ProFormメーカーPATL50707.0の使用説明書/サービス説明書
ページ先へ移動 of 28
USER'S MANUAL Model No. PATL50707.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference.
T ABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. Before beginning any exercise program, con- sult your physician. This is especially impor- tant for persons over the age of 35 or per- sons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
4 20. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD A ND MOVE THE TREADMILL on page 17.) You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.
5 Thank you for selecting the PROFORM ® STYLE 4500 treadmill. The STYLE 4500 treadmill combines ad- vanced technology with innovative design to let you enjoy an exc ellent form o f cardiovascular exercise in t he convenience and privacy of y our h ome.
ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials; d o not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 2. Have a second person hold the B ase (5 2) in th e position shown. Identify the Left Upright (53) (the Right Upright [ 54] has a large hole near the lower end). Hold the L eft Upright (53) so the two small holes for the latch assembly are on top as shown.
8 5. See the left inset drawing. Identify the two Frame Spacers (11). Open the included packet o f grease, and apply grease to both sides of both Frame Spacers.
8. See the upper inset drawing. If there is a guard on the end of the Console Wire, press the indicated tab and remove the guard with needlenose pliers. Discard the guard. With the help of a second person, hold the Console (91) near the Right Upright (54).
10 11. Pivot the cylinder end of the Gas Spring (98) down to the position shown. Remove the Spring Clip (96) from the end of the Gas Spring. Next, align the cylinder end of the Gas Spring (98) with the bracket in the center of the Base (52). Press the end of the Gas Spring onto the ball on the bracket.
15. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. The hex key is used to adjust the walking belt (see page 20). To protect the floor or carpet, place a mat under the treadmill.
12 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.
13 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. While the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
14 HOW TO USE THE MANUAL MODE 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Select the manual mode. When the key is in- serted, the manual mode will be selected. If you have selected a speed workout, reselect the manual mode by pressing the Workout Select button repeatedly until only zeros appear in the displays.
15 To r ese t the dis pla ys, press the Stop button, re- move the key, and then reinsert the key. Note: The console can d isplay speed and dis- tance in either kilome- ters or miles. To see which unit of measure- ment is selected, first re- move the key, hold down the Stop button, reinsert the key into the console, and then release the Stop button.
16 HOW TO USE A SPEED WORKOUT 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Select one of the six speed workouts. To select a speed work- out, press the Workout Sel.
17 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the l owest position. If you do not do this, you may damage the treadmill when you fold it. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 lbs.
18 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, slowly release the latch knob.
19 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
20 P ROBLEM: The walking belt slows when walked on SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm 2 (14-gauge) cord that is no longer than 5 ft. (1.5 m). b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- c ome damaged.
21 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
22 1 2 M10 x 60mm Patch Bolt 2 6 M10 x 58mm Bolt 3 2 M4.2 x 13mm Tek Screw 4 14 M4.2 x 16mm Screw 5 6 M8 Star Washer 6 1 Latch Warning Decal 7 2 M5 Star Washer 8 6 M8 x 15mm Bolt 9 6 M10 Star Washer 10 16 M4.
23 93 2 Belt Guide 94 1 5mm Hex Key 9 5 2 Frame Endcap 96 1 Gas Spring Clip Kit 97 1 Rear Foot, Right 98 1 Gas Spring 99 1 Receptical 100 1 Incline Motor Wire 101 2 Front Roller Washer 102 6 Cage Nut .
24 EXPLODED DRA WING A—Model No. P A TL50707.0 R 0907A 93 17 81 86 51 76 67 28 62 89 3 83 93 6 31 46 25 25 25 25 25 75 75 56 25 71 68 28 18 61 19 44 27 29 55 36 21 42 21 29 60 36 19 42 27 44 19 19 7.
25 EXPLODED DRA WING B—Model No. P A TL50707.0 R 0907A 34 38 44 79 34 30 59 38 107 106 11 5 11 2 11 4 111 11 3 11 0 111 116 11 0 37 11 3 66 90 20 20 20 99 65 47 47 47 57 21 21 42 42 21 109 87 2 23 2.
26 EXPLODED DRA WING C—Model No. P A TL50707.0 R 0907A 80 4 3 54 11 53 14 1 9 1 11 14 9 39 85 26 63 10 63 26 26 63 3 3 77 22 88 77 24 5 9 2 9 39 70 35 108 63 26 69 69 43 45 32 43 13 16 2 8 5 8 5 2 7.
27 EXPLODED DRA WING D—Model No. P A TL50707.0 R 0907A 15 91 73 4 12 9 4 4 4 4 4 4 4 4 4 21.
Part No. 260171 R1207A Printed in China © 2007 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, please see the dealer contact information on this page or on the included service card.
デバイスProForm PATL50707.0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
ProForm PATL50707.0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはProForm PATL50707.0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ProForm PATL50707.0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ProForm PATL50707.0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ProForm PATL50707.0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はProForm PATL50707.0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ProForm PATL50707.0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちProForm PATL50707.0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
