POSIFLEX Business Machinesメーカー16560900020の使用説明書/サービス説明書
ページ先へ移動 of 20
Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
Part 2 ALERT TO OUR HONORABLE CUSTOMERS: z Please always rea d thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences.
Part 3 INTRODUCTION PRODUCT PICTURES Front Views Side Views Rear Views 7 5 1 3 6 11 8 9 4 2 8 9 12 5 1 3 7 10 6 2 11 13 10 4 6 13 6 7 14 11 13 21 15 17 Inside the touch open cover 18 19 20 6 13 13 7 1.
Part 4 Bottom View s PARTS IDENTIFICATION 16. Optional top mount upgrade ki t e.g. PD- 310 or PD- 2604 17. Power switch 18. Brightness adjust p ush button “ + ” 19. Touch open door latch 20. Brightness adjust push button “ - ” 21. Double deck USB ports 22.
Part 5 PRODUCT FEATURES Standard Features: a) Applicable CPU: 1. for KS-6615 only: Intel Celeron M 1.0 GHz 2. for KS-6615 / 6617: Interl Celeron M 1.5 GHz 3. for KS- 7315 / 7317: Intel Celeron M 1.86 GHz or Core Duo 2.0 GHz or Core 2 Duo 2.16 GHz b) Fan free structure with Aluminum main unit for harsh environment c) Data storage device: SATA HDD 2.
Part 6 11. one UPS battery connector m) Touch control functions : left/right button, double click, drag & draw n) Dual display support (per OS capability) o) Dynamic video memory (max.
Part 7 IN STAL LATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is remov.
Part 8 when disconnecting any connector. Failure to do this could damage the cable and jack that is considered as an artificial destruction. Damages due to incorrect disconnection operation are not co.
Part 9 battery cable. The UPS battery will be held in place when the bottom plate is screwed back. As for gen 6 super slim base model, please remove the UPS battery bracket on bottom of the stand assembly instead of the bottom plate as in the right picture.
Part 10 ROUTING THE CABLES The designed cable routing for all external cable connections referring to the pictures above is to have all the cables coming from outside into the cable exit (position A ) at bottom side of gen 5 slim base and to be regulated into the two cable holders ( B ) then enter the base through the passage ( C ).
Part 11 window are designated for VGA port and COM port power supply function. Please consult your dealer for technical support on setup of these jumpers.
Part 12 the DC supply in COM port is not required, it will be powered through the USB port. CONNECTING CASH DRAWER (OPTION) The RJ11 connector in main connection area of a KS system can be used for controlling most of the common cash drawers available on the market.
Part 13 Back side of WB-6000VB Then slide the main unit down to move the pegs into the lower slot part of the holes till it clicks. Note that all the cables come out of the stand from the lower edge and won’t get trapped by this mounting operation.
Part 14 15”85.1/89.4T 17 ” 89 8/94 1T Align the four matching pegs on the back of the main unit as circled in the below left picture with the four matching holes in the wall mount brackets as also marked in circles in the top pictures and allow the main unit to slide down the winding grooves in the wall mount backpack.
Part 15 For KS systems preloaded with Windows XP Pro or WEPOS on HDD, Posiflex provides recovery CD or DVD delivered with the touch terminal for the preloaded operating system. The System Integrator shall take care of software restoration after OS recovered.
Part 16 be powered off for more than few days, please always disconnect the battery from the system . R econnect it and turn on the system to recharge the battery for 1 ~ 2 hours every 3 months for temperature lower than 30 C. Recharge for 1 ~ 2 hours every month for temperature over 30 C.
Part 17 POWER ON/OFF & BRIGHTNESS CONTROL Touch Open Cover A gentle tap on the touch open cover at left side of the main unit will open the cover and show the power switch, brightness adjust push button switches and a double deck USB connector. Each single press on the + or – button changes the LCD panel display brightness by a small amount.
Part 18 LAN Wake up: Power Management -- Wake- Up by PCI card RING Power Management -- Power On by Ring Time Power Management -- Resume by Alarm this forced power off, please disconnect the UPS battery if installed and the AC power supply for few minutes.
Part 19 Advanced Chipset Features On-Chip Frame Buffer Size 8MB(1MB, 4MB, 8MB, 16MB, 32MB) DVMT Mode DVMT (FIXED, DVMT, BOTH) DVMT / FIXED Memory Size 128MB (64MB, 128MB) DISPLA Y ISSUES Main LCD Disp.
Part 20 Mouse Emulation The touch panel in KS system uses USB interface as standard. Only the optional InfraRed type touch panel model uses RS232 interface. When the touch driver is properly installed, this touch panel works exactly like a standard mouse for both interfaces.
デバイスPOSIFLEX Business Machines 16560900020の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
POSIFLEX Business Machines 16560900020をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPOSIFLEX Business Machines 16560900020の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。POSIFLEX Business Machines 16560900020の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。POSIFLEX Business Machines 16560900020で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
POSIFLEX Business Machines 16560900020を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPOSIFLEX Business Machines 16560900020の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、POSIFLEX Business Machines 16560900020に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPOSIFLEX Business Machines 16560900020デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。