ProFormメーカー830QTの使用説明書/サービス説明書
ページ先へ移動 of 26
USER'S MANUAL ¨ CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. 831.299282 Serial No. Find the serial number in the location shown below.
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it.
21. When using i-Fit.com CDÕs and videos, an electronic ÒchirpingÓ sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the ÒchirpÓ and be prepared for speed and/or in- cline changes. In some instances, the speed and/or incline may change before the per- sonal trainer describes the change.
5 Thank you for selecting the revolutionary PROFORM ¨ 830QT treadmill. The 830QT treadmill combines ad- vanced technology with innovative design to help you get the most from your exercise program in the conve- nience and privacy of your home.
6 ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver .
6. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 21). To protect the floor or carpet from damage, place a mat under the treadmill.
8 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
Note: If there is a thin sheet of clear plastic on the face of the console, remove it. FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features to help you get the most from your exercise. When the console is in the manual mode, the speed and incline of the treadmill can be controlled with a touch of a button.
10 STEP-BY-STEP CONSOLE OPERATION Make sure that the on/off switch near the power cord is in the on position. Next, make sure that the key is removed from the console and the power cord is properly plugged in (see HOW TO PLUG IN THE POWER CORD on page 8).
11 CALS/FAT CALS/ PULSE display ÑThis display shows the ap- proximate numbers of calories and fat calories you have burned (see FAT BURNING on page 22). Every seven sec- onds, the display will change from one number to the other, as shown by the arrows in the display.
12 HOW TO USE PERSONAL TRAINER PROGRAMS Insert the key into the console. When the key is in- serted, the four displays and various indicators on the console will light. Select one of the personal trainer programs. When the key is in- serted, the manual mode will be selected and the MANUAL indicator will light.
13 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFit.com CDÕs , the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 13 and 14 for connecting instructions.
14 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord.
15 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 14.
16 Press the PLAY button on your CD player or VCR. A moment after the button is pressed, your per- sonal trainer will begin guiding you through your workout. Simply follow your personal trainerÕs instructions. Note: If the TIME/INCLINE/SEG TIME display is flashing, press the Start button or the Speed ▲ ▲ button on the console.
17 HOW TO USE PROGRAMS DIRECTLY FROM OUR INTERNET SITE Our new internet site at www.iFit.com allows you to access a large selection of programs that interactively control your treadmill to help you achieve your specific exercise goals. In addition, you can play iFit.
Follow your progress with the LED track and the four displays. See step 5 on page 10. Measure your pulse, if desired. See step 6 on page 11. When the program is finished, remove the key. Step onto the foot rails and remove the key from the console. Keep the key in a secure place.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
22 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. RememberÑthese are general guide- lines only. For more detailed exercise information, ob- tain a reputable book or consult your physician.
P ART LISTÑModel No. 831.299282 R0300A 1 1 Motor Belt 2 1 Pulley/Flywheel/Fan 3 4 Motor Nut 4* 1 Motor/Pulley/ Flywheel/ Fan 5 1 Incline Motor Bolt 6 1 Plastic Incline Motor Spacer 7 1 Incline Motor .
17 52 16 49 24 89 70 100 78 62 41 27 28 29 69 30 26 125 15 8 5 7 13 19 11 9 5 15 35 36 32 33 15 31 38 39 15 15 76 18 11 9 22 21 3 1 3 4* 2 39 40 92 33 43 42 32 68 44 45 46 41 71 55 68 44 101 101 47 45.
108 107 109 87 77 89 89 46 46 11 6 50 11 7 11 7 89 20 97 101 103 11 9 97 101 96 97 101 83 84 84 83 82 16 16 16 94 101 91 99 69 104 86 15 95 72 101 105 101 86 95 47 16 34 56 80 73 97 101 103 104 20 47 11 0 15 11 0 108 107 85 76 46 46 90 76 121** 79 79 1 18** 124 124 106* 106* 123 123 126 126 102 111 11 2 11 3 11 4 11 5 EXPLODED DRA WINGÑModel No.
Part No. 161763 R0300A Printed in USA © 2000 Sears, Roebuck and Co. The model number and serial number of your PROFORM ¨ 830QT treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
デバイスProForm 830QTの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
ProForm 830QTをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはProForm 830QTの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ProForm 830QTの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ProForm 830QTで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ProForm 830QTを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はProForm 830QTの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ProForm 830QTに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちProForm 830QTデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
