PolycomメーカーViewStation EXの使用説明書/サービス説明書
ページ先へ移動 of 224
ViewStation ® EX, ViewStation FX, and VS4000 API Guide VS4000 User’ s Guide April 2003 Edition Release 5.0 1725-10656- 004.
Trademark Information Polycom®, the Polycom logo design, and V i ewStation® ar e re gistered trademarks of Polycom Inc. ARENA™, Global Ma nagement System™, PathNavigator™, Po lycom OneDial™, and V isual Concert™ are tradem arks of Polycom, Inc.
© Polycom, Inc. 2003 i Contents .............. ............. ................ ................ ............. ................ ................ ... i What’s New in Release 5.0? ............... ................ ................. ................ ....
ViewStation EX, V iewStation FX, and VS4000 A PI Guide ii www .polycom.com callstate ............... ................ ............. ................ ................ ................ ... 31 camera ................... ................ ................ .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 iii gatewayprefix ................ ................ ............. ................ ................ ......... 67 gatewaysetup ................ ... ............. .............
ViewStation EX, V iewStation FX, and VS4000 A PI Guide iv www .polycom.com nearloop ................. ............. ................ ................ ............. ................ ... 107 netmeetingip .............. ................ ............. ...
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 v streammulticastip .......... ................ ............. ................ ................ ......... 140 streamrestoredefaults ............ .......... ...... ...........
ViewStation EX, V iewStation FX, and VS4000 A PI Guide vi www .polycom.com ISDN BRI Commands ......................... ................ ................ ............. ................ 174 isdnareacode ................ ................. ...............
© Polycom, Inc. 2003 1 Vi e w Stat i o n E X , Vi e w Stat i o n F X , and VS4000 API Guide This document describe s the CGI-based V iewS tation EX, ViewS tation FX, and VS4000 API ( Application Programming Interface). This API is a set of commands imple mented within the sh ell.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 2 www .polycom.com What’ s New in Release 5.0? The following table lists the major changes for Release 5.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 3 Accessing the API Interface Using T elnet T o star t a T elnet session from Windows: 1.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 4 www .polycom.com 1. Locate the RS-232 seri al cable (DB9-to-DB9 straight through). 2. Connect on e end of th e cable to the serial po rt of your PC. 3. Connect the other end to the RS-232 serial port on the back panel of the VS 4000 system .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 5 RS-232 Interface Information The following provides a dditional information about the V iewS tation EX, ViewS tation FX, and VS4000 systems’ RS-232 interface.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 6 www .polycom.com • Pass-Thru Mode to Pass- Thru Mode: Both endpoint s are set to Pass-Thru Mode. • Pass-Thru Mode to Control Mode : The near site is set to Pass-Thru Mode and the far si te is set to Control Mode.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 7 control the far site system, us ing the far site’s Command Line Interface. The following t able summarizes the port operation based on the RS-232 mode configured by ea ch endpoint.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 8 www .polycom.com RS-232 Serial Cable Pinout and Connections (ViewS t ation EX and FX) The RS-232 seria l cable has a 9-pi n DB-9 conn ector on one end and an 8-pin mini-DIN connector o n the other end.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 9 RS-232 Serial Cable Pinout and Connections (VS4000) The RS-232 serial cable has a 9-pin DB-9 connector on both ends. It is used to connect the VS4000 to a terminal or another communications device.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 10 www .polycom.com S t atus Display The call st atus can be displayed in a number of ways. The display call st atus command shows tab le of current calls.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 11 cs: call[0] chan[0] dialstr[95551212] state[BONDING] cs: call[0] chan[0] dialstr[95551212] state[COMPLETE] cs: call[0] c.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 12 www .polycom.com -> ->listen video ringing // there is an incoming call, auto answer is on ->cs: call[0] chan[0] dialstr[8005551212] .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 13 Synt ax Summary The following syntactic notation is used for the API shell con trol commands. Note All defined commands are case se nsitive. <x> A required par ameter .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 14 www .polycom.com If the string parameter contains a compound name or space s, use quotation marks, as in the following examples: gabpassword set "My FX Password" gabpassword set "111 222 333" {a.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 15 System Commands This section describes each she ll command and its parameters.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 16 www .polycom.com gatewaynumber set 123456789 gatewaynumber 123456789 restart system for changes to take effect.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 17 abk all abk letter <{a..z}> abk range <{a..b}> Description This command displays loca l Address Book entries. batch Displays a batch of 10 records. The maximu m number of batches that can be displayed is 59 .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 18 www .polycom.com Note This command cannot be accessed through the RS-232 port. set Sets the passwor d used for remote management of th e system if followed by the pa s s w o r d parameter . If you want to erase the current setting, omit the pas s w o r d paramete r .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 19 Examples advnetstats advnetstats 1 Sample Output call:1 tar:24k rar:24k tvr:64.3k rvr:104k tvru:63.8k rvru:114.6k tvfr:15.0 rvfr:15.0 vfe --- tapl:66 rapl:0 taj:46mS raj:40mS tvpl:122 rvpl:0 tvj:21mS rvj:60mS dc:--- rsid:Polycom_VS4000_5.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 20 www .polycom.com tmlpr T ransmit MLP rate (H.320 calls only) rvj Receive video jitter (H.323 calls only) rmlpr Receive MLP rate (H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 21 allowdialing <yes|no|get> Description This command enables or disable s the Allow Dialing option. yes Allows users to place calls. no Disables dialing. Y our system can only receive calls.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 22 www .polycom.com Example allowmixedcalls yes User Interface Screen Location System Info>Admin Setup>Video Network > Call Preferences: Allow H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 23 Example allowusersetup yes User Interface Screen Location System Info>Admin Setup>General Setu p (page 2-Next): Allow User Setup answer <phone|video> Description This command answers incoming video or POTS calls.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 24 www .polycom.com set Sets the call spee d threshold value. Requires a parame ter from <64|1 12|128|168|192|224|25 6|280| 320|336|38 4|392|448|512>. get Displays the current threshold value of the call.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 25 Example audioqualityg7221 set 256 User Interface Screen Location System Info> Admin Setup> Phone/Audio: Au dio Qua.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 26 www .polycom.com autodiscovernat <yes|no|get> Description This command enables or disable s the Auto Discover NA T option. yes Enables the option to automatically assign the W AN IP address that is used to place and receive calls outside the W AN.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 27 get Displays the current setting ( yes or no ). Example autoh323dialing yes User Interface Screen Location System Info> Admin Setup> LAN/H.323> H.323>Setup: Au to H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 28 www .polycom.com button <#|*|1|2|3|4| 5|6|7|8|9|0|auto| callhangup|camera|delete|directory|down|fa r| home|info|keyboard| left|lowbattery| .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 29 delete Not implemente d. directory T akes the user to the Address Book screen. down Sends the down key to the user interface (dow n arrow). far Sends the Far key to the user interfac e.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 30 www .polycom.com zoom+ Sends the Zo om in key to the user interface. zoom- Sends the Zo om out key to the user interface. Example 1 button up This command sends th e up arrow command to the user interface.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 31 callstate <register|unregister|get> Description This command registe rs the T elnet or RS-232 session to receive notifications about call state activities. register Registers the system to give notific ation of call activities.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 32 www .polycom.com camera <near|far|register|unregister> Subcommands camera near <{1..
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 33 near move lef t Near camera direction change (st art moving left). near move right Near cam era directio n change (s tart moving right) . near move up Near camera direction change (st art moving up).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 34 www .polycom.com far subcommands far 1..5 Select s a far camera as the main video source (Camera sou rce 1-5). far source Returns the number of th e camera source currently selected. far move zoom+ Far camera direction ch ange (start zooming in).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 35 Example 1 camera far 2 This command causes the re mote terminal to begin sending its camera 2. Example 2 camera far move left This command causes the fa r camera to start p anning to the left.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 36 www .polycom.com camera4ptz <yes|no|get> Description This command set s camera source 4 to pan-tilt-z oom mode. This command is specific to the VS4000 system. Note See the command camerainput on p age 37 to set your VS4000 camera source to S-video or co mposite mode.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 37 Example cameradirection normal User Interface Screen Location System Info> Admin Setup> Video/Camera>Camera s: .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 38 www .polycom.com Example 1 camerainput 1 s-video Example 2 camerainput 4 get Output to Example 2 camerainput 4 off User Interface Screen Locat.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 39 rel_chair Releases the chair . req_chair Requests th e chair . req_floor Request s the floor . req_term_name <term_no> Requests the terminal name for the terminal numbered term_no .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 40 www .polycom.com colorbar <on|off> Description This command turns the dia gnostic color bars on or off.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 41 Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 333”).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 42 www .polycom.com daylightsavings <yes|no|get> Description This command set s the Global Management System daylight savings time. yes Enables dayli ght savings ti me. no Disables daylight savings time.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 43 the curren t setting, om it the xxx.xxx.xxx.xxx par am et e r . get Displays the default gateway IP address. xxx.xxx.xxx.xxx Defa ult gateway IP address. Example defaultgateway set 192.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 44 www .polycom.com User Interface Screen Location System Info>Adm in Setup>LAN/H. 323>LAN/In tranet>LAN &Intranet: DHCP dial <.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 45 h323|h320|ip| isdn T ype of call. The p arameters ip and isdn are deprecated. phone Dials a POTS number . Requires the parame ter dialstring . dialstring V alid POTS directory number .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 46 www .polycom.com diffserv <set|get><{0..63}> diffserv set <{0..63}> diffserv get Description This command let s you enable the DiffServ option and specify a number that represent s a priority level for the T ype of Service (Quality of Service).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 47 Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 333”).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 48 www .polycom.com Ouput Hi, my name is: Jw_System Here is what I know about myself: Serial Number: xxxxx Brand: Polycom Software Version: Release 5.0 FX - 14 Mar 2003 Model: VSFX4 Network Interface: PRI_E1 MP Enabled: Yes H323 Enabled: Yes IP Address: 192.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 49 displayglobaladdre sses <yes|no|get> Description This command enables or disab les the display of global addresses in the system’s Address Book. yes Enables th e display of global addre sses.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 50 www .polycom.com User Interface Screen Location System Info>A dmin Setup>Video/ Cameras>Monitors>TV Monitors: Display Icons in a Call displayipext <yes|no|get> Description This command enables or disable s the display of the IP extension field .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 51 get Displays the current setting ( yes or no ). Example displayipisdninfo yes User Interface Screen Location System Info.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 52 www .polycom.com gmsurl 9 <empty> gmsurl 10 <empty> gmscontactperson <empty> gmscontactnumber <empty> gmscontactemail .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 53 Description This command is used to configur e DNS servers (up to 4 DNS servers can be configured). Af ter a change is made, the system prompts the user for restart. Note This option can only be set when DHCP is of f.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 54 www .polycom.com no Disables the option. get Displays the current setting ( on or off ). Example dynamicbandwidth yes User Interface Screen Location System Info>Adm in Setup>LAN/H. 323>QOS: Dynam ic Bandwidth e164ext <set|get> ["e.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 55 Response e164ext <empty> restart system for changes to take effe ct. Restart now? <y, n> User Interface Screen Location System Info>A dmin Setup>LAN /H.323>H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 56 www .polycom.com enablesnmp <yes |no|get> Description This command enables or disables the ability to take or send snapshots . This option is enabled by default. yes Enables the option. no Disables the option.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 57 User Interface Screen Location System Info>A dmin Setup>LAN /H.323>SNMP: Ena ble SNMP exit Description This command ends an API co mmand session.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 58 www .polycom.com farloop <on|off> Description This command turns the far -end loop on or off, when in a call.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 59 Examples farnametimedisplay set farnametimedisplay set 120 User Interface Screen Location System Info >User Setup: Far Site Name Display gabk batch <{0..59}> Description This command displays Global Address Book entries in batches.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 60 www .polycom.com pa s s w o r d Password used to access the GAB server . V a lid characters are: a through z (l ower and uppercase), -, _, @, /, ;, ,, .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 61 User Interface Screen Location System Info >User Setup>LAN/H. 323>Global Address>Server: Server IP Addr ess gatekeeperip <set|g et> ["xxx.xxx.xxx.xxx" ] gatekeeperip set [" xxx.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 62 www .polycom.com gatewayareacode <set|get> ["areacode"] gateway areacode set ["areacod e"] gateway areacode set gateway areacode get Description This command sets th e gatewa y area cod e.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 63 gatewaycountrycode <set|get > ["number"] gatewayc ountrycode set ["number"] gatewayc ountrycode set gatewaycountry code get Description This command sets the gateway country code.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 64 www .polycom.com gatewayext <set|get> ["gateway extension"] gatewayext set ["gatew ay extension"] gatewayext set gatewayext get Description This command set s the gateway extension number .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 65 gatewaynumber <set|get> ["number"] gatewaynumber set ["number"] gatewaynumber set gatewaynumber get Description This command set s the gateway number .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 66 www .polycom.com gatewaynumbertype <did|number+e xtension|get> Description This command specifies the Gateway Number T ype. It can be either Direct Inward D ial (DID) or Number + Ex tension.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 67 gatewayprefix <set|get>< " valid speed " > [ " value " ] gatewayprefix set <"v a.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 68 www .polycom.com Example gatewayprefix set 168 90 User Interface Screen Location System Info> Admin Setup> LAN/H.323> H.323>Gate way (page 2): Prefix gatewaysetup Description This command list s all the available speeds at once.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 69 gatewaysuffix <set|g et><"valid speed"> ["value"] gatewaysuffix set <"v alid spe.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 70 www .polycom.com Example gatewaysuffix set 192 11 User Interface Screen Location System Info> Admin Setup> LAN/H.323> H.323>Gate way (page 2): Suffix gendial [{0..9| #|*}] Description This command generates DTMF dialing tone s to POTS line.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 71 get screen Description This command retur ns the name of the current screen. It is intend ed to let the control panel p rogramme r know which screen the user interface is currently d isplaying.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 72 www .polycom.com Example gmscity set Paris User Interface Screen Location System Info> Admin Setup> LAN/H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 73 gmscontac tfax <set|g et> ["fax" ] gmscontactfax set ["fax"] gmscontactfax set gmscontactfax get Description This command sets the GM S contact fax information.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 74 www .polycom.com gmscontactnumber <set|get> [ "number"] gmscontactnumber set ["number"] gmscontactnumber set gmscontactnumber get Description This command sets the GMS cont act number information.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 75 gmscontactperson <s et|get> ["person"] gmscontactperson set ["person"] gmscontactperson set gmscontactperson get Description This command sets the GMS contact person information.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 76 www .polycom.com gmscountry <set|get> ["country"] gmscountry set ["country"] gmscountry set gmscountry get Description This command sets the GMS country information. set Sets the GMS country inform ation when followed by the country p arameter .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 77 gmsstate <set|get> ["state"] gmsstate set ["state"] gmsstate set gmsstate get Description This command set s the GMS state information. set Sets the GMS st ate information when followed by the st ate parameter .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 78 www .polycom.com gmstechsupport <set|get> ["tech support digits"] gmstechsupport set ["tech support digits"] gmstechsupport set gmstechsupport get Description This command set s the GMS technical support phone number information.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 79 gmsurl <set|get> <{1..10}> ["xxx.xxx.xxx.xxx "] gmsurl set <{1..1 0}> ["xxx.xxx.xxx.x xx"] gmsurl set <{1..10}> gmsurl get <{1.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 80 www .polycom.com User Interface Screen Location System Info> Admin Setup> LAN/H.323> Global Manag ement> Setup>Select Server URLs... graphicsmonitor <tv|fx vga|visualconcert|get> Description This command set s the graphics monitor .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 81 graphicsmonitorfxvga <on|off|get> Description This command enables or disable s the system’s VGA graphics monitor . on Enables the VGA monitor as the graphic s monitor .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 82 www .polycom.com off Disables the TV moni tor as the graph ics monitor . get Displays the current setting ( on or off ).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 83 h323name <set|get> ["H.323 name"] h323name set ["H. 323name"] h323name set h323name get Description This command sets the H.323 name. set Sets the H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 84 www .polycom.com hangup <phone|video> hangup phone hangup video [{1..3}] hangup video Description This command hangs up a telephone or video call. phone Hangs up the current a udio call. video Hangs up the current video call if no parameter from the range {1.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 85 all Displays detailed help for all commands. help Describes the various types of help described in this section. verbose Sets verbose mode: shows synt ax and help for commands.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 86 www .polycom.com Output to Example 2 (p artial) ! abk adminpassword advnetstats allowabkchanges allowdialing allowmixedcalls allowremotemon al.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 87 Output to Example 2 camera 2 hires No User Interface Screen Location System Info>Admin Setup>V ideo Cameras>Cameras: High Resolution Cameras history Description This command list s the last commands used in the current session.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 88 www .polycom.com hostname <set|get> ["hostname"] hostname set ["hostname"] hostname set hostname get Description This command set s the LAN host name.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 89 invalid characters ar e removed from the system name to obtain a valid LAN host name.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 90 www .polycom.com xxx.xxx.xxx.xxx IP ad dress of the system. Example ipaddress set 192.168.1.111 User Interface Screen Location System Info>A dmin Setup>LAN /H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 91 Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 333”). Example ipdialspeed get 168 Output ipdialspeed 168 off User Interface Screen Location System Info>A dmin Setup>LAN /H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 92 www .polycom.com ipstat Description This command output s the same information that is displayed on the LAN & Intranet and Advanced LAN Settings screens: LAN host name, WINS resolution, DHCP , IP address, DNS servers 1-4, default gateway , subnet mask, and WINS server .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 93 keypadaudioconf <yes |no|get> Description This command set s the keypad au dio confirmation. When this option is enabled, an audio response is echoed when a numeric key is depressed on the remote contr ol.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 94 www .polycom.com set Sets the command . It requires a parame ter from <englishus, englishuk, french, german, it alian, sp anish, japane se, chinese, portuguese, norwegian>. get Displays the current langua ge on the system.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 95 User Interface Screen Location System Info>A dmin Setup>LAN /H.323>LAN/In tranet> Advanced LAN Settings lanstat <min|misc|re set|sec|tmin|total> lanstat min lanstat min [{0.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 96 www .polycom.com 0..60 Maximum number of minutes that can be specified is 60. Example 1 lanstat min 1 Output to Example 1 lanstat: LAN statist.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 97 lanstat: Max tx iterations = 8 lanstat: Max rx iterations = 4 lanstat: Max interrupt iters = 3 lanstat: Total interrupts.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 98 www .polycom.com listen waking up Notification of event: the system is waking up. maxgabintern ationalcallspeed <set|g et> < " v.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 99 maxgabinternetcallspeed <set|get> < " valid speed " > maxgabinternetcallspeed get Description This command se ts the maximum speed fo r Internet (IP/H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 100 www .polycom.com maxgabisdncallspeed <set|get> < " valid speed " > maxgabisdncallspeed get Description This command set s the maximum speed for ISDN (H .320) calls made from the Global Address Book.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 101 maxtimeincall <set|get> [{0..99999}] maxtimeincall set [{0..99999}] maxtimeincall set maxtimeincall get Description This command set s the maximum number of minutes allowed for call length.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 102 www .polycom.com mcupassword [{ " password " }] mcupassword Description This command sends th e MCU password when the MCU prompt s system for an MCU password. The Meeting Password can be configured as the multipoint MCU conference p assword.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 103 meetingpassword <set|get> [ " password " ] meetingpassword set ["password"] meetingpassword set meetingpassword get Description This command set s the meeting password.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 104 www .polycom.com mpautoanswer <yes|no|dono tdisturb|get> Description This command set s the Auto Answer Multipoint mode which determines how the sys tem will handle an incoming call in a multipoint videoconferen ce.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 105 User Interface Screen Location System Info>Adm in Setup>Gener al Setup: Auto Answer Multip oint --or-- System Inf.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 106 www .polycom.com User Interface Screen Location System Info >User Setup: Multipo int Mode mute <near|far|re gister|unregister> mute near <on|off|toggle|get> mute far get mute register mute unregister Description This command sets the near or far site mute mode.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 107 muteautoanswercalls <yes|no|get> Description This command sets the system to Mute Auto Answe r Calls mode. When this option is selected, the micropho ne pod is turned off to prevent the far site from hearing the near site wh en the system is in Auto Answer mode.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 108 www .polycom.com off Disables the Ne ar End Loo p. Example nearloop on User Interface Screen Location System Info>Diagnostics>Near End Loop netmeetingi p <set|get> ["xxx.xxx .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 109 netstats [{0..2}] netstats Description This command is used to get network st atistics for each call. 0..2 Range of selectable calls in a multipoint call (maximum number of concurrent calls=3, wher e 0 is call #1, 1 is call #2, and 2 is call #3).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 110 www .polycom.com tcp transmit comm protocol rcp receive comm protocol User Interface Screen Location System Info>Dia gnostics>Netwo rk S tats numdigitsdid <{0..24}|get> numdigitsdid <{0.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 111 numdigitsext <{0..24}|get> numdigitsext <{0..24}> numdigitsext get Description This comman d sets the number of digits in the Num ber+Extensio n Gateway number (E.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 112 www .polycom.com numberofmonitors <{1..4}|get> numberofmonitors <{1..4}> numberofmonitors get Description This command set s the number of TV monitors that are co nnected to the system.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 113 Example outboundcallroute gateway User Interface Screen Location System Info>A dmin Setup>LAN /H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 114 www .polycom.com 100 100 Mbps auto duple x. 100hdx 100 Mbp s half duplex. 100fdx 100 Mbp s full duplex. get Displays the current setting. Example pcport 100fdx User Interface Screen Location System Info>A dmin Setup>LAN /H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 115 pip <on|off|auto|get> Description This command sets the on-screen PIP mode. The PIP feature allows the near site to adjust near-camer a views while in a videoconference.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 116 www .polycom.com switchnumber Sends th e Gateway Switch Number as the preferred alias. didextnumber Sends the DID Exte nsion Number as the preferred alias. extensio n Sends the H.323 Extension Number (E.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 117 This command set s the presets or goes to presets for the near or far camera source. It can also register or unregister the T elnet or RS-232 session to give notification when the use r sets or goes to presets.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 118 www .polycom.com ip Selects IP as the Primary Call T ype Choice. manual No call type is selected.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 119 queuecommands <yes|no|get> Description This command allows the system to que ue up commands that cannot be processed d uring call progress or p opup window states (that is, when the system is showing the call progress screen or is displaying a p opup window).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 120 www .polycom.com to the GAB, but does not app ear in the Global Address Bo ok of other systems. yes Enables this option (r egister this system). no Disables this option. get Displays the current setting ( yes or no ).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 121 requireacctnumtod ial <yes|no|get> Description This command enables or disa bles the Require Account Number to Dial option. It is used to log calls to a specific account so that they can be tracked and billed to the ap propriate departments.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 122 www .polycom.com roomphonenumber <set|get> ["room phone number"] roomphonenumber set ["room phone number"] roomphonenumber set roomphonenumber get Description This command let s you enter the numb er of the phone that is lo cated in the same room as the system.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 123 rs232<mode|flowcontrol|baud|> Subcommands rs232 mode <passthru|control|get> rs232 flowcontrol <none|hard.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 124 www .polycom.com User Interface Screen Location System Info>Admin Setup>Sof tware/Hardware>RS-232 run < " scriptfilename " > Description This comman d loads a file from the fl ash file system and then executes the API commands contained in it.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 125 speeddial Goes to the Speed Dial screen. disableui T urns of f the user interface. enableui Turns o n the user interface. chaircontrol Goes to the main Chair Control screen.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 126 www .polycom.com sendonlypreferredali as <yes|no|get> Description This command enables the optio n Send Only Preferred Alias. It allows you to select which E.164 alias to send to the gatekeeper .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 127 User Interface Screen Location System Info>Adm in Setup>Softwa re/Hardware>Software : System Serial Number setaccountnu mber < " account number " > Description This command set s the account number that is required for dialing out.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 128 www .polycom.com both Displays both ISDN and IP numbers in the GAB. get Displays the current setting ( h 320 , h323 , or both ). Example showaddrsingab both User Interface Screen Location System Info> Admin Setup> LAN/H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 129 sleep Description This command put s the system in sleep mode. T o wake the system, use the comma nd wake .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 130 www .polycom.com list List all loaded presentations (displays names and IP addresse s) available for viewing. T he names are the na mes of the PCs from whic h the present ations are loaded. select < " pres " > Selects slide presen tation pres from the list by name.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 131 3 Generates a snap shot from the near camera 3 (VCR). 4 Generates a snapshot from th e near camera 4 (auxiliary camera). register Registers the T elnet or RS-232 session to receive notifications about snap shots that are sent or received.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 132 www .polycom.com snapshottimeout <yes|no|get> Description This command enables or dis ables the Snapshot Timeout option. By default, all slides an d snapshots are displayed for a perio d of four minutes.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 133 snmpadmin <set|get > ["admin name"] snmpadmin set ["admin_name"] snmpadmin set snmpadmin get Description This command set s the SNMP administrator name.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 134 www .polycom.com snmpcommunity <set|get> ["community name"] snmpcommunity set ["community name"] snmpcommunity set snmpcommunity get Description This command sets the SNMP community name.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 135 snmpconsoleip <se t|get> ["xxx.xxx.xxx.xxx" ] snmpconsoleip set ["xx x.xxx.xxx.xxx "] snmpconsoleip set snmpconsoleip get Description This command sets the SNMP console IP address.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 136 www .polycom.com set Sets the SNMP location name when followed by the location na me paramet er . If you want to er ase the curren t setting, om it the paramete r . get Displays the current setting.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 137 User Interface Screen Location System Info>Adm in Setup>Phon e /Audio: Sound Effect s V olume (select the Soun d Effect s V olume field. Adjust the volume setting by using the volume control buttons on the remote control).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 138 www .polycom.com Note The Call T ype icon is only visible on the main user interfac e screen if you have previously enabled Allow S treaming (System Info>AdminSetup>LAN/H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 139 streamaudioport <set|get> [ " stream audio port " ] streamaudioport set ["stream audio port"] streamaudioport set streamaudioport get Description This command set s the stream audio port.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 140 www .polycom.com streamenable <yes|no| get> Description This command enables or disable s streaming on the system. yes Enables st reaming. no Disables stre aming. get Displays the current setting ( yes or no ).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 141 get Displays the current setting. ip address Multicast IP address. Example streammulticastip get User Interface Screen Location System Info> Admin Setup> LAN/H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 142 www .polycom.com streamrouterhops <set|get> [ " number router hops " ] streamrouterhops set ["number router hops"] streamrouterhops set streamrouterhops get Description This command set s the number of routers you want the streaming video to pass thro ugh.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 143 streamspeed <192|256|384|512|get> Description This command set s the speed of the video stream . 192 Sets the streamin g speed at 192 Kbps. 256 Sets the streamin g speed at 256 Kbps.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 144 www .polycom.com set Sets the stream video por t when followed by the video port parameter . If you want to erase the current setting, omit the parameter . get Displays the current setting. video port Vide o port number .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 145 systembehindnat <yes|no|get> Description This comman d sets the system behind a NA T (Network Addr ess T ranslation) device. Select this op tion if your system is behind a NA T device that is not H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 146 www .polycom.com systemna me <set| get> ["syst em name"] systemname set [ "system name"] systemname get Description This command set s the name of your system.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 147 t120nameip <set|get> [" name or ip"] t120nameip set ["name or ip"] t120nameip set t120nameip get Description This command set s the t120 data conference name or IP address.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 148 www .polycom.com tcpports <set|get> [{1024..49150}] tcpports set [{1024..49150}] tcpports set tcpports get Description This command set s the TCP ports for Quality of Service on your system.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 149 phone num Phone number at which the user want s to be contacted. In order to obt ain rapid assistance, include the ar ea code with your phone number .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 150 www .polycom.com Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 333”).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 151 telenumber <set |get> ["telephone number"] telenumber set ["telephone number"] telenumber set telenumber get Description This command sets the system’s telephone number .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 152 www .polycom.com testlan arp Description This command print s the ARP (Address Resolution Protocol) tab le contents. Example testlan arp testlan dcuinfo Description This command displays miscellaneous DC U information.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 153 testlan dns <name or ip> Description This command looks up a domain name or an IP address. name or ip Domain name or IP address. Example 1 testlan dns microsoft.com Output to Example 1 testlan: microsoft.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 154 www .polycom.com from [length|mp s|rep s|wait|echoport|locapo rt]. To print an echo message showing only the default settings, omit the parameter . length Message length in bytes. mp s Number of me ssages per second.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 155 testlan: waiting 100000us for next message testlan: sent=30, received=0, lost=30, delayed=0, corrupt=0 testlan: waiting.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 156 www .polycom.com textinput <"text to input"> Description This command inserts text into a user interface edit box that you have already selected using the remote control. text to input Alphanumeric string to be inserted into the selected edit box.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 157 User Interface Screen Location System Info> Admin Setup> LAN/H.323> Global Manag ement> Setup: Time Difference from GMT typeofservice <ipprece dence|diffserv|get> Description This command select s the type of service for Quality of Service .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 158 www .polycom.com Description This command sets the system’s UDP ports. set Sets the UDP port s when followed by a value from the range {1024..49150} . If y ou want to erase the c urrent setting, omit the value.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 159 usegatekeeper <off|specify| auto|get> Description This command select s the gatekeeper mo de ( off, specify or au to ). After a change, the user is promp ted for system restart.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 160 www .polycom.com usepathnavigator <always|never|required| get> Description This command selects the PathNavi gator™ mode, if PathNavigator is used with the system.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 161 User Interface Screen Location System Info> Admin Setup> LAN/H.323> H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 162 www .polycom.com validateacctnum <yes|no|get> Description This command set s the validation for the GMS a ccount number that is used when dialing out. When the ca ll connects, the system verifies that the accou nt exists with the Glob al Managemen t System (GMS ) server .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 163 register Registers the T elnet or RS-232 session to receive notifications about V isual Concert FX events. unregister Unregisters the T elnet or RS-232 session to re ceive notifications about V isual Concert FX events.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 164 www .polycom.com vcrrecordsource <aut o|near|f ar|get> Description This command sets the VCR record source. auto Enables the VCR to automati cally record the current speaker in a point -to-point call.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 165 User Interface Screen Location System Info: Sof tware V ersion vgahorizpos <left|right|get> Description This command is used to calibra te the VGA input in the horizontal position.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 166 www .polycom.com get Displays the current setting ( black or nosignal ) Example vgaoffmode nosignal User Interface Screen Location System Inf.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 167 vgaresolution <800x600|1024x768| 1280x1024|get> Description This command is used to set th e system’ s VGA output resolution. Select the maximum resolution that your monitor or projector can support.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 168 www .polycom.com down Moves the calibrati on frame down. get Displays the current setting ( up or do wn ).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 169 User Interface Screen Location Press the V olume UP or DOWN key on the remote control to see the audio level slider appear on scree n.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 170 www .polycom.com wake Description This command wakes the sys tem from sleep mode. T o put the system in sleep mode, use the command sleep . Example wake wanipaddress <set|get> ["xxx.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 171 whoami Description This command displays banner infor mation. Example display whoami Ouput Hi, my name is: Superman Here is what I know about myself: Serial Number: xxxxx Brand: Polycom Software Version: Release 5.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 172 www .polycom.com Note This option only works between Vi ewSt ation EX, ViewS tation FX, or VS4000 syste ms with software version 4.0 and higher . Otherwise, if one of the systems has a software version older tha n 4.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 173 winsserver <set|get > ["xxx.xxx.xxx.xxx"] winsserver set ["xxx.xxx.x xx.xxx"] winsserver set winsserver get Description This command sets the WINS serv er .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 174 www .polycom.com ISDN BRI Commands The following commands are sp ecif ic to the ISDN BRI network interface.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 175 isdncountrycode <set|get> ["country code"] isdncountrycode set ["country c ode"] isdncount rycode set isdncount rycode get Description This command set s the ISDN country code associated with the country where the system is used.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 176 www .polycom.com isdndialingprefix <set|g et> ["isdn prefix"] isdndialingprefix set ["isdn prefix"] isdndialingprefix set isdndialingprefix get Description This command sets the ISDN di aling prefix used to access an outside line if the system is behind a PBX.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 177 isdndialspeed <set|get> <"valid speed"> <on|off> isdndialspeed set <"valid speed&qu.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 178 www .polycom.com isdnnum <set|get><1b1|1b2|2b1|2b2|3b1| 3b2|4b1|4b2> ["isdn number"] isdnnum set <1b1|1b2|2b1 |2b2|3.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 179 spidnum <set|get><1b1|1b2|2b1|2b2|3b1| 3b2|4b1|4b2> ["spid number"] spidnum set <1b 1|1b2|2b1 .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 180 www .polycom.com ISDN PRI Commands The following commands are sp ecif ic to the ISDN PRI network interface. priareacode <set|get> [ " area code " ] priareacode set ["area code"] priareacode set priareacode get Description This command sets the PRI area code.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 181 pricallbycall <set|get> [{0..31}] pricallbycall set [{0..31}] pricallbycall set pricallbycall get Description This command sets the PRI area cod e.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 182 www .polycom.com prichannel <set|get> <all|{1..<23|30>}> <on|off> prichannel set all <on|off> prichannel set <{1..23}> <on|off> prichannel set <{1.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 183 Example 2 prichannel set Example 3 prichannel get 3 User Interface Screen Location System Info>A dmin Setup>Vid e.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 184 www .polycom.com 17-31. But the PRI Status scre en numbers these channels contiguously in the range 1- 30. Therefore, on the PRI S tatus screen, channels 1-15 control th e status of timeslots 1 -15, and channels 16-30 control th e status of timeslots 17 -31 .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 185 pridialchannels <set |get> <{1..12|15}> pridialchannels set <{1..12}> pridialchannels set <{1..15}> pridialchannels set pridialchannels get Description This command set s the number of PRI channels to dial in parallel.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 186 www .polycom.com priintlprefix <set|get> [ " prefix " ] priintlprefix set ["prefix"] priintlprefix set priintlprefix get Description This command set s the PRI international dialing prefix.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 187 prilinebuildout <set|get><0|-7.5|- 15|-22.5>| <0-133|134-266|267-399|400-533|534-665> prilinebuildout set <0|-7.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 188 www .polycom.com prilinesignal <set|get>< esf/b8zs|crc4/hdb3| hdb3> prilinesignal set <esf/b8zs|crc4/hdb3|hdb 3> prilinesignal get Description This command sets the PRI line signal.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 189 prinumber <set|get> [ " pri number " ] prinumber set ["pri number"] prinumber set prinumber get Description This command set s the PRI video number .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 190 www .polycom.com prinumberingplan <isdn| unknown|get> Description This command set s the PRI numbering plan.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 191 prioutsidelin e <set|get> [ " outside_line " ] prioutsideline set ["outside_line"] prioutsideline set prioutsideline get Description This command sets the PRI number th at is dialed f or outside line access.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 192 www .polycom.com priswitch <set|get> <att5ess|att4ess| norteldms|ni2|net5/ctr4> priswitch set <att5ess| att4ess|norteldms|ni2| net5/ctr4> priswitch get Description This command sets the PRI switch.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 193 V .35/RS-449/RS-530/RS-366 Commands The following commands are sp ecific to the V .35/RS-449/RS-530/ RS-366 networ k interfac e. cts <normal|inverted|get> Description This command let s you configure the cts serial interface control signal (clear to send).
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 194 www .polycom.com inverted Set s the signal to inverted (low volt age is logic 1). get Displays the current setting ( normal or inverted ). Example dcd inverted User Interface Screen Location System Info> Admin Setup> Video Network>Advanc ed V .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 195 dsr <normal|inverted|get> Description This command let s you configure the dsr serial interface contr ol signal (data set rea dy). The default setting for this signal is normal .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 196 www .polycom.com Example dsranswer on User Interface Screen Location System Info> Admin Setup> Video Network>Advanc ed V .3 5: DSR>Answer This screen is only accessible if you have a V .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 197 h331audiomode <g728|g711u|g711a|g722-56 | g722-48|off|get> Description This command set s the H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 198 www .polycom.com User Interface Screen Location System Info>Admin Setup>V ideo Network>Video Ne twork> Broadcast Mode Setup : Audio Mode This screen is only accessible if you have a V .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 199 h331videoprotocol <h263|h261|get> Description This command set s the H.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 200 www .polycom.com fcif Full Common Interchange Format ( 352 x 288 resolution). get Displays the current setting.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 201 rt <normal|inverted|get> Description This command let s you configure the rt serial interface control signal (receive timing: clock). The defa ult setting for this signal is normal .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 202 www .polycom.com Example rts normal User Interface Screen Location System Info> Admin Setup> Video Network>Advanc ed V .3 5: RTS This screen is only accessible if you have a V .35/RS-449/RS-530/RS-366 network interface connected to your system.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 203 v35broadcastmode <on|off|get> Description This comman d sets H.331 broa dcast mode f or transmiss ions via satellite. on Enables broadcast mo de. off Disables broadcast mode.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 204 www .polycom.com v35dialingprotocol <rs366|get> Description This command select s the V .35/RS-449/RS-530/RS-366 dialing protocol. Selecting a dialing pr otocol is no t needed if you are using your DCE to dial the call or if you have a dedicated connection to the far site.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 205 nomenclature of the user interf ace and the command isdnnum (see page 178 ). set <1b1|1b2> Set s the ISDN video number for a B channel line when followed by a v35 number p arameter .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 206 www .polycom.com Example v35portsused 1+2 User Interface Screen Location System Info>Admin Setup>V ideo Network>Vide o Network: V .35 Ports Used This screen is only accessible if you have a V .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 207 value V .35/RS-449/RS-530/RS-366 prefix. The prefix is a function of your DCE. P lease consult the DCE user guide for additio nal information. get < " valid speed " > Displays the current setting for valid spee d .
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 208 www .polycom.com V .35/RS-449/RS-530/RS-366 p rofiles (equipment/manufacture r) available. Consult your DCE user guide for additional informatio n on setting dialing profiles. get Displays the current profile.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 209 System Info>Admin Setup>V ideo Network>Video Ne twork> Advanced Dialing This screen is only accessible if you have a V .35/RS-449/RS-530/ RS-366 network interface connected to your system.
ViewStation EX, V iewStation FX, and VS4000 A PI Guide 210 www .polycom.com Example v35suffix set 128 ”#4#2” This command associa tes the dialing suffix #4#2 to th e speed 128. User Interface Screen Location System Info>Admin Setup>V ideo Network>Video Ne twork> Advanced Dialing This screen is only accessible if you have a V .
© Polycom, Inc. 2003 211 Safety and Legal Notices Important Safeguards Read and un derstand the following instruct ions before using the system: • Close supervision is necessary when the system is used by or near chil dren. Do not leave unattended while in use .
ViewStation EX, V iewStation FX, and VS4000 API Guide 212 www .polycom.com Warranty Polycom, Inc. warrants its produc ts to be free of de fects in ma te ria ls an d fa ct ory workma nsh ip for a period of tw elve (12) months from date of purchase.
Safety and Legal Notices © Polycom, Inc. 2003 213 Part 68 FCC Rules This equipment co mplies with Part 68 of the FCC rule s. On the label of th is equipment is a label that contains, amo ng ot he r info rmation , t he FCC reg istratio n num be r an d rin ger e qui valen ce number (REN) for th is eq uip men t.
ViewStation EX, V iewStation FX, and VS4000 API Guide 214 www .polycom.com The Ringer Equivalence Number (REN) assigned to each relevant terminal device provid es an indication of t he maximum numbe r of terminals allowe d to be connecte d to a telephone in terface.
Safety and Legal Notices © Polycom, Inc. 2003 215 Dichiarazione di conformità: Con la presen te Po lyco m Ltd . dichia ra ch e il ViewStation EX/FX/V S4000 soddisfa i requisiti essenziali e le altre d ispo sizioni p ertinen ti d ella direttiva 19 99/5/ CE.
ViewStation EX, V iewStation FX, and VS4000 API Guide 216 www .polycom.com Underwriters Laboratories Statement The system is intended to be powered only by the su pplied power supply unit. Special Safety Instructions Follow existing safe ty instructions and observe all safeguar ds as directed.
デバイスPolycom ViewStation EXの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Polycom ViewStation EXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPolycom ViewStation EXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Polycom ViewStation EXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Polycom ViewStation EXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Polycom ViewStation EXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPolycom ViewStation EXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Polycom ViewStation EXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPolycom ViewStation EXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
