device around you must remove the iPod/iPhone and close the iPod cover.
22 En About iPhone playback ! Sound will only switch from iPhone to the device after authentication process is completed in approximately 10 seconds. ! Incoming calls will pause the playback and iPhone ringtones will be heard from the device speakers only.
23 En Various dance functions The product features excellent dance functions that allows you to enjoy dancing using your own music data. The dance function can be used using the music stored in the internal memory or your own USB memory device.
! There is a five-second countdown (for preparation) before the battle begins (the track from the selected Genre will start playing back). ! When the battle is finished, a voice will playback announcing the completion of the battle (randomly selected from multiple voices).
25 En Using the DJ Mix mode Memory / US B / STEEZ Playback of music tracks from a pre-selected genre. All tracks of the Dance Genre will be played back in an order that allows continuous dancing. 1 With the power turned on, press MENU. Menu screen appears on the front panel display.
2 Use a / b to select ‘Rhythm Machine’, then press ENTER. A Rhythm Sequence selection screen for the Rhythm Machine mode will be shown. R hythm Machine Preset 1 Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 3 Start a track playback by selecting a rhythm sequence.
27 En Connecting a PC Installing the music management software MIXTRAX onto your PC will and then transferring music data analyzed by MIXTRAX across to the device will allow you to use various dance functions. MIXTRAX can be downloaded by either of the following methods.
28 En Updating the firmware Important ! Cannot be updated if the unit is using batteries. Connect the unit to an AC adaptor, and update after connecting the unit to a PC. ! Do not in any circumstances unplug the power cord until “Update completed.” is displayed when the firmware is being updated in accordance with the 7 steps below.
29 En Using the Setup menu Configure setting such as audio quality for tracks that are played back on the device, the playback method, power, and display. 1 With the power turned on, press MENU. Menu screen appears on the front panel display. Menu Battle Battle DJ Mi x Rhythm Machin e Setu p 2 Use a / b to select ‘Setup’, then press ENTER.
30 En Configure the power saving settings By configuring the power saving settings, you can save the battery’s power and reduce the amount of power used. To configure the power saving settings, select Power Save in the Setup menu. You can set Display Off and Auto Power Off separately for when operating by battery or AC adapter.
31 En Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there.
32 En iPod/iPhone The device doesn’t recognize iPod touch/iPhone. ! Try the following. 1. Simultaneously keep pressing the sleep button and home button on the iPod touch or iPhone for over 10 seconds to restart. 2. Turn on the device. 3. Connect the iPod touch/iPhone to the device.
33 En Playable music file formats The music files that the device can play back from the internal memory and USB memory devices are as follows. Category Extension Stream Sampling frequency Bitrate MP3 .
34 En Specifications Amplifier section RMS power output Front Left/Right .......................................................................................................................................................... 2.5 W + 2.5 W (1 kHz, 10 %, T.
PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanaga wa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P. O. BO X 1540, Long Beach, California 90801-1540, U.
デバイスPioneer STZ-D10S-Lの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pioneer STZ-D10S-Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer STZ-D10S-Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer STZ-D10S-Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer STZ-D10S-Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer STZ-D10S-Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer STZ-D10S-Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer STZ-D10S-Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer STZ-D10S-Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
