PYLE AudioメーカーPLCD22MRPの使用説明書/サービス説明書
ページ先へ移動 of 18
OWNER'S MANUAL Shipboar d Audio System • PLL Synthesizer Stereo Radio • Digital Compact Disc Player • Automatically Memory Storing • Direct T rack Access • Program CD T racks • Electronic Shockpr oof (ESP) Function PLCD22MRP www .pyleaudio.
Installation .....................................3 T ake out screw before installation ..3 Installing the unit ..........................3 Wiring Connection ........................4 Operation .......................................5 Location of keys .
3 T AKE OUT SCREW BEFORE INST ALL Before install the unit, please r emove the two screws. NOTE: This unit is installed on the ship, so you should use two pieces of plastic film (30mmX20mm) supplied with the unit to seal the two holes after remove the screws.
4 WIRING CONNECTION RED WHITE RED Rch WHITE Lch RCA CABLE (GREY) BLUE RED YELLOW BLACK POWER ANTENNA IGNITION SWITCH (ACC+) MEMORY BACK-UP (B+) GROUND (B-) FRONT Lch SPEAKER REAR Lch SPEAKER WHITE WHI.
5 OPERA TION When pull open the disc cover: 12 7 10 18 23 21 22 11 9 1 13 3 25 19 24 14 20 6 15 16 8 2 4 17 5 26.
6 OPERA TION CONTROL & FUNCTIONS KEYS This unit is a marine rated wired r emote control made using a modified contr oller or similar layout. It is capable of operation specified functions on the marine AM/FM/CD receiver and the marine AM/FM/Cassette r eceiver .
7 OPERA TION 4 MODE SELECTION button Press the MODE button (4) to step sequentially thr ough the following sources: e.g. radio mode to CD mode (or cassette mode) to AUX in mode. 5 BAND SELECTION button FOR WEA THER BAND VERSION ONL Y : Press the BAND button (5) to step sequentially thr ough the following bands: FM1, FM2, AM, WX.
8 OPERA TION 1. First insert the hooks on the base into the slots of the holder to install the base to the holder . 2. Select the proper object, then place the r emote mounting bracket on the base and let the object go through the base and the mounting bracket.
9 OPERA TION 3. Align the screw holes on the holder with the scr ew holes on the base and the screw holes on the bracket, then use the two screws (ø4X50) and nuts to fix the bracket, the base and holder to the proper location. 4. Last install the remote contr ol to the holder .
• SWITCHING ON/OFF THE UNIT Switch on the unit by pressing any button (except EJECT (4)). When system is on, press POWER button (9) to turn off the unit.
button (11) or VOLUME button (12) to select USA or European radio fr equency spacing. - USA radio spacing is 200k for FM and 10k for AM. This is the default frequency spacing.
of the LCD display backlight. RESET FUNCTION When you pull out the plastic panel covering the CD opening, you will see the reset button (26) is placed above the disc slot (5).
CD OPERA TION • SWITCHING TO CD MODE If there is no CD inserted in the driver: Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance. The CD will be drawn into the driver automatically . CD playback begins.
for several seconds will exit PGM mode. - When the disc is playing in programmed or der , pressing MEM button (20) for several seconds will cancel the all programmed content and “CLR” appears on the display .
3. SEARCHING FROM ROOT DIRECTOR Y Press the MP3 button (13) thr ee times, the unit searches file or directory fr om root dir ectory by VOLUME / buttons (11&12). (D-DIR icon turns on if the name is a directory). Display will list all available directories and songs.
Note: A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use r ound shape CD discs only for this unit. 2. Do not stick paper or tape, etc, onto the label side or the recor ding side of any discs, as it may cause a malfunction.
17 GENERAL P ower Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm Tone Controls - Bass (at 100 Hz) : ± 10 dB - T r eble (at 10 KHz) : ± 10 dB Maximum Output P ow er : 4 x 50 W atts Current Drain : 15 Ampere (max.
18 TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The ignition switch is not If the power supply is on.
デバイスPYLE Audio PLCD22MRPの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
PYLE Audio PLCD22MRPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPYLE Audio PLCD22MRPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。PYLE Audio PLCD22MRPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。PYLE Audio PLCD22MRPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
PYLE Audio PLCD22MRPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPYLE Audio PLCD22MRPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、PYLE Audio PLCD22MRPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPYLE Audio PLCD22MRPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。