PolycomメーカーIP 300の使用説明書/サービス説明書
ページ先へ移動 of 29
User Guide SoundP oint ® IP 300/301 SIP 1.5 .x USER GUIDE SoundPoint ® IP 300/301 SIP March 24, 2005.
Contents Introduction ............................................... 1 Par ts Lis t ................................................... 1 Installing SoundPoint ® IP 300/301 SIP .......... 2 Connecting Network and Power Source .......................
V oice Mail ............................................................................ 15 Distinctive Ringing / Call T reatmen t ..................................... 15 Phone Reboot ..................................................................
1 Thank you for choosing the SoundPoint ® IP 300/301 SIP . This unit provides b usi - ness telephony features and functions such as Multiple Call Appearances, Call Hold, T ransfer , and Conference ov er an IP network. In this User Guide you will find ev erything you need to quickly use your new phone.
2 Installing SoundPoint ® IP 300/301 SIP This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point ® IP 300/301 SIP phone. If you re- quire additional information or assistance with your new phone, please contact your system administrator .
3 Connecting the Handset and Optional Headset Attaching the Base (Optional) 1. Connect the short straight end of the phone cord to the handset and the corresponding longer straight end of the cord to the handset jack on the back of the phone. 2. Connect the headset (optional accessory) to the headset jack on the back of the phone.
4 1 3 5 4 6 8 7 9 0 * ABC 2 DEF MNO JK L G HI TU V WXYZ OPER PQRS H o ld Me nu R ed i a l D o N o t Di s t u r b 1 3 5 4 6 8 7 9 0 * ABC 2 DEF MNO JK L G HI TU V WXYZ OPER PQRS H o ld Me n u R ed i a .
5 F eature K ey Description H o l d D e l S e l 1 3 D E F 5 J K L 4 G H I 6 M N O 8 T U V 7 P Q RS 9 W X YZ 0 O P ER * # 2 A B C Ho ld De l Se l Me nu Me ssa ges D o N o t D i s t u r b ABC 2 1 DE F 3.
6 Using SoundPoint ® IP 300/301 SIP Placing a Call Using the Handset: 1. T o obtain dial tone, pick up the handset. 2. Dial the desired number , OR Dial by SIP URL or IP † address: • After obtaining dial tone press Name • Enter URL or IP (press * for “.
7 Ans wering a Call Using the Handset: Pick up the handset. Using Listen Mode: Press the Answer soft key or the line k ey ( ). Using the Headset: Pressing H o l d D e l S e l C o n f e r e n ce 1 3 D .
8 General Key Use T o navigate through menus and to enter data, these are useful tips: 1. Use and or the Next and Prev soft keys to scroll through lists.
9 Redial Ending a Call Press H o l d D e l S e l C o n f e r en ce 1 3 D EF 5 J KL 4 G HI 6 M NO 8 T UV 7 P QR S 9 W XY Z 0 O PE R * # 2 A BC H o l d D e l S e l D i r e c t or ie s S e r v i c es C a.
10 1. Press H o l d D e l S e l C o n f e r e n c e 1 3 D EF 5 J KL 4 G HI 6 M NO 8 T UV 7 P QR S 9 W XY Z 0 O PE R * # 2 A BC H o l d D e l S e l C o n f e r e n c e F o r w a r d T r a n s f e r C a.
1 1 Display Contrast T o adjust the contrast on the display to a comfortable lev el: 1. Press H o l d D e l S e l C o n f e r e n c e 1 3 D E F 5 J K L 4 G H I 6 M N O 8 T U V 7 P Q RS 9 W X YZ 0 O P .
12 Contact List In addition to a directory of missed, placed, or receiv ed calls, the phone can store a local directory of 200 or more contacts*. Users can add, delete, edit, dial, or search for any contact in this list through just a few k ey strokes.
13 T o remov e a Speed Dial entry: 1. Press H o l d D e l S e l C o n fe r e n c e 1 3 D E F 5 J K L 4 G H I 6 M N O 8 T U V 7 P Q RS 9 W X YZ 0 O P ER * # 2 A B C H o l d D e l S e l D i r ec t o r i.
14 Multiple Call Appear ances Each line on the phone can be configured to hav e one or more call appearances. More than one call appearance is useful if there is an activ e call and an incoming call arriv es on the same line. In the example sho wn, there is in an outbound call with Bob Smith.
15 V oice Mail * V oice Mail is an optional featur e configured on the server and may not be supported on your particular system. Contact your system adminis- trator to find out. † Scr een options may vary with server-based application. V oice Mail can be accessed with a single ke y press.
16 Phone Re boot Periodically , the phone may require a user reboot. Reasons for this include accepting a new configuration or ne w software. There are two ways to reboot the phone: ► Simultaneousl.
17 Presence / Status / Buddy Lists The phone combines interactiv e message services and status monitoring to comple- ment a traditional messaging application such as email. Liv e interaction within a pool of phones is possible by monitoring the “presence” of the parties in volv ed.
18 4. Choose W atcher List to see which phones are currently monitoring your status. Press the Block soft key to block a watcher . 5. Choose Blocked List to see which phones you hav e blocked from monitoring your status. Press the Unblock soft key to unblock a con- tact.
19 No Dial-T one V erify power is correctly applied to the SoundPoint ® IP 300/301 SIP phone: • Check that the display is illuminated. • Make sure the LAN cable is inserted properly at the rear of the phone (try unplugging and re-inserting the cable).
20 No Audio on Headset V erify correct connections: • Ensure the headset is plugged into the jack marked Headset at the rear of the phone. • Ensure the headset amplifier (if present) is turned on and/or the volume is correctly adjusted.
21 Modifications In accordance with Part 15 of the FCC Rules, the user is cautioned that any chang - es or modifications not expressly appro ved Par t 15 R ules This device is compliant with P art 15 of the FCC Rules. Operation is subject to the fol- lowing tw o conditions: 1.
22 Industr y Canada (IC) This Class [B] digital apparatus complies with Canadian ICES-003. Cet appar eil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CE and V CCI Mar k This SoundPoint ® IP 300/301 SIP is marked with the CE mark.
23 Polycom will not be liable under this limited warranty if its testing and exami - nation disclose that the alleged defect or malfunction in the product does not exist or results from: • Failure to follo w Polycom’ s installa - tion, operation, or maintenance instruc- tions.
24 OR ITS A UTHORIZED RESELLER HAS BEEN AD VISED OF THE POS - SIBILITY OF SUCH D AMA GES, AND LIMITS ITS LIABILITY T O REP AIR, REPLA CEMENT , OR REFUND OF THE PURCHASE PRICE P AID, A T POL Y - COM’S OPTION. THIS DISCLAIMER OF LIABILITY FOR D AMA GES WILL NO T BE AFFECTED IF ANY REMED Y PR O VIDED HEREIN SHALL F AIL OF ITS ESSENTIAL PURPOSE.
25 ITY , FITNESS FOR A P AR TICULAR PURPOSE AND NONINFRINGEMENT . IN NO EVENT SHALL THE A UTHORS OR COPYRIGHT HOLDERS BE LI- ABLE FOR ANY CLAIM, D AMA GES OR O THER LIABILITY , WHETHER IN AN A CTION OF CONTRA CT , TOR T OR O THER WISE, ARISING FR OM, OUT OF OR IN CONNECTION WITH THE SOFTW ARE OR THE USE OR O THER DEALINGS IN THE SOFTW ARE.
Polycom, Inc. 1565 Barber Lane Milpitas, CA 95035 ©2004 Polycom, Inc. All Rights Reserved. Polycom®, SoundPoint®, and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S. and various countries. All other trademarks are the property of their respective compainies.
デバイスPolycom IP 300の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Polycom IP 300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPolycom IP 300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Polycom IP 300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Polycom IP 300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Polycom IP 300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPolycom IP 300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Polycom IP 300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPolycom IP 300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
