PolarメーカーRS400の使用説明書/サービス説明書
ページ先へ移動 of 54
Polar RS400 User Manual ENGLISH.
CONTENTS 1 . I N T R O D U C T I O N .................................................................................................................... 4 2 . R U N N I N G C O M P U T E R P A R T S ...................................................
L an gu ag e ....................................................................................................................... 2 8 S le ep ..........................................................................................................
1. INTRODUCTION Congratulations! Y ou have purchased a complete training system to tailor -fit your training needs. This user manual includes complete instructions on getting the most of your running computer . The latest version of this user manual can be downloaded at http://www .
2. RUNNING COMPUTER P ARTS 1. Polar RS400/RS800 Running Computer: The running computer displays and records your heart rate and other exercise data during exercise. 2. Polar WearLink® 31 transmitter (Polar RS400) or Polar W earLink® W .I.N.D. transmitter (Polar RS800): The transmitter sends the heart rate signal to the running computer .
3. GETTING ST ARTED Basic Settings Before exercising with your running computer , customize the basic settings. Enter as accurate data as possible to ensure correct performance feedback based on your personal metrics. T o adjust the data, use UP , DOWN and accept with OK .
Menu Structure ENGLISH Getting Started 7.
4. PREP ARE FOR TRAINING Wear the T ransmitter Wear the transmitter to measure heart rate. 1. Moisten the electrode areas of the strap under running water and make sure that they are well moistened. 2. Attach the connector to the strap. Position the connector's letter L to the word LEFT on the strap and snap the fastener .
Position the Polar S1 Foot Pod Install Foot Pod Battery Before using the foot pod* for the first time, insert the battery (included in the product package). 1. Undo the flap and detach the foot pod from the fork. 2. Remove the black top cover by lifting it with the front edge of the fork (see picture 1).
*Optional S1 foot pod required. Calibrate the Foot Pod Optional calibration of the foot pod improves accuracy of speed, pace, and distance* measurements.
Select Settings > Fe atures > Footpod > Calibr ate . Set the Calibr ation f actor and press OK . The foot pod is now calibrated. 2. After starting heart rate measurement and before exercise recording. In the time mode, select OK > Settings > Footpod > Calibr ate .
• OwnZone : Basic OwnZone-based exercise with moderate intensity . Suggested duration 45 minutes. The running computer is able to determine your individual aerobic (cardiovascular) heart rate zone automatically . This is called OwnZone. For further information, see Determine Y our OwnZone (page 18 ) .
• Time rs : Set timer for the zone (minutes and seconds) and press OK . Or • Distances *: Set distance for the zone and press OK . Or • Off : Set timers and distances* off and press OK . Once you have defined the first zone, Zone 1 OK is displayed.
5. TRAINING Start T raining Wear the transmitter and foot pod* as instructed. Make sure the foot pod is on, and that you have activated the foot pod in your running computer ( Settings > Fe atures > Footpod ). 1. Start heart rate measurement by pressing OK .
He art r ate view Speed*/Pace*/Calories Stopwatch Heart rate Stopwatch view Calories Speed/pace/ T ime Stopwatch Lap time view Zone pointer Heart rate Lap time Speed/pace view T arget zone Distance* S.
T ext on the display Symbol Explanation Calories Expended calories Distance* Distance run so far Speed/pace* Current speed/pace Zone pointe r (heart rate) T arget zone indicator with a heart symbol that moves left and right inside the zone limits. If the heart symbol is not visible and/or an alarm sounds, your heart rate is outside the target zone.
alarm function is on). Unlock the sport zone by pressing and holding OK again: Sport zone3 Unlocked is displayed. Using the software, you can also base ZoneLock on your speed/pace*. For further information, see software help. Zoom the Display Press and hold UP to zoom into the upper row , and DOWN to zoom into the middle row .
Determine Y our OwnZone For background information on Polar OwnZone®, see OwnZone T raining (page 43 ). Find your OwnZone in 1-5 minutes during a warm-up period by walking and jogging. Y ou should start exercising gently at a light intensity and gradually increase intensity to raise your heart rate.
6. AFTER TRAINING Stop Recording Pause exercise recording by pressing STOP . T o stop recording completely , press STOP again. Care for your transmitter after exercise. Detach the connector from the strap after use. Keep the transmitter dry and clean.
b. Sport zones Select File > Exe rcise log > Sport zones c. Phases Select File > Exe rcise log > Phases d. Laps Select File > Exe rcise log > Laps a.
Calories expended during exercise. Energy expenditure indicates overall exertion during exercise. Running Index T o get a Running Index value, there are requirements your exercise has to fulfil. For further information, see Polar Running Index (page 44 ) .
The Phases menu is displayed only if the exercise is created with the software, and includes phases. In the Sport zones information view , press DOWN to view Phases information. Y ou can view each phase separately . Scroll data of an individual phase by pressing OK .
Number of recorded laps Average lap time Best (fastest) lap number alternating with its time The last lap is never shown as the best lap, even if it is the fastest lap. If you are in a running event and wish to include your last lap, press OK on the finishing line instead of STOP .
Select the week with OK to see the week’ s total calories, distance,* and exercise time. Press DOWN to see week’ s sport zones. T o see time spent in each sport zone, press OK and scroll the sport zones UP or DOWN . T otals Select File > Totals Totals includes cumulative information recorded during training sessions since the last reset.
7. SETTINGS Feature Settings Foot Pod* The running computer offers you the option of measuring speed/pace and distance data with a foot pod*. Change the settings of your foot pod* in the Footpod menu.
Select Settings > Fe atures > Shoes 1 / Shoes 2 T o follow and compare the usage of different shoes, the running computer can store the running distance* for different pairs. Rename your shoes Select Settings > Fe atures > Shoes 1 / Shoes 2 > Rename T ype the name with UP , DOWN and OK .
automatically . Press and hold LIGHT to switch between sport zone views: HR% (percentage of maximum heart rate) or BPM (beats per minute). Y ou can change settings easily by using the software. For further information, see software help. *Optional S1 foot pod required.
exact clinically-tested VO 2max , set the value in the running computer . Otherwise, measure a comparable value, OwnIndex, by taking the Polar Fitness T est. For further information, see Polar Fitness T est. If changes are made to the user settings, Use r settings updated is displayed.
• Yes : the running computer is activated. • No : the running computer returns to sleep mode. Y ou can change settings easily by using the software.
Select Settings > Watch > Alarm > Off / Once / Mon-Fri / Daily Y ou can set the alarm to go off once everyday between Monday and Friday , or daily . The alarm sounds in all modes except in exercise mode, and will do so for a minute unless you press STOP .
Shortcut Button (Quick Menu) Some settings can be changed with a shortcut button in time mode. Press and hold LIGHT > Quick menu • Keylock • Reminde rs • Alarm • Time zone • Sleep For further information, see ???.
8. TRAINING PROGRAM View Program Y ou can create and download a personalized training program to your running computer by using Polar ProT rainer 5. This chapter includes the basic instructions on how to navigate and manage the program once you have downloaded it to your running computer .
The day view offers an overview of your daily exercises. The white bar represents planned exercise time and the black bar represents performed exercise time. Daily target exercise time is shown below the bars. Press and hold LIGHT to view additional information on the day: • Targets : Summary of targets for the day .
Every phase starts with a display showing: Phase name Zone type Zone limits Number of phase repeats left During exercise the phase display shows: Countdown timer/distance*, countup timer , number of c.
9. TESTS Polar Fitness T est TM The Polar Fitness T est TM is an easy , safe, and quick way to measure your aerobic (cardiovascular) fitness at rest. The result, Polar OwnIndex, is comparable to maximal oxygen uptake (VO 2max ), which is commonly used to evaluate aerobic fitness.
Performing the T est Select Test > Fitness > Start > Fitness Test Lie Down The fitness test begins in five seconds. Arrows indicate that the test is ongoing.
Age / Years Very low Low Fair Moderate Good Very good Elite 55-59 < 22 22-26 27-30 31-34 35-39 40-43 > 43 60-65 < 21 21-24 25-28 29-32 33-36 37-40 > 40 W omen Age / Years Very low Low Fair.
Polar OwnOptimizer TM General Successful training requires temporary overloading: longer exercise duration, higher intensity , or higher total volume. In order to avoid severe overtraining, overloading must always be followed by an adequate recovery period.
After 3 minutes, the wrist unit will beep and Optimize r Stand up is displayed. Stand up and remain standing still for 3 minutes. After 3 minutes, the wrist unit will beep again and the test is finished. A numerical and written interpretation of the result is displayed.
have a complete recovery period. The longer you have trained intensively , the longer the recovery period required to recover . Perform the test again after at least two days of recovery .
Downloading test results to the software offers you the possibility of analyzing results in various ways, as well as accessing more detailed information about your progress. The software also allows you to make graphical comparisons with previous results.
10. BACKGROUND INFORMA TION Polar sport zones Polar sport zones introduce a new level of effectiveness in heart rate-based training. T raining is divided into five sport zones based on percentages of maximum heart rate. With sport zones, you can easily select and monitor training intensities.
Aerobic power is enhanced in sport zone 3 . The training intensity is higher than in sport zones 1 and 2, but still mainly aerobic. T raining in sport zone 3 may , for example, consist of intervals followed by recovery . Running in this zone is especially effective for improving the efficiency of blood circulation in the heart and skeletal muscles.
that the method is not very accurate, especially for older persons or those who have been fit for many years. If you have done some hard training in recent weeks and know that you can safely reach maximum heart rate, you can safely take a test to determine your HR max yourself.
Short-term analysis Men Age / Years Very low Low Fair Moderate Good Very good Elite 20-24 < 32 32-37 38-43 44-50 51-56 57-62 > 62 25-29 < 31 31-35 36-42 43-48 49-53 54-59 > 59 30-34 < 2.
Running Index Cooper test (m) 5 km (h:mm:ss) 10 km (h:mm:ss) 21.098 km (h:mm:ss) 42.195 km (h:mm:ss) 36 1800 0:36:20 1:15:10 2:48:00 5:43:00 38 1900 0:34:20 1:10:50 2:38:00 5:24:00 40 2000 0:32:20 1:0.
11. CUSTOMER SERVICE INFORMA TION Care and Maintenance Caring of Y our Product Like any electronic device, the Polar running computer should be treated with care. The suggestions below will help you fulfill guarantee obligations and enjoy this product for many years to come.
move away from possible sources of disturbance. Exercise equipment with electronic or electrical components such as LED displays, motors and electrical brakes may cause interfering stray signals. T o solve these problems, try the following: 1. Remove the transmitter from your chest and use the exercise equipment as you would normally .
Note that in addition to exercise intensity , medications for heart conditions, blood pressure, psychological conditions, asthma, breathing, etc., as well as some energy drinks, alcohol, and nicotine may also affect heart rate. It is important to be sensitive to your body’ s responses during exercise.
T ransmitter Battery life of WearLink 31 transmitter: Average 2 years (1h/day , 7 days/week) Battery type: CR2025 Battery sealing ring: O-ring 20.0 x 1.
The low battery indicator is usually the first sign of an expired battery . However , in cold conditions the low battery indicator may appear . The indicator will disappear as soon as you return to a normal temperature. When the symbol appears, the running computer sounds and backlight are automatically deactivated.
moving the running computer sideways. ... Footpod calibr ation f ailed is displayed?* Calibration did not succeed and you need to re-calibrate. Calibration fails if you move during the process. Once you reach lap distance, stop running and stand still for calibration.
permission of Polar Electro Oy . The names and logos marked with a ™ symbol in this user manual or in the package of this product are trademarks of Polar Electro Oy .
INDEX 1 2 h / 2 4 h t i m e m o d e ............................................ 3 0 A . L a p o n / o f f .................................................... 2 6 A c t i v i t y l e v e l .................................................... 2 7 A l a r m s e t t i n g .
デバイスPolar RS400の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Polar RS400をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPolar RS400の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Polar RS400の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Polar RS400で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Polar RS400を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPolar RS400の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Polar RS400に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPolar RS400デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。