ProfotoメーカーD1 250 AIRの使用説明書/サービス説明書
ページ先へ移動 of 24
D1 1 000 Air D1 500 Air D1 250 Air D1 500 D1250 User´s Guide.
Profoto D1 2 www .profoto.com.
Profoto D1 3 www .profoto.com Thank you for choosing Profoto Thanks for sh owing us y our con fidenc e by inv esting in a D1 unit. For more than four decades we have sought the perfect light. What pushes us is our conviction that we can offer even better tools for the most demanding photographers.
Profoto D1 4 www .profoto.com Safety instructions SAFETY PRECAUTIONS! Do not operate the equipment before studying the instruction manual and the accompanyin g safety .
Profoto D1 5 www .profoto.com T able of Contents System description ...................................................................................................6 Profoto Air ......................................................................
Profoto D1 6 www .profoto.com System description Profoto’ s 40 years of experience in developing state-of-the-art flash units is built into the design of the D1 units. The D1 family fully complies with the demand for durable, tough, fast and consistent flash units that professional photographers of today require.
Profoto D1 7 www .profoto.com Profoto Air Remote Profoto Air Remote offers remote control of your D1 Air units and synchronization of all your D1 units at your camera or in your hand. The device controls practically an infinite number of D1 units in up to six groups, either all at once in Master mode, or in individual groups.
Profoto D1 8 www .profoto.com Nomenc lature 1 2 3 4 5 6 7 8 9 10 11 1. Display 2. On Button 3. Power Supply Indicator 4. T est Button 5. Ready Indicator 6. Channel Set Button 7. Setting Knob 8. SLAVE SETTING 8a. Slave Button 8b. RADIO Indicator 8c. IR Indicator 9.
Profoto D1 9 www .profoto.com 12 13 14 15 16 17 18 12. Sync Connector 13. Power Supply (AC) Connector 14. Fuse Holder 15. Umbrella T ube (on the upper side) 16.
Profoto D1 10 www .profoto.com Functionality Power supply The D1 unit can be connected to 100-120 V AC or 200-240 V AC, 50-60 Hz. The unit automatically senses and adapts to the supplied voltage and frequency . The power supply fuses must not be smaller than specified in the section T echnical data .
Profoto D1 11 www .profoto.com • The built-in IR receiver senses the flash release as well as IR signals from most IR sync transmitters.
Profoto D1 12 www .profoto.com Remote control Wireless remote control is available for D1 Air units, using the Profoto Air Remote device or the Profoto Air USB device in combina tion with the Profoto Studio Air software.
Profoto D1 13 www .profoto.com Operating instructions Stand mounting 1. Mount and fasten the D1 unit on the stand using the locking knob on the Stand Adapter [18]. 2. The unit can be directed upwards/downwards when the Locking Knob [16] is loosened. Fasten the Locking Knob [16] when the unit is correctly directed.
Profoto D1 14 www .profoto.com Modeling light setting 1. Use the Model Button [10a] to select the modeling light: a. T o selec t proportio nal modeli ng light, press and hold down the Model Button [10a] until the PROP Indicator [10b] is illuminated. b.
Profoto D1 15 www .profoto.com Sync via cable 1. Connect a sync cord from the camera to the Sync Connector [12] on the D1 unit. Sync via IR 1. Press and hold down the Sla ve Button [8a] until the IR Indicator [8c] is illuminated. Sync via radio (D1 without Profoto Air) 1.
Profoto D1 16 www .profoto.com T urn off unit All settings will remain when the unit is in standby mode. If the power cable is removed, the modeling light will revert to the default settings; the modeling light will be turned off and the energ y level of the free modeling light will be set to 10.
Profoto D1 17 www .profoto.com Maintenance Changing flash tube and/or modeling lamp 1. Ensure tha t the D1 unit is turned off and that the power cable is not connected. 2. If the unit has been in use, wait five minutes to allow the unit to be fully discharged.
Profoto D1 18 www .profoto.com Changing built-in fuse 1. Ensure tha t the D1 unit is turned off and that the power cable is not connected. 2. If the unit has been in use, wait five minutes to allow the unit to be fully discharged (the autodump function).
Profoto D1 19 www .profoto.com Adaptive thermal control The D1 unit is equipped with an ada ptive thermal control system. If there is risk for over heating of the unit, caused by either heavy use or abnormal external influence, the thermal control system will automatically protect the unit from damage.
Profoto D1 20 www .profoto.com T echnical data D1 1000 Air D1 500 Air D1 250 Air D1 500 D1 250 Specifications D1 1000 Air D1 500 Air D1 500 D1 250 Air D1 250 Energy (Ws/J) 1000 500 250 Power range f-stop 7 7 7 Ws 15.6-1000 7.8-500 3.9-250 Power range 1/1-1/64 1/1-1/64 1/1-1/64 Power increments 1/10 1/10 1/10 Flash dura tion t0.
Profoto D1 21 www .profoto.com Specifications D1 1000 Air D1 500 Air D1 500 D1 250 Air D1 250 Modeling lamp 120V , 300W 120V , 300W 120V , 300W Modeling light function Off, Prop, Free Off, Prop,.
This page is intentionally left blank..
This page is intentionally left blank..
Profoto AB P .O. Box 2023 SE-128 21 Skarpnäck SWEDEN Phone +46 8 447 53 00 info@profoto.com www .profoto.com 344091-1-320. Printed in Sweden. T echnical data and product information are subject to change without notice.
デバイスProfoto D1 250 AIRの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Profoto D1 250 AIRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはProfoto D1 250 AIRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Profoto D1 250 AIRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Profoto D1 250 AIRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Profoto D1 250 AIRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はProfoto D1 250 AIRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Profoto D1 250 AIRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちProfoto D1 250 AIRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。