Polycomメーカー3725-24004-001/Aの使用説明書/サービス説明書
ページ先へ移動 of 52
VideoV oiceDataW eb User’ s Guide for the Polycom PowerCam Presenter November 2006 Edition 3725-24004-001/A.
Trademark Informati on Polycom® and the Polycom logo design are registered tra demarks of Polycom, Inc. Po lycom PowerC am Presente r™ and VSX™ are trademarks of Polycom, Inc. in the United States and various other countries. All other brand and product names are trademarks or re gistered tra demarks of their respective companies.
iii About this Guide This guide introduces you to the Polycom® PowerCam Presenter ™ , explains how to configure the system, describes how to use automatic camera tracking and other functions, and provides maintenance and trouble shooting information.
User’ s Guide for the Polycom PowerCam Presenter iv.
v Contents 1 Introducing the Polycom PowerCam Pres enter . . . . . . . . . . . . . . 1-1 System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Key Features . . . . . . . . . . . . . . . . . . . .
User’ s Guide for the Polycom PowerCam Presenter vi 3 Maintenance and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 3-1 Maintaining the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Charging the Locator Pack Batteries .
1 - 1 1 Introducing the Polycom PowerCam Presenter The Polycom PowerCam Presenter is an automatic camera tracking device. Its primary components include a camera, a locator pack assembly, a controller, and a remote control.
User’ s Guide for the Polycom PowerCam Presenter 1 - 2 System Components These standard components come with the Polycom PowerCam Presenter: Name Component Description Controller The controller receiv es ultrasoun d signals from the camera.
Introducing the Polycom PowerCam Pr esenter 1 - 3 Camera (NTSC or PAL version) The camera has seve ral main functions: • Provides an S-video (P AL or NTSC) or composite video signal. • Points the camera head in response to commands from the controller to change the pan, tilt, or zoom.
User’ s Guide for the Polycom PowerCam Presenter 1 - 4 S-video cables In a configuration where you are not usi ng a VSX video conferencing system, the 2 5-foot S-video cable enables you to connect optional S-video devices, such as a VCR, DVD recorder, or a video conferencing system other than a Polyc om VSX system.
Introducing the Polycom PowerCam Pr esenter 1 - 5 You may also add optional components to y our PowerCam Pres enter. For example, you can add: • A Polycom VSX video conferencing system • A (non-VS.
User’ s Guide for the Polycom PowerCam Presenter 1 - 6 Key Features This section lists the key features of the Polyco m PowerCam Presenter. Ease of Use • Fluid camera movement that follows the pre senter's walking speed and smoothly stops moving when the presenter stops walking.
2 - 1 2 Using the Polycom PowerCam Presenter This chapter provides guidelin es for setting up the hardware, describes the remote control, and explains how to configure the Polycom PowerCam Presenter.
User’ s Guide for the Polycom PowerCam Presenter 2 - 2 • You can connect a display to connecto r on the controller using S-video or composite; however, be sure to use whichever matches the display’s video input. • Polycom recommends that you do not use audio with the display connected to connector on the controller.
Using the Polycom PowerCam Presenter 2 - 3 Keep in mind that the Tight , Wide , Left , and Right button settings described here are merely guid elines, and that you can set and change the settings to best suit your needs. For more infor mation, refer to Setting and Using Pres enter View s on page 2-12 .
User’ s Guide for the Polycom PowerCam Presenter 2 - 4 Configuring the Camera T racking Area The camera tracking area is the area within which automatic camer a tracking will follow the locator.
Using the Polycom PowerCam Presenter 2 - 5 3. In the Tracking Area field , select Restricted , Unrestricted , or Not Specified . Refer to the following table for help in determining which setting is best for your situation: Restricted Unrestricted Not Specifi ed Setup Requires you to set up the tracking area.
User’ s Guide for the Polycom PowerCam Presenter 2 - 6 4. If you selected Unrestricted or Restricted , press Next to access the Tracking Area screen. If you previously set a tr acking area, the camera’s pan and tilt measurements for that tracking area appear on the screen.
Using the Polycom PowerCam Presenter 2 - 7 6. Follow the directions on the screen, and pr ess Set . 7. Continue following the on-screen dire ctions until you have specif ied the complete camera tracking area.
User’ s Guide for the Polycom PowerCam Presenter 2 - 8 Configuring LAN Proper ties If you want to connect the PowerCam Pre senter to the LAN, you must configure the LAN properties. Note th at you cannot use the LAN connection to make video calls or view web pages.
Using the Polycom PowerCam Presenter 2 - 9 Configuring Video Output Settings The Video Output Settings screen lets yo u specify the video output signal from connector on the PowerCam Presenter controller. T o configure the video output settings: 1. Press Menu on the re m ote control.
User’ s Guide for the Polycom PowerCam Presenter 2 - 10 3. Configure these settings: Using Automatic Camera T racking Automatic camera tracking automatically points the camera to the person who is wearing the locator pack assembly.
Using the Polycom PowerCam Presenter 2 - 11 Enabling and Disabling Automatic Camera T racking Most of the time, you’ll wa nt to keep automatic trac king on so you can freely move about the room without having to manually adjust the ca mera. However, at times, you may want to m a nually pan, tilt, and zoom the camera.
User’ s Guide for the Polycom PowerCam Presenter 2 - 12 Setting and Using Presenter Views A Presenter View is a customized automatic camera tracking view.
Using the Polycom PowerCam Presenter 2 - 13 2. Do one of the following: — If you are planning to enable automatic zooming for the Presenter View, stand 20 feet (6 meters) to 30 f eet (9 meters ) from the camera. (If your room is smaller, you may have to stand closer.
User’ s Guide for the Polycom PowerCam Presenter 2 - 14 T o use a Presenter View: ¾ Press one of the Presenter View buttons: — Tight zooms in more closely on the presenter. — Wide zooms out further away fr om the presenter. — Left move s the camera to the left of the presenter.
Using the Polycom PowerCam Presenter 2 - 15 Controlling the Camera Manually If you do not want to use automatic ca mera tr acking, you can manually pan, tilt, and zoom the camera. You can manual ly adjust the camera at any time: it does not matter whether the locator pack is p owered on or powered off.
User’ s Guide for the Polycom PowerCam Presenter 2 - 16 T o use a camer a preset: ¾ Press Preset 1 or Preset 2 on the remote control to move the camera to the position you stored for that preset. If automatic camera tracking is on, it will turn off when you press Preset 1 or Preset 2 .
Using the Polycom PowerCam Presenter 2 - 17 • Place the camera so that: — It is no more than 50 feet (15 meters) and no closer than 5 feet (1½ meters) from the person wearing the locator pack assembly. — It is about 6 feet to 7 feet (2 me ters) above the floor, although higher will also work.
User’ s Guide for the Polycom PowerCam Presenter 2 - 18 — From greater than 35 feet (11 meters) away from the camera, you can face the camera or turn slightly from side- t o-side as l ong as the locator faces no more than 45° away fr om the center of the camera.
3 - 1 3 Maintenance and T roubleshooting This chapter contains maintenance in formation for your Polycom PowerCam Presenter, including how and when to charge the locato r pack batteries, how to upgrade the software, and what the automatic camera tracking specifications are.
User’ s Guide for the Polycom PowerCam Presenter 3 - 2 When the battery pack is charging, the battery LED on the top of the locator pack lights up red. After ab out three hours, the battery pack will be full y charged and the battery LED will change to green.
Maintenance and T roubleshooting 3 - 3 The following table lists ad ditional auto matic camera tracking specifications for the camera: Specification Description Room size 50 feet by 50 feet (15 meters.
User’ s Guide for the Polycom PowerCam Presenter 3 - 4 T roubleshooting the System The following tables lists some common power, hardware, and camera movement problems and the steps you can take to resolve them.
Maintenance and T roubleshooting 3 - 5 The system does not respond to the remote control (cont.) Camera inputs and outputs are not connected correctly . Refer to the Setting up the Pol ycom PowerCam Presenter document, which you received with your system, for information on how to connect the camera correctly .
User’ s Guide for the Polycom PowerCam Presenter 3 - 6 Camera Movement Issues Symptom Problem Corrective Action The camera moves slowly Y ou connected or po wered on the camera after the controller was already powered on. Do the following: 1. Power off the contro ller and the camera.
Maintenance and T roubleshooting 3 - 7 Automatic camera tracking does not properly follow you Camera inputs and outputs are not connected correctly . Refer to the Setting up the Pol ycom PowerCam Presenter document, which you received with your system, for information on how to connect the camera correctly .
User’ s Guide for the Polycom PowerCam Presenter 3 - 8 Automatic camera tracking does not properly follow you (cont.) There is an obstruction between you and the camera. Remove objects, such as furniture, plants, and so on, that obstruct the line-of-sight between th e camera and the locator .
Maintenance and T roubleshooting 3 - 9 Contacting T echnical Suppor t To contact Polycom Technical Support, go to www.polycom.com/support . You can enter information about your sy stem and ask a question or describe your problem.
User’ s Guide for the Polycom PowerCam Presenter 3 - 10.
Safety and Regulator y Notices - 1 Safety and Regulator y Notices Important Safeguards Read and understand the following instructions be fore using the system: • Battery safety is important. Please read and understand the Safety Precautions for Lithium Ion Battery Packs listed in the following table before us ing the Polycom Po werCam Presenter .
User’ s Guide for the Polycom PowerCam Presenter Safety and Regulatory Notices - 2 W ARNING This product contains a lithium ion rechargeable battery pack. T o reduce the risk of fire or burns, do not disassemble, crush, puncture, short external con tacts, or dispose of in fi re or water .
Safety and Regulator y Notices Safety and Regulator y Notices - 3 Safety W arnings When Charging the Battery W ARNING 1. Be sure to follow the rules listed below whi le charging the battery . F ailure to do so may cause the battery to become hot, rupture, or ignite and cause serious injury .
User’ s Guide for the Polycom PowerCam Presenter Safety and Regulator y Notices - 4 License Restr ictions THE SOFTW ARE PROGRAMS CONT AI NED OR DESCRIBED HEREIN AR E CONFID ENTIAL INFO RMA TION AND PROPRIET ARY PRODUCTS OF POL Y COM, INC. OR ITS LICENSORS.
Safety and Regulator y Notices Safety and Regulator y Notices - 5 EXCLUSIONS. POLYCOM WILL NOT BE LIABLE UNDER THIS LIMITED WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR RESULTS FROM: • FAILURE TO FOLLOW POLYCOM'S INSTALLATION, OPERATION, OR MAINTENANCE INSTRUCTIONS.
User’ s Guide for the Polycom PowerCam Presenter Safety and Regulator y Notices - 6 Regulatory Notices WARNING This is a Class A product. In a domestic environment, th is product may cause radio in terference in whi ch case the user may be required to take adequate measures.
Safety and Regulator y Notices Safety and Regulator y Notices - 7 Konformitätserk lärung: Hiermit erklärt Polycom Ltd., dass der Polycom PowerCam Presenter die grundlegenden Anforderung en und sonstige maßgebliche Bestimmung en der Ri chtlinie 1999/5/EG erfüll t.
User’ s Guide for the Polycom PowerCam Presenter Safety and Regulator y Notices - 8 Special Safety Inst ructions Follow existing safety in structions and observe all safe guards as directed. Installation Instructions Installation must be performed in accordance with all relevant nati onal wiring rules.
Index – 1 Index A adapter male RCA to female S-video 1-4 S-video gender changer 1-4 S-video to RCA 1-4 audio, from lapel or lavaliere microphone 3-5 automatic camera tracking calibrating for pointin.
User’ s Guide for the Polycom PowerCam Presenter Index – 2 composite video 2-2 , 3-5 controller power cable 1-3 controller, description of 1-2 D default gateway 2-8 DNS servers 2- 8 documentation,.
Index Index – 3 Polycom web site for documentation 1-4 for support 3-9 power cable for camera 1-3 controller power cable 1-3 locator pack AC power charger and cord 1-2 powering on the system 3-4 tro.
User’ s Guide for the Polycom PowerCam Presenter Index – 4 W warranty information Safety and Regulatory Notices-4 web site 1-4 , 3-9 WINS resolution 2-9 WINS server 2-9 Z zooming, enabling and dis.
デバイスPolycom 3725-24004-001/Aの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Polycom 3725-24004-001/Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPolycom 3725-24004-001/Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Polycom 3725-24004-001/Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Polycom 3725-24004-001/Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Polycom 3725-24004-001/Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPolycom 3725-24004-001/Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Polycom 3725-24004-001/Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPolycom 3725-24004-001/Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
