PioneerメーカーVSX-29TXの使用説明書/サービス説明書
ページ先へ移動 of 76
AUDIO/VIDEO MUL TI-CHANNEL RECEIVER VSX-29TX Operating Instructions.
2 IMPOR T ANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference. HEED WARNINGS — All warnings on the product and in the operating instructions should be adhered to.
4 Features Decoding of Dolby Digital, Dolby Pro Logic and DTS (Digital Theater Systems) DTS is the latest and most widely used digital theater system for cinemas throughout the world. The decoder has been incorporated into this receiver and is able to achieve high sound quality as well as produce dynamic sur - round sound effects.
5 OPERA TION SET UP PREP ARA TION T able of Contents Before Y ou Start .......................................................................... 6 Checking the Supplied Accessories .......................................................... 6 How to Use This Manual .
6 Loading the batteries Load the batteries into the remote control as shown below . The remote control uses a lot of power due to the LCD display so please use alkaline batteries. Depending on individual use you may have to change the batteries fairly often but most users should be able to get an average of 1-3 months of battery life.
7 OPERA TION SET UP PREP ARA TION Before Y ou Start Operating range of remote control unit The area in which you can use the remote control to operate the VSX-29TX is fairly large. T o use, point the remote control toward the remote sensor on the front panel of this unit while within the range shown below .
8 Audio Components T o begin set up connect your audio components to the jacks as shown below . These are all analog connections and your analog audio components (turntable, cassette deck) use these jacks.
9 PREP ARA TION Connecting Y our Equipment V ideo Components Connect your video components to the jacks as shown below . Regarding digital video components (like a DVD), you must use the analog connec.
10 Connecting Y our Equipment Digital Connections In order to use Dolby Digital/DTS soundtracks you need to make digital audio connections. Y ou can do this by either coaxial or optical connections (you don’ t need to do both).
11 PREP ARA TION Connecting Y our Equipment DVD/LD player or LD player Example Connection for a DVD/LD or LD player Make sure you connect your DVD/LD or LD players using both the AC-3 RF jack and a coaxial or optical connection. If your player has an AC-3 RF output this will ensure you can use all LDs (see p.
12 Connecting Y our Equipment Using external antennas 7 T o improve FM reception Connect an external FM antenna. 7 T o improve AM reception Connect a 15 to 18 feet (5~6 meter) length of vinyl-coated wire to the AM antenna terminal in addition to the supplied AM loop antenna.
13 PREP ARA TION Connecting Y our Equipment 3/8 in. (10 mm) The speaker terminals also accept single banana plugs. (Refer to speaker manual for details.) 7 Speaker terminals 1 T wist exposed wire strands together . 2 Loosen speaker terminal and insert exposed wire.
14 • Install the left and right front speakers at equal distances from the TV . • When installing speakers near the TV , we recommend using magnetically shielded speakers to prevent possible interference such as distortion in the color of the TV screen.
15 PREP ARA TION Connecting Y our Equipment Connecting Additional Amplifiers Although the VSX-29TX has more than sufficient power for any home use, it is possible to add additional amplifiers to your system. If you want to use separate amplifiers to power your speakers, make the connections shown below .
16 Displays & Controls Front Panel All the controls on the front panel are explained and/or referenced here. T o open the front panel push gently on the lower third of the panel. 1 ST ANDBY/ON button Press to switch the receiver ON or into ST ANDBY mode.
17 PREP ARA TION Displays & Controls @ LOUDNESS button (See p.41) Switches the LOUDNESS mode on or off. # MIDNIGHT button (See p.40) Switches the MIDNIGHT LISTENING mode on or off. $ DIGIT AL NR button (See p.39) Switches the DIGIT AL NR on or off (STEREO mode only).
18 Displays & Controls Display All the display information is explained and /or referenced here. 8 STEREO indicator (See p.35-36) Lights when a STEREO mode is selected. 9 Radio Frequency/Function indicator Displays the function or the frequency of the current radio station.
19 PREP ARA TION Remote Control These pages describe the buttons on the remote control used to operate the receiver . Since the screen on this LCD remote control changes when you select a different function, explanations of buttons for controlling other components/ functions can be found in the sections for those components/functions.
20 Displays & Controls Basic Receiver LCD Screens Receiver MAIN Screen 1 Receiver MAIN button Press this button to select the main receiver screen (above) when the remote control is on the sub receiver screen. 2 EFFECT +/- button Use these buttons to increase or decrease the amount of effect applied in a DSP or Advanced Theater mode.
21 SET UP Setting Up the Remote Control Since this remote is based on LCD screens, you should try and get used to the touch-sensitive nature of the buttons as well as the way in which different screens control different operations.
22 Y ou can press EXIT anytime to go back a screen or repeatedly to escape this set up mode. memo 4 Press each cross point in the middle to align the remote control touch panel with the LCD panel underneath. This adjustment will make sure your remote control is calibrated correctly .
23 SET UP Initial Set Up Setting Up for Surround Sound T o ensure the best possible surround sound, complete the following set up operations. Y ou only need to make these settings once (unless you change the placement of your current speaker system or add new speakers, etc.
24 Initial Set Up SPEAKER SETTING The following steps show you how to select the correct set up for the type and number of speakers you connected. If continuing from the previous page go to step 1. If starting fresh, complete steps 1-3 on p.23 first. 1 Press SPEAKER SETTING.
25 SET UP Initial Set Up dB SIGNAL SELECT ANALOG SP A VOLUME 3 Press SETUP OK to return to the SYSTEM SETUP MENU. Hold the remote control pointed towards the receiver until you see the “RECEIVED” display on the receiver . If "ERROR" flashes in the display , perform the setup operations from the first step again.
26 1 Press CHANNEL DELA Y . The CHANNEL DELA Y speaker settings will appear on your remote control screen. 2 Select each speaker by pressing its button and use the +/– (or % / fi ) buttons to add or subtract the distance in feet that the speaker is from your normal listening position.
27 SET UP Initial Set Up 1 Press the CHANNEL LEVEL button. The CHANNEL LEVEL settings will appear on your remote control screen. 2 Select a test tone mode by pressing one of the TEST TONE buttons. Output the TEST TONE. AUTO (automatic TEST TONE) This mode switches the test tone between each speaker automatically .
28 dB STEREO SIGNAL SELECT ANALOG SP A AUTO VOLUME 3 Using the remote control display , follow the instructions below to adjust the speaker levels so that you hear the test tone at the same volume from each speaker when seated in your normal listening position.
29 SET UP Initial Set Up CROSSOVER NETWORK The following steps show you how to adjust the crossover network. The crossover network is the frequency at which the system divides the signal and sends the different parts (high ,mid, low) to different speakers.
30 Initial Set Up 1 Press BASS PEAK LEVEL MANAGER. 2 Press the TEST TONE button. The MASTER VOLUME rotates to MIN (----dB). A test tone will sound or not depending on which speakers you have selected. If sub woofer is YES (or on PLUS) the test tone will only sound from the sub woofer .
31 SET UP DYNAMIC RANGE CONTROL This feature makes it possible to enjoy full surround sound effects on Dolby Digital sources even at low volumes. It does this by compressing the dynamic range. Dynamic range is the difference between the loudest and the softest sounds in any given signal.
32 DIGIT AL INPUT SELECT In order to be able to use your digital equipment properly you need to assign digital inputs for each of the digital components you connected. Match the DIGIT AL IN buttons 1-4 with the digital jacks 1-4 in accordance with what component is hooked up to each digital jack.
33 SET UP OPERA TION Basic Playback Playing Source with Stereo Sound The following instructions show you how to play audio or audio-visual sources with the VSX-29TX. If the T APE 2 indicator is visible in the display , it means the T APE 2 MONITOR is on.
34 Sound Modes The five sound modes on the VSX-29TX are explained here. These can be turned on from the front panel or from the RECEIVER MAIN SCREEN on the remote control. There are three cinema modes: ST ANDARD, HOME THX CINEMA, and ADV ANCED THEA TER.
35 SET UP OPERA TION Basic Playback Basic Playback DSP modes The DSP (Digital Signal Processing) modes allow you to transform your living room into a variety of different sonic environments when playing either two-channel or multi-channel sources. HALL 1 Simulates the acoustic effects of a large concert hall.
36 1 Press RECEIVER. This sets the remote to select the sound mode. (Y ou can skip this step when using the controls on the receiver .) 2 Select the sound mode.
37 SET UP OPERA TION Basic Playback Playing Source with Dolby Digital or DTS Sound The following instructions show you how to play Dolby Digital or DTS sound sources with the VSX-29TX. 1 T urn on the receiver and press the RECEIVER button on the remote control.
38 Switching ANALOG/DIGIT AL Signal Input This button selects the type of input, ANALOG, DIGIT AL or AC-3 RF , sent to the receiver . Y ou need to take special care to switch to the appropriate input, when necessary .
39 SET UP OPERA TION Reducing noise during playback (DIGIT AL NR function) T o reduce extraneous noise switch on DIGIT AL NR. This noise reduction can only be used in the STEREO mode. 1 Press STEREO on the remote control’ s Receiver MAIN screen or on the front panel.
40 External decoder playback This feature allows you to connect an external decoder to enjoy certain types of specialized discs. Press EXTERNAL 5.1 ch on the remote control’ s Receiver SUB screen. On the front panel press EXTERNAL DECODER IN. Each press switches the input between the previous mode and EXTERNAL DECODER.
41 SET UP OPERA TION Adjusting bass and treble (tone control) Use BASS (+/–) or TREBLE (+/–) to adjust the low and high frequencies (the receiver must be in STEREO mode). Press BASS (+/–) on the remote control’ s Receiver SUB screen or on the front panel to adjust the low frequencies.
42 Adjusting the brightness of the display (front panel only) Use the FL DIMMER button to adjust the brightness of the fluorescent display (FL=fluorescent display). Press FL DIMMER. Four levels of brightness ranging from very dim to very bright can be selected.
43 SET UP OPERA TION Using the T uner Automatic and Manual T uning The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the exact frequency of the station you want, see “Direct Access T uning“ on the following page.
44 1 Press TUNER. This selects the TUNER function on the receiver and sets the remote to the TUNER operation mode. 2 Press BAND button on the remote to select the band (FM or AM). Each press switches the band : FM j AM 3 Press DIRECT ACCESS to activate the direct access tuning mode.
45 SET UP OPERA TION Using the T uner Memorizing Frequently Used Stations The following steps show you how to memorize up to 30 radio stations in 3 classes (each holding 10 stations). When memorizing FM frequencies, the receiver also memorizes the MPX mode (STEREO or MONO).
46 Using the T uner Recalling Memorized Stations Using the remote control 1 Press TUNER. This selects the TUNER function on the receiver and sets the remote to the TUNER operation mode. 2 Press CLASS repeatedly to select a class number . Each press switches the display: 3 Use the number buttons to select the channel you desire.
47 OPERA TION 1 Press REMOTE SETUP . The REMOTE SETUP menu appears on the remote control's screen. 2 Press PRESET RECALL on the LCD screen. The step by step process will appear on the screen.
48 4 Choose the component you want to set up. In the example in the diagram on the left, DVD was selected in step 3. Thus, [DVD/LD] appears in the top bar after Preset Recall.
49 OPERA TION Learning mode: Programming signals from other remote controls If preset codes are not available for your component(s), or the available preset codes do not operate correctly , you can use this procedure to program in signals from the remote control(s) of your other component(s).
50 Remote Control of Other Components 5 ~ 12 inches memo 5 Point the two remote controls toward each other . Press the button on the other remote control corresponding to the operation you want to program. LEARNING flashes in the display on the remote control.
51 OPERA TION 1 Press to switch the LD player on or off. 2 4˜¢ 4 : Press to return to the beginning of the current chapter (track). Press repeatedly to return to the beginning of previous chapters (tracks). ¢ : Press to advance to the beginning of the next chapter (track).
52 Remote Control of Other Components CD player operations • The following operations are available from the receiver's remote control after you program your CD player into it, but some operations may need to be learned separately by the receiver (see “Setting Up the Remote Control to Control Other Components,“ p.
53 OPERA TION Remote Control of Other Components MD operations • The following operations are available from the receiver's remote control after you program your MD recorder into it, but some operations may need to be learned separately by the receiver (see “Setting Up the Remote Control to Control Other Components,“ p.
54 TV operations • The following operations are available from the receiver's remote control after you program your TV into it, but some operations may need to be learned separately by the receiver (see “Setting Up the Remote Control to Control Other Components,“ p.
55 OPERA TION STB (DTV) operations • The following operations are available from the receiver's remote control after you program your digital tuner into it, but some operations may need to be learned separately by the receiver (see “Setting Up the Remote Control to Control Other Components,“ p.
56 1 Press to switch the satellite tuner on or off. 2 EXIT Press to exit the current setting of the SA T . 3 OFF/ON Press to switch the satellite tuner off. 4 CH –/+ Use to chnage channels on the satellite tuner . 5 GUIDE Use to turn the program information screen on or off.
57 OPERA TION 1 Press to switch the cassette deck on or off (not possible with all models). 2 1 Press to rewind the tape. 3 7 Press to stop playback or recording. 4 2 Press to start reverse playback (for auto reverse decks). 5 3 Press to start playback of the side of the cassette which has been loaded as the front.
58 Other screen for preset operations In addition to the operations mentioned in this section up to this point, the VSX-29TX is equipped with remote control screens to deal with a variety of cutting edge technologies and components that may or may not have appeared on the market yet.
59 SET UP OPERA TION OPERA TION Recording from Audio Components The following explanations show you how to record an analog or digital audio signal. Note that your analog components cannot record a player that is only connected digitally (and vice-versa).
60 Multi Operations Multi operations allow you to tell the receiver and your other components to do a number of things with the push of only two buttons on the LCD commander . For example, you can program the unit to turn on your TV , turn on your DVD player and start playing the loaded DVD.
61 SET UP OPERA TION OPERA TION Using Other Functions 6 Select a command from the screen of the component (for example 3 [play]). The command and component chosen will appear in the window of command 1. T o erase a command Press the command button you want to erase and press the CLEAR button T o go back one step Press the EXIT button.
62 System OFF The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and turn off with the push of only one button on the LCD commander . For example, you can program the unit to stop your DVD, turn off your TV , turn off your DVD player and turn off the receiver itself.
63 SET UP OPERA TION OPERA TION 6 Select a stop or a power ( ) command. The command and component chosen will appear in the window of command 1. T o erase a command Press the command button you want to erase and press the CLEAR button T o go back one step Press the EXIT button.
64 Using Other Functions Setting up the direct function The direct function will not be necessary for most users. It is designed in case you have an external video source connected to your TV (a video source that is not going through the VSX-29TX). For this explanation we'll call this the "external video deck.
65 SET UP OPERA TION OPERA TION Using Other Functions Multi-Room When used together with an optional IR receiver , this receiver is capable of outputting two different sources at the same time. One to the (main) VIDEO OUT jack and SPEAKERS terminals and another to the MUL TI ROOM AUDIO and VIDEO OUT jacks.
66 Using Other Functions 1 T urn on the receiver , your TV and press RECEIVER on the remote control. Make sure your TV is set to the receiver . 2 Press SUB on the receiver screen. 3 Press the SYSTEM SETUP button. The SYSTEM SETUP MENU appears on your remote control screen.
67 SET UP OPERA TION OPERA TION Using the front panel with the MUL TI-ROOM system 1 Press the MUL TI ROOM & SOURCE button. The display shown below will illuminate when the receiver is in ST ANDBY mode. Also, the MR&S button will light. 2 Press the CONTROL button.
68 Using the remote control with the MUL TI-ROOM system 1 From the sub room, point the remote control at the MUL TI ROOM sensor and press a MUL TI CONTROL button to select the sub function. For example, Press TUNER to listen to the tuner . The MUL TI ROOM & SOURCE button will light on the front panel in the main room.
69 SET UP OPERA TION OPERA TION Using Other Functions • Y ou can also control PIONEER components (and those made by other manufacturers) by pointing the receiver's remote control directly at the respective component. This type of operation does not require control cords.
70 T echno T idbits & Problem-solving Dolby Digital Dolby Digital is a compression format which records the sound of 6 channels of the theater surround system (Dolby Digital) on the movie film digital track.
71 T echno T idbits & Problem-solving DTS DTS has been adopted as a sound recording format in the latest movie theaters since the release of “JURASSIC P ARK” in 1993, and has a good reputation for high quality sound and dynamic surround effects.
72 T echno T idbits & Problem-solving T roubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below . Sometimes the trouble may lie in another component.
73 T echno T idbits & Problem-solving Cause • Speaker settings are incorrect. • The rear and/or center levels are turned down. • The surround and/or center speakers are disconnected. • SIGNAL SELECT is set incorrectly . • The digital inputs are assigned incorrectly , or not at all.
74 T echno T idbits & Problem-solving Specifications Continuous average power output of 120 watts* per channel, min., at 6 ohms, from 20 Hz to 20,000 Hz with no more than 0.09 %** total harmonic distortion (front). Continuous Power Output Front ..
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company , or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below .
We Want You LISTENING For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment.
デバイスPioneer VSX-29TXの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pioneer VSX-29TXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer VSX-29TXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer VSX-29TXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer VSX-29TXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer VSX-29TXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer VSX-29TXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer VSX-29TXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer VSX-29TXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
