PolycomメーカーRMX DOC2551Aの使用説明書/サービス説明書
ページ先へ移動 of 20
1 RMX™ 2000 Installation & Configuration Guide General Safety Precautions Follow these rules to ensure general safety: • Keep the area around the Polycom RMX™ 2000 unit clean and free of clutter and well ventilated.
2 If ISDN/PST N is installed i n your conferencing envi ronment, obtain the following information from your ISDN/PSTN Service Provider: • Switch Type, Line Coding and Framing, Numbering Plan and Num.
3 When the RMX is install ed for the first time, you must change the default IP addresses to your local network settin gs. This can be done by modifying the default settings in the USB key shipped with the unit using the LAN Config uration Utility and upload ing them to the RMX.
4 First Entry P ower-up 8 Insert the USB key with the modified IP addresses in the USB port on the back panel. 9 Power the RMX ON . The parameters in the la n.cfg file are uploaded from the USB key to the RMX’s memory and applied during th e power-up sequence.
5 Connecting to the MCU 1 Start the RMX Web Client application on the workstation by entering in the browser’s addre ss li ne the IP Address of the control unit as defined in the USB key in the format: http://<Control Unit IP Addr ess> and pressing Enter .
6 1 In the Fast Configuration Wizard - IP dialog box, define the following parameters: 2 Click Next . 3 In the Fast Configuration Wizard - Routes dialog box, enter the IP address of the defaul t router. 4 Click Next . 5 Enter the required DNS information in the dialog box.
7 6 Click the Next button. 7 In the Fast Configuration Wizard - Environment dialog box, select the IP Network Type: H.323 , SIP or H.323 & SIP . 8 Click Next .
8 11 Click Next . 12 If you selected H.3 23 only go to Step 15. Primary Gatekeeper IP Address or Name Enter either the gatekeeper ’s host name (if a DNS Server is used ) or IP address. MCU Prefix in Gatekeeper Enter the stri ng with which the MCU registers itself with t he gate keeper .
9 13 In the Fast Config uration Wizard - SIP dialog box, enter the following information: 14 Click the Next button. 15 Enter the required Secu rity information in the dial og box. Field Description SIP Server Select: • Sp ecify – to manually configure SIP servers.
10 16 Click the Save & Continue button. During the initia l RMX setup, if the system detects the presence of the RTM ISDN card, the ISDN /PSTN Network Service definition screens of the Fast Configuration Wizard are enabled. If there is no RTM ISDN card in the RM X or if you do not want to define an ISDN/PSTN Ne twork Service , go to Step 32 .
11 18 Click Next . 19 In the PRI Settings dialog box, define the following parameters: Span T ype Select the type of spans (ISDN/PSTN) lines, supplied by the service prov ider , that are co nnected to the RMX.
12 20 Click Next . 21 In the Span Definition dialog box, defin e the following parameters: Num Plan Select the type of signalin g (N umber Plan) from the list according to informati on given by the service provider . Default: ISDN Note: For E1 spans, this pa rameter is set by the system.
13 22 Click Next . The Phones dialog box opens. 23 To define dial-in number ranges click the Add button. 24 In the Add Phon e Number dialog box, define the first and the last numbers in the phone number range. 25 Click OK . The new range is added to the Dial-in Phone Numbers table.
14 The Spans dialog box opens displaying the following read-only fields: — ID – the connector on the ISDN RTM card (PRI1 to PRI12). — Slot – the MPM card that the ISDN RTM card is connected to (MPM 1 or MPM 2). — Service – the ISDN/PS TN Network Service to which the span is assigned.
15 32 In the Fast Configuration Wizard - System Flags dialog box, enter the following i nformation : These flags can be modified la ter, if required, via the Setup menu’s System Configuration option. For more information, see the RMX 2000/4000 Ad ministrator’s Guid e, "System Configuration” on page 17-5 .
16 33 Click Save & Close . The RMX confirms successful configuration. 34 In the Success Message box, click OK. 35 In the Reset Confirmation dialog box, click Yes. 36 In the Please wait for system reset message box, cli ck OK . 37 Refresh the browser periodically until the Login screen is displaye d.
17 User Definition The RMX is shipped with a defa ul t Administra tor user cal led POLYCOM. Once you have defined other authorized administrator users, it is recommended to remove the default user to prevent unauthorized users from logging into the system.
18 Selecting the RMX W eb Client Languages By default, the RMX Web Client interface i s displayed only i n English. However, the system administrator can c hoose the languages available for selection on the Login screen . To customize t he Multilin gual Sett ing: 1 On the RMX menu, click Set up > Multilin gual Setting .
19 For more information on ISDN Network Services, see the RM X 2000/ 4000 Administrator’s Guide , "ISDN/PSTN Netw ork Services” on page 12-43 .
20 ISDN/PSTN Participants ISDN and PSTN participants can c onnect to conferences and Meeting Rooms directly or via an Entry Qu eue by dialing one of the numbers (including the country and area co de if needed) assigned to the conference, Meeting Room or Entry Queue.
デバイスPolycom RMX DOC2551Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Polycom RMX DOC2551Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPolycom RMX DOC2551Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Polycom RMX DOC2551Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Polycom RMX DOC2551Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Polycom RMX DOC2551Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPolycom RMX DOC2551Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Polycom RMX DOC2551Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPolycom RMX DOC2551Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。