PlanarメーカーWS231の使用説明書/サービス説明書
ページ先へ移動 of 25
WS231.
User’s Manual i P REF ACE FCC Compliance Statement This device complies with part 1 5 of the FCC Rules. Op eration is subject to the following two condit ions: 1. this device ma y not cause harmful i nterference, and 2. this device must accept any interfere nce received, including interference that may cause undesi red operation.
User’s Manual ii CE mark for Class B ITE (Following European standard EN55022/1998; EN61000-3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product .
User’s Manual iii Important Safety Instructions Please read the following instructions carefully. This manual sho uld be retained for future use. 1. T o clean the LCD Monitor screen, first, make sure the Monitor is in the power of f mode. Unplug the Monit or from its power so urce befor e cleaning it.
User’s Manual iv T ABLE OF C ONTENTS PREFACE .................................................................................................................. I TABLE OF CO NTENTS ....................................................................
1 C HAPTER 1 The LCD Monitor Your new LCD Monitor! Your LCD Monitor has been designed to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of di splaying m ost standards, from 640 x 480 VGA to 1600 x 1200 UXGA. The digital control s located on the front panel all ow the user to easily adjust the Monito r’s display parameters.
User’s Manual 2 If you find that any of these it ems are mi ssing or appear da maged, contact your dealer immediately . Do not throw away the packin g material or shipping carton in case you need to ship or sto re the LCD Monitor in th e future.
User’s Manual 3 4. Power Button and Port Select Push the button to turn the M onitor ON or OFF (push and hold the button for 2 seconds to switch between Analog or Di gital input m ode). 5. Power-On Indicator This LED indicator lights when th e power is on.
User’s Manual 4 Adjusting the Viewing Angle Y our LCD Monitor is designed to allow you to adjust it to a comfortab le viewing angle. Please see Figur e 1-3 . Figure 1-3: Angle Settings Connecting AC Power Please refer to the following instructions fo r connecting AC power to the LCD Monitor .
User’s Manual 5 Figure 1-4: Connecting Power to the LCD Monitor Connecting Video 1. Turn off your PC and the LCD Monitor before connecti ng your LCD Monitor to the computer. 2. Connect one end of the VGA signal cable to the PC’s D-sub VGA port and the other end to the monitor VGA port.
User’s Manual 6 Figure 1-5: Connecting the LCD Monitor to the PC 3. If your PC has a graphic card with a 24-pin DVI connector, you m ay connect it with the Digital 24-p in DVI signal cable. 4. Make sure the signal cable head is securely connected to the VGA port of your PC.
7 C HAPTER 2 The Display Controls The LCD Monitor’s Display Controls The LCD Monitor features an intu itive, menu-driven, On-Screen Display (OSD). Y ou can access the OSD any time when the PC is powered on. If the PC is in a power saving mode, or is powered of f, the OSD is inaccessible.
User’s Manual 8 The submenus for each ar e further described below: Display Setting sub Menu Figure 2-2: The Display Setting sub Menu Description: • CONTRAST Contrast adjustment. • BRIGHTNESS Backlight brightness adjustment. • GRAPH/TEXT DOS 640x400 or 720x400 mode selection.
User’s Manual 9 Description: • SCALE Full Screen or native display selection. • CLOCK To adjust the pixel alignment of the display . • PHASE To adjust the display for focus and clarity . • H-POSITION Horizontal position adjustment. • V -POSITION V ertical position adjustment.
User’s Manual 10 Color temp. Sub Menu Figure 2-5: The Color temp. Menu Description: • 9300 CIE 9300 ° K color . • 6500 CIE 6500 ° K color . • R User color R-Sub contrast adjustment. • G User color G-Sub contrast adjustment. • B User color B-Sub contrast adjustment.
User’s Manual 11 Digital Input Mode (use 24 pin DVI port): Figure 2-6: The OSD Main Menu Main Menu Description: • DISPLA Y Display Setting parameters including Contrast, Brightness, Language, and Scale. • OSD-ADJUST OSD H-Position, OSD V -Position, Language, Information, Reset.
User’s Manual 12 Description: • CONTRAST Contrast adjustment. • BRIGHTNESS Backlight brightness adjustment. • LANGUAGE T o select different languages of OSD menu. • SCALE Full screen or native display selection. • EXIT OSD Adjust sub Menu Figure 2-8: The OSD Adjust sub Menu Description • H-POSITION OSD Horizontal position adjustment.
User’s Manual 13 (Analog mode) (Digital mode) Figure 2-9: When there is no input signal The hotkey descriptions Figure 2-10: The Hotkeys 1. Main Menu pop up /Auto-Adjust Hotkey Press this button to activate the OSD Main Menu. Press and hold this button for 2 seconds to activate the Auto Adjust feature.
14 A DDENDUM A Technical Information TFT LCD Monitor Specifications Model FMT2315U LCD Panel 23.1” UXGA Co n tr o l F unctions Power Softw are switch w ith LED indicator On-Screen Display (OSD) DISPLA Y --------------CONT RAST/BRIGHTNESS/AUDIO VOLUME /GRAPH.
15 Model FMT2315U Scanning Frequency H/V , Hz (Digital mode) 30-80kHz 56-85 P o we r Management M e e t s VESA DPMS Power Consumption (ON mode/OFF mode) 88W (max.)/5W (max.) (Measured from AC inlet) Dimensions WxHxD mm 568 x 570 x 240 Net Weight (Kg) Approx.
16 A PPENDIX B Supported Timing Timing for Model FMT2315U (UXGA Resolution) Ite m St andards Resolution Dot Clock (MHz) V ertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) Sync Polarity or composite sy nc (H/V) Operating Mode 1 NEC PC98 640x400 25.
17 Item St andards Resolution Dot Clock (MHz) V ertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) Sync Polarity or composite sync (H/V) Operating Mode 28 VESA 1280x960 108.0 60.0 60.0 +/+ A/D 29 VESA 1280x1024 108.0 60.02 63.98 +/+ A/D 30 VESA 1280x1024 127.
18 A PPENDIX C Troubleshooting Troubleshooting Procedures This LCD Monitor was pre-adjusted in the factor y with standard VGA timing. Due to output timing differences among various VGA cards, you may initiall y experience an unstable or unclear display when a new display mode or new VGA card is selected.
19 PROBLEM: There is no LCD Display If there is no display on the LCD, please perform the following steps: 1. Make sure that the pow er indicator on the LCD Mo nitor is lit, all connections are secure, and the system is running on the correct timi ng.
620050 72 10 0 2 /0 4.
デバイスPlanar WS231の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Planar WS231をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPlanar WS231の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Planar WS231の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Planar WS231で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Planar WS231を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPlanar WS231の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Planar WS231に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPlanar WS231デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
