PlanetメーカーWNL-U554Mの使用説明書/サービス説明書
ページ先へ移動 of 43
.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Copyright Copyright © 201 1 by PLANET T echnology Corp. All right s reserved. No p art of this publication may be reproduced, transmit.
PL ANET 802.11n Wi r e l e s s USB Ada pte r CE mark W arning This is a class B device, in a domestic environm ent; this pro duct may cause radio interference, in which case the user may be required to t ake adequate measures.
PL ANET 802.11n Wi r e l e s s USB Ada pte r CONT ENTS Chapter 1. Product Introduction .......................................................................................................... 5 1.1 Package content s .........
PL ANET 802.11n Wi r e l e s s USB Ada pte r Chapter 1. Product Introduction 1.1 Package content s The following items should be contained in the package: ¾ Wireless USB adapter .
PL ANET 802.11n Wi r e l e s s USB Ada pte r Chapter 2. Installation 2.1 Driver Inst allation 1. If you had ever inst alled other wireless adapters before, plea se uninstall the existed drive rs and utilities first. 2. The following inst allation is performed in Windows XP .
PL ANET 802.11n Wi r e l e s s USB Ada pte r Step 3. After the sof tware has been inst alled successfully , choose “ Y es, I w ant to rest art my computer no w. ” an d click “Finish” button to rest art your computer . Step 4.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Step 6. Choose “ Inst all the software automatically (Recommended) ”, and click “Next” button to install the driver .
PL ANET 802.11n Wi r e l e s s USB Ada pte r If the screen below appears during installation, please click “Continue Anywa y ” button to continue. Step 7. Once the installation is fini shed, click “Finish” button.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Left-click the new i con will launch PLANET 1 1n USB Wireless LAN Utility , and right-click the icon will show the quick menu of c onfiguration utility .
PL ANET 802.11n Wi r e l e s s USB Ada pte r Step 3. When the access point you’re looking for is on the list, lef t-click it and then double click it or click “ Add to Profile ”.
PL ANET 802.11n Wi r e l e s s USB Ada pte r All options in this page will be filled automatically according to the access poi nt you wish to add to profile. However , you can still modify any of them to meet your requirement. Profile name Y ou can give a name to this profile, so you can rem ember it s purpose easily .
PL ANET 802.11n Wi r e l e s s USB Ada pte r “P ASSPHRASE” you also need to sele ct the length of the key . The passphra se must be identical with the setting of wi reless access point you with to connect. Key index Select WEP key index.
PL ANET 802.11n Wi r e l e s s USB Ada pte r If you connected to an access point but the connection wa s dropped soon, please check securit y settings and re-ch eck pa ssword spelling.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Step 2. Check “ Windo w s Zero Config ” box. Step 3. There is message appeared indicati ng that you’ve been alre ady switched to Windows Zero Config mode. T o return to use PLANET wirel ess utility , uncheck “ Windows Zero Config ” box.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Step 5. Double click “ Net w ork Connections ”. ‐ 16 ‐ .
PL ANET 802.11n Wi r e l e s s USB Ada pte r Step 6. Right-click “ Wireless Network Connection ” (it may have a number as suf fix if you have more than one wireless net work adapter , please make sure you right-click the PLANET Wireless LAN 802.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Step 8. If the access point is pr otected by encry ption, you have to input its Network key or passphrase here.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Chapter 3. PLANET USB Wireless LAN Utility 3.1 Connection Profile Management If you need to connect to dif ferent wireless access point.
PL ANET 802.11n Wi r e l e s s USB Ada pte r 3.1.1 Add a new profile Y ou can setup the conne ction parameters for the specific wireless access point in advance.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Required parameters are as follows: Profile name Y ou can give a name to this profile, so you can rem ember it s purpose easily . It can be any phrase to help you remember . Network Name (SSID) The SSID (Service Set IDentifier , i.
PL ANET 802.11n Wi r e l e s s USB Ada pte r The passphra se must be identical with the setting of wi reless access point you with to connect. Key index Select WEP key index. For most of acce ss points you can select “1”, but please refer to the setting of the access point.
PL ANET 802.11n Wi r e l e s s USB Ada pte r 3.1.3 Edit an existing profile If you have added a profile before, and now you wish to change the setting s of the profile, you can use this function. Please select the profile from the list first, then click “ Edit ” button.
PL ANET 802.11n Wi r e l e s s USB Ada pte r 3.1.4 Make a copy of existing profile If you need to create a new profile which parameters are similar to any existing profile, you can make a copy of a specific profile and ed it the copy to save as a new profile.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Y ou’ll be prompted to input a new profile name. Please use an identical name that does not exist in the profile list.
PL ANET 802.11n Wi r e l e s s USB Ada pte r 3.2 General Information, S t atus, and Network St atistics The PLANET wireless utility provides the det a iled information about t he wireless connection you’re using.
PL ANET 802.11n Wi r e l e s s USB Ada pte r All general information like signal strengt h and link quality will be displayed here. The information is very useful when you encounter some problems in co nnecting to access point. If you wish to get a new IP address from DHCP server , you can click “ ReNew IP ” button.
PL ANET 802.11n Wi r e l e s s USB Ada pte r 3.2.3 Network Transmission Statistics T o view the statistical data of wirele ss adapter , click “ Sta ti s t i c s ” label, and th.
PL ANET 802.11n Wi r e l e s s USB Ada pte r All connection-related st atistics is displayed here. Y ou can click “ Reset ” button to reset the statistics of al l items back to 0.
PL ANET 802.11n Wi r e l e s s USB Ada pte r The descriptions of the function are listed as follow: Show T ray Icon Check this box to show an icon on syste m tray . Uncheck this box to hide it. Radio Of f Switch wireless radio off.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Step 2. Click “ Wi-Fi Protect Setup ” label. Step 3. Y ou can choose which WP S method to us e, PIN Input Config (PIN) or Push Button Config (PBC), and WPS-supported wireless access p oint must use the same method.
PL ANET 802.11n Wi r e l e s s USB Ada pte r If you select “ Ye s ”, a list of all WPS-supported AP nea rby will be displayed. Y ou can click “ Refresh ” button to rescan. Click an access point you want to connect and click “ Select ” button.
PL ANET 802.11n Wi r e l e s s USB Ada pte r 3.4.2 Push Button Config (PBC) This is the easiest way to est ablish secure co nnection by WPS, but if there’re more than one WPS-supported access poi nt usi ng Push-Button config, please use PIN Input Co nfig (PIN) instead.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Then a message window will appear: Please activate WPS function of wireless access point now , and the secure connection between wireless ada pter and the WPS-supported access p oint will be esta blished automatically .
PL ANET 802.11n Wi r e l e s s USB Ada pte r Chapter 4. Soft Access Point Excepting be a wireless client of other wirele ss acce ss points, the PLANET wireless adapter can also act as a wireless servi ce provider .
PL ANET 802.11n Wi r e l e s s USB Ada pte r It requires few second s to switch mode. After the mode switch is complete, the windo w of general information about sof tware access point will appear , includes SSID an d connected wirele ss clie nts.
PL ANET 802.11n Wi r e l e s s USB Ada pte r S tation mode icon: Access Point icon: 4.1.1 Configure SSID and Channel T o configure software Access Point, click “ Config ” button, and the “ Wireless Network Properties ” will be displayed.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Please note that Ad-Hoc mode is not available when the wireless a dapter is in Access Point mode. The se tup options are listed below: Network Name (SSID) Please input the SSID (the name used to identify this wireless access point) here.
PL ANET 802.11n Wi r e l e s s USB Ada pte r The setup items about wireless security are listed below: Network Authentication Select network aut hentication mode from dropdo wn menu. Data Encrypti on Select data encryption met hod from dropdown menu.
PL ANET 802.11n Wi r e l e s s USB Ada pte r 4.2 Advanced Settings Click “ Advanced ” label to setup a dvanced settings of sof tware access point. If you don’t know the meaning and affect s of these settings, please keep them as default.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Click “ Reset ” button to rese t the value of every item back to “0”. 4.4 Internet Connection Sharing (ICS) Y ou can assign a network adapter on your co mputer as the path for all wireless client s to get connected to Internet.
PL ANET 802.11n Wi r e l e s s USB Ada pte r Click “ Apply ” button to save changes (“ Apply ” button is grayed out when no changes are made in this label).
PLANET TECHNOLOGY CORPORA TION e-mail: sales@planet.com .tw http://www .planet.com.tw 10F ., No.96, Minquan Rd. , Xindian Dist., New T aipei City , T aiwan, R.O.C. T el:886-2-2219-9518 Fax:886- 2-2219-9528 EC Declaration of Conformity For the following equipment: *T ype of Product : 802.
デバイスPlanet WNL-U554Mの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Planet WNL-U554Mをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPlanet WNL-U554Mの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Planet WNL-U554Mの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Planet WNL-U554Mで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Planet WNL-U554Mを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPlanet WNL-U554Mの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Planet WNL-U554Mに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPlanet WNL-U554Mデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。