PlanarメーカーPLL2010Wの使用説明書/サービス説明書
ページ先へ移動 of 22
www .planar .c om USER'S GUIDE LED LCD Monitor PLL2010W.
Content Operation Instr uctions ......................................................................................................... .......................................... 1 Unpacking In structions ............................................
1 Operation Instructions Thank you for purchasing the PLL2010W LED LC D monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CER.
2 C OMMUNIQUE D’ A VERTISSEMENT DE LA FC C C ONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR M ODELES CERTIFIE P AR L A FC C ) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlemen ts de la FCC.
3 Unpacking Instructions Remove the LED LCD Monitor out of the packag e and take off the plastic bag and Po lystyrene Foam. Pull the base from Parallel ve rsus Panel to Vertical. Adjust the Panel between 0° leaning forward and 20° leaning backward.
4 C onsignes de sécurité Respectez tous les avertissements, les précautions et conseils d’en tretien recommandés dans ce manuel de l’utilisateur pour maximiser la durée de vie de votre appareil. A faire : Éteindre le produit av ant de le nettoyer.
5 Package Overview LED LCD Monitor Base Po we r Co rd VGA Signal Cable User ’ s Guide.
6 First Setup Install the stand base 1. La y the LED L CD Monito r flat on a table with the LED screen face down. T o prevent the monitor from being scr atched , put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, th e other hand attach the base to the stand .
7 Front View of the Product ① ② ③ ④⑤⑥ ① OSD Turn On/ Off ② Contrast/Brightness /Scroll Down/A djust Decrease ③ Picture Mode/Scroll Up/ A djust Increase ④ Confirm Select /I nput select/Auto adjust ⑤ LED Indicator ⑥ Power On/ Off * Hot keys Instruc tions please see “U sing the OSD Menu” on page 8.
8 Rear View of the Product ① ② ③ ① Power Input (+12V DC In) ② DVI Input (DVI 24 pin) ③ VGA Input (D-Sub 15 pin).
9 Quick Installation 1. Connect either VGA or DVI Source from th e monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the power cord to a properly grou nded AC outlet, th en to the monitor. 3. Power-ON computer and then POWER-ON the monitor.
10 Basic Operation and Calibration/Reset Instructions Before using the LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the front.
11 Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The LED LCD Monitor will show a “POWER BUTTO N LOCKED” message for 5~10 seconds and the message will disappear automatically.
12 Advanced Operation—OSD Menu You can use the OSD menu to adjust var ious settings for your LED LCD Monitor. Press the 1 button to di splay the OSD Menu, and use ▲ or ▼ to select the desired OSD menu.
13 NORMAL: Adds red to screen image for warmer white and richer red . WARM: Adds green to screen image for a darker color. USER COLOR: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2. Press ▲ or ▼ button to adjust selected color.
14 OSD POSITION: Press ▲ or ▼ button to select between horizontal and vertical OSD Position adjustment. HORIZONTAL POSITION: To horizontally adjust the OSD position. ▲ : move OSD to the right, ▼ : mo ve OSD to the left. VERTICAL POSITION: To vertically adjust the OSD position.
15 Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VE.
16 Technical Information Panel 19.5” TFT (wi th L ED bac kl igh t) Power Management On: 1 6 Watts (typical), 18 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution WXGA++ 1600 x 900 max. Vertic al Frequency 60Hz max.
17 Wall-Mount Installation Instructions Pr eparing T o Install The Optional W all Mount Arm (not included) This LED L CD M onitor can be at tached to a wall mounting arm you can purchase separat ely . T urn the power OFF then disconnect the cables from the LED L CD Monitor before per forming the procedur e below .
18 Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the LED LCD Monitor . Plug another electrical device into the power o utlet to verify that the outlet is supplying proper voltage.
19 Planar Support Cables and Accessories To find cables and accessories fo r your Planar monitor, touch sc reen or other Planar products visit our online store at www.
2014 P/N:2001171653T.
デバイスPlanar PLL2010Wの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Planar PLL2010Wをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPlanar PLL2010Wの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Planar PLL2010Wの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Planar PLL2010Wで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Planar PLL2010Wを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPlanar PLL2010Wの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Planar PLL2010Wに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPlanar PLL2010Wデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。