ProFormメーカー831.298061の使用説明書/サービス説明書
ページ先へ移動 of 18
¨ USER'S MANUAL CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. 831.298061 Serial No. The serial number is found in the location shown below.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 13. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BE- FORE YOU BEGIN on page 4 if the treadmill is not working properly.
4 Thank you for selecting the new PROFORM ¨ CROSS- WALK JM treadmill. The CROSSWALK JM treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular ex- ercise in the convenience and privacy of your home.
5 ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver .
4. Hold one of the Handrails (1) at an angle as shown and insert the upper end into the right Upright (11) as far as possible. Keep the lower end of the Handrail away from the treadmill to avoid scratching the finish. Next, rotate the lower end of the Handrail (1) to the posi- tion shown by the dotted line.
7 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
CONSOLE DIAGRAM Clip Key Speed Control Displays 8 CAUTION: Before operating the console, read the following precautions. ¥ Do not stand on the walk- ing belt when turning on the power. ¥ Always wear the clip (see the drawing at the left) while using the treadmill.
9 Insert the key fully into the power switch. Inserting the key will not turn on the dis- plays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If you just in- stalled batteries, the displays will already be on.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
11 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.
5. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may be permanently damaged.
CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. RememberÑthese are general guide- lines only. For more detailed exercise information, ob- tain a reputable book or consult your physician.
Training Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training zone for longer than 20 minutes.
P ART LISTÑModel No. 831.298061 R1298A Key No. Qty. Description 1 2 Handrail 2 1 Key/Clip 3 11 Latch Screw/Console Screw 4 1 Battery Cover 5 2 Foot Rail 6 4 Foot Rail Cap Screw 7 1 Left Rail Cap 8 1 .
101 99 100 105 94 103 102 91 65 48 93 93 104 39 105 94 99 101 100 102 103 104 39 95 96 98 97 95 95 97 98 96 95 59 59 25 25 2 1 46 9 10* 34 14 3 12 17 20* 21 22 27 19 18 31 30 29 41 40 22 89 43 36 38 4.
Part No. 152037 H04232-C R1298A Printed in USA © 1998 Sears, Roebuck and Co. The model number and serial number of your PROFORM ¨ CROSSWALK JM treadmill are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
デバイスProForm 831.298061の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
ProForm 831.298061をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはProForm 831.298061の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ProForm 831.298061の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ProForm 831.298061で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ProForm 831.298061を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はProForm 831.298061の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ProForm 831.298061に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちProForm 831.298061デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
