ProFormメーカー831.297690の使用説明書/サービス説明書
ページ先へ移動 of 18
USER'S MANUAL ¨ CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. 831.297690 Serial No. Find the serial number in the location shown below.
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 14. Never start the treadmill while you are stand- ing on the walking belt. Always hold the handrails while using the treadmill. 15. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 16. The pulse sensor is not a medical device.
4 Thank you for selecting the new PROFORM ¨ J6 tread- mill. The J6 treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home.
1. With the help of a second person, carefully lay the treadmill on its right side. Insert an Extension Leg (103) into the base of the left Upright (82) as shown. Make sure that the Extension Leg is turned so the Warning Decal (20) is on the side shown.
6 4. Note that there is still a plastic tie in the Right Handrail (85); do not remove this plastic tie. Position the Right Handrail (85) on the right Upright (82) as shown. The bracket on the base of the right Upright should be inside of the lower end of the right Handrail, as shown in the inset drawing.
7 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
8 CONSOLE DIAGRAM Clip Key Pulse Sensor Displays LED Track Incline Display STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the on/off switch near the power cord is in the on position. Next, make sure that the key is removed from the console and then plug in the power cord (see HOW TO PLUG IN THE POWER CORD on page 7).
9 Change the incline of the treadmill as desired. To change the incline of the treadmill, press the incline buttons. Each time one of the buttons is pressed, the incline will change by 0.5%. The but- tons can be held down to change the incline rapidly.
10 If the displayed heart rate appears to be too high or too low, or if your heart rate is not displayed, lift your thumb off the sensor and allow the display to reset. Press down again on the sensor as de- scribed above. Make sure that your thumb is posi- tioned as shown, and that you are applying the proper amount of pressure to the pulse sensor.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.
12 TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.
13 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be permanently damaged.
14 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. RememberÑthese are general guide- lines only. For more detailed exercise information, ob- tain a reputable book or consult your physician.
15 P ART LISTÑModel No. 831.297690 R0998B 1 1 Motor Belt 2 1 Pulley/Flywheel/Fan 3 4 Motor Nut 4* 1 Motor/Pulley/Flywheel/Fan 5 3 Incline Motor Bolt 6 1 Incline Motor Spacer 7 1 Incline Motor 8 1 Sto.
41 27 28 29 16 30 16 26 25 16 24 18 16 15 8 5 7 6 13 19 16 5 15 35 36 32 33 15 31 37 23 38 39 15 15 76 18 16 22 21 3 1 3 4* 2 39 40 109 33 43 42 32 45 44 46 44 45 46 41 71 55 44 44 44 45 76 49 46 47 1.
90 97 98 103 100 16 97 98 107 97 98 99 83 84 84 83 82 77 93 93 93 94 78 101 91 106 62 104 86 92 95 97 98 103 104 72 73 101 105 101 75 74 81 80 11 4 78 75 80 11 4 79 78 87 11 7 11 7 11 7 11 7 88 85 86 95 92 93 48 50 80 80 102 78 20 20 34 108 34 79 96 96 96 96 11 8 EXPLODED DRA WINGÑModel No.
Part No. 147948 H03058AC R0998B Printed in USA © 1998 Sears, Roebuck and Co. The model number and serial number of your PROFORM ¨ J6 treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
デバイスProForm 831.297690の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
ProForm 831.297690をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはProForm 831.297690の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ProForm 831.297690の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ProForm 831.297690で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ProForm 831.297690を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はProForm 831.297690の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ProForm 831.297690に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちProForm 831.297690デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
