PlanarメーカーC67RPの使用説明書/サービス説明書
ページ先へ移動 of 20
c50RP/c67RP , c50RX/c67RX Quick St ar t Guide 020-0629-00A This guide walks you through the basic setup needed to get your new Planar displays up an d running. Detailed information is contained in the Installation & Configuration Guide, which is in a CD-ROM on the back of this guide.
Product and Saf ety Inf orm ation The c50RP/c67RP , c50RX/c67R X are a family of digital moni- tors with a 50" (c50 RP or c50RX) or 67" (c67RP or c67RX) diag- onal screen size. The c50RP/c67RP is an SX GA+ format, with a 1400 x 1050 resolution.
2 Planning for Y our Inst all Planning f or Y our Inst allation Before y ou unpack your displays, you should hav e a detailed plan of how the displays are to be c onfigured.
3 Checking Accessories Checking Accessories Accessories Wi th Each Display Check for the follo wing items included in your acc e ssor y box: • This guide and the Installation & Configuration Gui.
4 Inst alling the Option Key Inst alling the Option K ey The Option ke y for Planar’ s Big Pictur e TM and/or for SiF i is shipped separately and installed on site . The Option ke y can be installed without removing the contr ol board. 1 Attach a ground strap to your wrist and the chassis.
5 Inst alling the VIM Inst alling the Video Input Module (VIM) The optional VIM is shipped sepa rately and installed on site. WA R N I N G ! Always turn off power and remove the pow er cord when adding or removing an electronic part. Remo ving the Control Board 1 Attach a ground strap to your wrist and the chassis .
6 W all & T ow er Inst allation W all, T o w er or Bann er Inst allation Inst alling the F irst or Bottom Ro w Note: Detailed instructions for wall, tow er or banner installation can be found on the Installation & Configuration Guide CD . 1 Unpack the displays for the bottom row only .
7 Releasing the Optical Engine Releasing the Optical Engin e The c50R/c67 R is shipped with the optical eng ine in a locked- down position. Y ou must release it and put it in the operation position before you can align the image to the screen. Y ou no r- mally do this before you install the c50R/c67R in a wall.
8 Inst alling Screens Inst alling Screens 1 Using t wo people, remov e th e screen from the pack ing case. Grab near the corners as you lift the screen from the packing case. Note: W e suggest you save the screen packaging until the entire array is installed.
9 Connecti ng Source Cables Conn ecting Source Cables All cablin g for the c50R/c67R must be run through the rear of the display . Y ou can run cables as the ro ws go up or when the installation is complete.
10 Connect Po wer , T urn It On/Off Conn ecting P o w er , T urning It On/Off Each display may draw up to 2.0A at 115V or 1.0A at 230 V . F or countries outside of North America, it is the responsibility of the installer to pro vide the power supply cord cer tified for use in the destination country .
11 Using the Remote & Menus Using the Remote and Menus Using the Remote Control The remot e contr o l works much like a remote contro l for a T V or DVD player , but it does more. Among other things , it opens menus, changes values and moves the image.
12 Selecting a Source Selecting a Source In this guide, a source is any type of pic ture. It might be an ana- log computer image, a video pr ocessor , a VCR or DVD , or it might be a DVI picture from a computer . Selecting the Source Automatically 1 Press SOURCE on the remote.
13 Adjust Levels f or Analo g Sources Adjusting Le vels f or An alog Sources This page applies t o analog RGB (comp uter) pictures only . The levels are best adjusted semi-automa tically. F or analo g RGB pict ures, the levels for black and white var y from one computer to anot her , or from one video processor to another .
14 Adjusting Input Le vels & P osition Adjusting Input Le vels and P osition Adjusting Le vels f o r Video Sources Video sour ces are adjusted best if a color bar test pattern is availa ble from the video sourc e: the DVD or VCR player . If not, you will ha ve to adjust by eye and the “f eel” of the picture.
15 Color Ba lancing Color Balancing f or Multiple Displays Color balancing makes the individua l displays in an array show the same colors . Colors vary slightly from one displa y to the next, because of slight variations in the lamps and DLP engines.
16 T roublesh ooting T rou bleshooting Use the following troubleshooting tables to diagnose and resolv e common problems. Common On-Screen Codes If your scr een shows black or a test pa ttern Do This Result Explanation/F ur ther Action 1O n t h e r e m o t e , press MONITOR .
17 Changing a Lamp Changing a Lamp 1 Using the remote, turn off th e lamp and allow the cooling fans to stop (about one minute) bef ore proceeding . WA R N I N G ! Never remove a lamp that is still lit. Cau ti on : In the dual-lamp system, it is possib le to remove and replace the lamp that is not being used while the other lamp is on.
18 Changing an Air F ilter Changing an Air F ilter Changing an Air F ilter (Rear Access) The air filter is in the back of the unit below the power cord. 1 Using the remote, tur n off the lamp and a llow the cooling fans to stop (about one minute) before pr oceeding.
19 Conf ormity Declaration of Conf ormity Manufacturer's Name: Planar Systems, Inc. Manufact urer's Address: 1195 NW Compton Dr ive Beaverton, OR 97006 declares that the products Model Numbe.
デバイスPlanar C67RPの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Planar C67RPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPlanar C67RPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Planar C67RPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Planar C67RPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Planar C67RPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPlanar C67RPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Planar C67RPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPlanar C67RPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。