ProFormメーカー490GS 831.299371の使用説明書/サービス説明書
ページ先へ移動 of 18
¨ USER'S MANUAL Model No. 831.299371 Serial No. The serial number is found in the location shown below. Write the serial number in the space above for future reference. CAUTION Read all precautions and in- structions in this manual before using this equipment.
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 13. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BE- FORE YOU BEGIN on page 4 if the treadmill is not working properly.
4 Thank you for selecting the new PROFORM ¨ 490GS treadmill. The 490GS treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the conve - nience and privacy of your home.
1. With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown. 2. Insert one of the Extension Legs (34) into the treadmill as shown. (Note: It may be helpful to tip the Uprights [11] in the direction shown by the arrow as you insert the Extension Leg.
5. Attach the Storage Latch (14) to the left Upright (11) with two Screws (3). Be careful not to overtighten the Screws. 6. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a se- cure location. The allen wrench is used to adjust the walking belt (see page 13).
7 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
8 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in. (See HOW TO PLUG IN THE POWER CORD on page 7.) Next, step onto the foot rails of the treadmill. Find the clip attached to the key, and slide the clip onto the waistband of your clothing.
9 Start the walking belt. After you have moved the speed control to the RESET position, slowly slide it upward until the walking belt begins to move at slow speed. Carefully step onto the walking belt and begin ex- ercising. Change the speed of the walking belt as desired by sliding the speed control.
10 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
11 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.
5. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may be permanently damaged.
14 CONDITIONING GUIDELINES The following guidelines will help you to plan your exer- cise program. RememberÑthese are general guide- lines only. For more detailed exercise information, ob- tain a reputable book or consult your physician.
15 SUGGESTED STRETCHES The correct form for several basic stretches is shown in the drawings at the right. Move slowly as you stretchÑnever bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
P ART LISTÑModel No. 831.299371 R0100A Key No. Qty. Description 1 2 Handrail 2 1 Key/Clip 3 8 Screw 4 1 Battery Cover 5 2 Foot Rail 6 1 Lift Motor 7 1 Incline Control 8 1 Speed Potentiometer 9 1 Spee.
70 65 48 25 24 56 25 13 76 78 13 42 73 77 9 8 40 25 40 25 39 39 85 69 66 66 88 75 75 75 2 1 46 10* 34 12 17 20* 21 22 27 19 18 31 30 29 33 43 36 38 44 37 45 50 47 48 48 39 51 11 23 22 22 58 70 53 36 3.
Part No. 159197 R0100A Printed in USA © 2000 Sears, Roebuck and Co. The model number and serial number of your PROFORM ¨ 490GS treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
デバイスProForm 490GS 831.299371の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
ProForm 490GS 831.299371をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはProForm 490GS 831.299371の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ProForm 490GS 831.299371の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ProForm 490GS 831.299371で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ProForm 490GS 831.299371を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はProForm 490GS 831.299371の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ProForm 490GS 831.299371に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちProForm 490GS 831.299371デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
