POSIFLEX Business MachinesメーカーKS-6217の使用説明書/サービス説明書
ページ先へ移動 of 20
Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
Part 2 ALERT TO OUR HONORABLE CUSTOMERS: l Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences.
Part 3 IN TRODUCTION PRODUCT PICTURES Front Views for KS - 6315/6217; AMD LX - 700 for KS - 6115 1. one optional Compact Flash memory card connector 2.
Part 4 Rear Views Bottom Views PARTS IDENTIFICATION 1. Main unit 2. Touch panel / LCD panel 3. Opti onal side mount kit e.g. SD - 400 4. Power indicator 5. Universal base stand 6. Slim base stand 7. Cable cover 8. Removal hollow in cable cover 9. Lock / release lever for tilt angle adjust 10.
Part 5 20. Auxiliary cable exit 21. Rubber feet 22. Optional CDROM drive PRODUCT FEATURES Standard Features: a) CPU: VIA C 7 1.0 G Hz or above b) Fanless structure w ith Aluminum die cast main unit casing for harsh environment or metal c) Data storage device: SATA HDD 3.
Part 6 11. 2 SATA ports for Serial ATA HDD in base or external device m) Touch control functions : left/right button, double click, drag & draw n) Dual display support (per OS capability) o) VGA m.
Part 7 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make cert ain that the system is turned off and the external power source to the set is remove.
Part 8 SEPARATING MAIN UNIT In order to settle the touch terminal properly in a point of sale system, all the cable connections have to be routed through its base, either slim or universal.
Part 9 CABLE PASSAGE Please route all cables through the cable passage to main unit in desktop mount application. Hold them together with the cable tie. Pass all cables (but those for HDD and UPS bat tery) through the cable exit to external connections.
Part 10 pay particular attention to the environment requirements for UPS battery in next chapter “USING THE TOUCH POS”. BASE MOUNT UPGRADE KIT On rear edge of the stand assembly for desktop mount application, there is a rear connect cover.
Part 11 guide to mount the interface bracket and fix it to the rear connect area of the system as in the right picture. Route the VGA through the cable exit of the base stand to the main unit.
Part 12 arr owed in same picture. Gently arrange the excessive length of this cable back in the hole and screw - fit it back to the position originally occupied by the cover . Please reserve the cover if there is chance to have the side mount kit removed in the future.
Part 13 The area required for wall mount application is determined by the main unit dimensions and is 3 78 mm in width and 3 12 mm in height for KS - 6215 and is 4 10 mm in width and 3 55 mm in height for KS - 6217.
Part 14 there be any difficulty in using the Posiflex supplied USB interface CDROM drive in recovery, please try disable the USB 2.0 function of system BIOS setup by going to “ Integrated Peripheral.
Part 15 USING THE TOUCH TERMINAL APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation.
Part 16 Emergency treatment: The battery is constructed maintenance free and leakproof. It is well protected in KS system as long as the ambient temperature remains below 30 ° C and the ventilation of the KS system remains free.
Part 17 The relationship between the indicator status and other conditions is summarized in following table: Indicator St atus System Status External Power UPS Battery Powering Up Off Off Off Not pres.
Part 18 Automatic Power On Control The system may also turn on according to some preset c onditions such as Modem Ring Up and Alarm Clock Wake Up or LAN Wake Up.
Part 19 SERIAL PORTS – COM1/2 /3/4 In KS system , there are 4 serial ports in form of 10 pin RJ45 jacks available. All serial port s can supply a +5 V DC through pin 9 after proper jumper setting change. All ports are standard RS232 serial ports after the conversion cables as status at delivery .
Part 20 TOUCH PANEL All paragraphs below are applicable for models with touch panel only. The user of those models without touch panel can ignore them and consider this user ’ s manual ends here. Mou se Emulation The touch panel in KS system uses internal USB interface as standard and occupies no external port .
デバイスPOSIFLEX Business Machines KS-6217の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
POSIFLEX Business Machines KS-6217をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPOSIFLEX Business Machines KS-6217の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。POSIFLEX Business Machines KS-6217の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。POSIFLEX Business Machines KS-6217で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
POSIFLEX Business Machines KS-6217を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPOSIFLEX Business Machines KS-6217の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、POSIFLEX Business Machines KS-6217に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPOSIFLEX Business Machines KS-6217デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
