PoulanメーカーPP1130ESAの使用説明書/サービス説明書
ページ先へ移動 of 32
OWNER'S MANUAL MODEL NUMBER: PP1130ESA SNO W THR O WER Alwa ys W ear Eye Pr otection During Operation IMPOR T ANT MANU AL Do Not Thr ow A way 183615 Re v . 6 09.30.02 BY Printed in U.S .A. W ARNING: Read the Owner's Manual and fol low all W arnings and Safety In struc tions.
2 Safe Operation Practices f or Snow Thrower s IMPORT ANT : This machine is capable of amputating hands and f eet and throwing objects. F ailure to obser v e the follow ing saf ety instr uctions could result in serious injur y or death. SAFETY R ULES W ARNING: This snow thro wer is for use on sidewalks, drivewa ys and other ground le vel surfaces.
3 PR ODU CT SPECIFICA TIONS Gasoline Capacity 4.0 Quar ts and T ype: Unleaded Regular only Oil T ype SAE 30 (abov e 40°F) (API-SF-SJ): SAE 5W -30 or 10W -30 (0° to +40°F) SAE 0W -30 (below 0°F) Oil Capacity: 26 Ounces Spark Plug: Champion RN4C (Gap: .
4 P AR TS P A CKED SEP ARA TEL Y IN CAR T ON MAINTENANCE ..................................................... 14-15 MAINTENANCE SCHEDULE ..................................... 14 SER VICE AND AD JUST MENTS ........................... 16-18 ST ORA GE .
5 ASSEMBL Y / PRE-OPERA TION Read these instructions and this man u al in its entirety bef ore you attempt to assemble or operate y our new sno w thrower . Y our new snow thro wer has been as sem bled at the f actor y with the e x cep tion of those par ts left unassembled f or shipping pur poses .
6 ASSEMBL Y / PRE-OPERA TION INST ALL A UGER CONTROL R OD (See Figs. 5 and 6) The auger control rod has the shor t loop on the end of the spring as shown. 1. Slide rubber slee ve up rod and hook end of spring into control ar m with loop opening up as sho wn.
7 ASSEMBL Y / PRE-OPERA TION INST ALL WEIGHT BA G (See Fig. 10) Though seldom required, the weight bag will re duce the ten den cy of the auger housing to ride up on hard, icy dr ifts. Should conditions require it, install as f ollows: 1. Shut off engine and wait f or all moving par ts to stop .
8 OPERA TION KNO W Y OUR SNO W THR O WER READ THIS O WNER'S MANUAL AND ALL SAFETY R ULES BEFORE OPERA TING Y OUR SNO W THRO WER. Compare the illustrations with y our snow thrower to f amiliarize yourself with the location of v arious controls and adjustments.
9 MEETS A.N.S.I. SAFETY REQUIREMENTS Our snow thro wers conform to the standards of the American National Standards Institute. FIG. 11 OPERA TION LH and RH turn triggers - used to steer the sno w thrower . Drive speed control le ver - used to select forw ard or re verse motion and speed of snow thro wer .
10 The operation of any sno w thrower can result in f oreign objects thrown into the ey es, which can result in se vere e ye damage. Alwa ys wear saf ety glasses or eye shields while oper ating your sno w thrower or perf or ming an y ad just - ments or repairs.
11 OPERA TION T O THRO W SNO W (See Fig. 16) The auger rotation is controlled by the auger control le ver located on the right side handle. • Squeeze auger control le ver to handle to engage the auger and throw sno w . • Release the auger control le ver to stop thro wing snow .
12 ENGINE OIL FILL CAP / DIPSTICK FUEL SHUT - OFF V AL VE PRIM ER SAFETY IG NI TION KEY THRO T TLE CHOKE CONTROL ST ARTER BUTT ON RECOIL ST ARTER HANDLE GAS O LINE FILLER CAP NO TE: ALL ITEMS ARE SHO WN IN THEIR TYPICAL LOCA TION. A CTUAL LOCA TION MA Y V AR Y WITH ENGINE ON Y OUR UNIT .
13 COLD ST AR T - ELECTRIC ST ARTER 1. Inser t saf ety ignition ke y into the ignition slot until it clicks . DO NO T tur n the k ey . K eep the extr a safety ignition ke y in a safe place . 2. Place throttle control in F AST position. 3. Rotate choke control to FULL position.
14 MAINTENANCE LUBRICA TION CHART GENERAL REC OM MEN DA TIONS The warranty on this sno w thrower does not co ver items that hav e been sub ject ed to operator abuse or negligence. T o receive full v alue from the warranty , operator must maintain snow thro wer as in str uct ed in this manual.
15 MAINTENANCE V -BEL TS Check V -belts f or deterioration and wear after e ver y 50 hours of operation and replace if necessary . The belts are not ad just able. Replace belts if they begin to slip from wear . (See “T O REMO VE BEL T CO VER” in the Ser vice and Adjustments section of this manual).
16 SER VICE AND ADJUSTMENTS W ARNING: T o a void serious injury , before perf orming any service or ad- just ments: 1. Be sure thr ottle is in STOP position. 2. Remove safety ignition ke y . 3. Make sure the augers and all mo v ing parts have completely stopped.
17 SER VICE AND ADJUSTMENTS T O REPLA CE BEL TS (See Fig. 23) The auger and traction drive belts are not adjustab le. If the belts are damaged or begin to slip from wear , the y should be replaced. It is recommended that the belt(s) be replaced by a qualifi ed service center .
18 ST ORA GE Immediately prepare your sno w thrower f or storage at the end of the season or if the unit will not be used for 30 da ys or more. W ARNING: Never store the sno w thro wer with gaso line .
19 Does not start 1. Fuel shut-off valv e (if so 1. T ur n fuel shut-off v alve to OPEN position. equipped) in OFF position. 2. Safety ignition k ey 2. Inser t saf ety ignition ke y . is not inser ted. 3. Out of fuel. 3. Fill fuel tank. 4. Throttle in STOP position.
20 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA A UGER HOUSING / IMPELLER ASSEMBL Y 6 6 5 6 6 9 12 2 1 3 7 7 8 6 11 28 27 27 19 30 26 25 24 23 22 18 21 20 19 28 19 31 25 24 26 23 29 21 21 19.
21 KEY P ART NO . NO . DESCRIPTION 1 183578 Bag, Weight 2 183577 Brac ket, Weight Bag 3 74520524 Screw , Hex Head 5/16-18 x 1-1/2 4 181083 Pulley , Impeller 5 175323 Bearing Assembly , Flange 6 155377.
22 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA CONTR OL P ANEL / DISCHARGE CHUTE 3 2 1 1 2 6 7 4 5 6 16 18 17 10 11 14 3 13 15 8 8 9 12 19 2 2 21 21 22 23 14 26 28 27 27 25 20 29 24 22 23.
23 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA CONTR OL P ANEL / DISCHARGE CHUTE KEY P ART NO . NO . DESCRIPTION 1 183334 Knob , Lev er 2 17501010 Screw #10-24 x 5/8 3 178674 Control Assemb.
24 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA HANDLES 5 11 12 15 7 10 33 18 19 37 34 35 20 20 21 21 6 11 5 36 13 2 5 15 11 4 4 3 3 16 17 16 23 22 38 39 24 27 26 24 25 27 40 22 17 1 4 4 14 .
25 KEY P ART NO . NO . DESCRIPTION 1 178875X479 Lev er , A uger Control, RH 2 178648X479 Lev er , T raction Drive Control, LH 3 179439 Nut, Cage 1/4-20 4 178888 Bushing, Flange 5 169675 Retainer , Hai.
26 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA DRIVE 35 33 15 41 22 34 29 22 31 26 7 2 43 2 11 3 3 25 24 23 12 32 27 44 20 21 21 22 16 1 17 15 2 4 13 1 1 2 5 3 1 2 5 3 3 5 1 2 3 13 1 5 2 7 .
27 KEY P ART NO . NO . DESCRIPTION 1 146315 Screw , Hex Head 5/16-18 x 3/4 2 73800500 Nut, Lock 5/16-18 3 155415 W asher , Flat 4 17490508 Screw , Hex Head 5/16-18 x 1/2 5 180017 Bearing, Flange 6 180.
28 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA CHASSIS / ENGINE / PULLEYS 10 21 6 19 17 10 21 22 23 2 1 3 4 6 7 8 9 12 13 15 27 26 25 24 18 7 6 20 14 28 6 30 29 31 31 47 48 46 40 44 26 11 4.
29 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA CHASSIS / ENGINE / PULLEYS KEY P ART NO . NO . DESCRIPTION 1 181044 Spring, T raction Idler 2 180522 Pulley , Idler (2-1/4) 3 - - - Engine , T.
30 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA WHEELS / DECALS 10 31 32 30 15 18 17 19 10 12 1 2 7 4 3 4 13 20 11 21 33 22 23 24 10 10 25 26 28 27 29 28 29 11 11 27 26 28 23 22 33 20 11 14 .
31 REP AIR P ARTS SNO W THRO WER - MODEL NUMBER PP1130ESA WHEELS / DECALS KEY P ART NO . NO . DESCRIPTION 1 178834 Wheel Assembly (16 ” P ow er Steer) 2 155443 Pin, Klik 1/4 3 181843 Cov er , P ower.
giving the complete mfg. ID#, serial number and date of purchase of your product and the name and address of the authorized dealer from whom it was purchased. THIS W ARRANTY DOES NO T APPL Y T O INCIDENT AL OR CONSEQUENTIAL D AMAGES AND ANY IMPLIED WA R RAN TIES ARE LIMITED TO THE SAME TIME PERIODS ST A TED HEREIN FOR OUR EXPRESSED W AR- RAN TIES.
デバイスPoulan PP1130ESAの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Poulan PP1130ESAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPoulan PP1130ESAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Poulan PP1130ESAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Poulan PP1130ESAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Poulan PP1130ESAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPoulan PP1130ESAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Poulan PP1130ESAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPoulan PP1130ESAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
