RackmountメーカーCYBER VIEW RP-1020QDの使用説明書/サービス説明書
ページ先へ移動 of 48
.
Contents Chapter 1 Getting Started 1.1 Important Safeguards.........................................................1 1.2 Regulatory Notice...............................................................2 1.3 Before Installation........................
Part 2 4:3 LCD Quad Display Chapter 6 RP-817QD, RP-919QD & RP-1020QD 6.1 Package Contents.............................................................16 6.2 Structure Diagram.............................................................17 6.3 Installation.
P .41 Blank page.
1.1 Important Safeguards Chapter 1 P. 1 Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover ■ Any product, on which the serial number has been defaced, modi fi ed or removed.
P. 2 Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however , no guarantee is given to the correctness of the contents. The information in this document is subject to change without no- tice.
1.5 Optional Accessories ■ It is very important to locate the Rackmount LCD Drawer / Display in a suitable environment. ■ The surface for placing and fi xing the Rackmount LCD Drawer / Display should be stable and level or mounted into a suitable cabinet.
P. 4 1.6 Peripheral Products Chapter 1 Item Model No. Description Matrix Cat6 KVM MU-1602 / MU-1603 / MU-1604 MU-IP1613 / MU-IP1614 / MU-IP1624 MU-3202 / MU-3203 / MU-3204 MU-IP3213 / MU-IP3214 / MU-I.
2.1 Package Contents Chapter 2 P. 5 Rackmount LCD display x 1 pc 6' VGA cable (male to male) x 1 pc User manual x 1 pc Power cord x 1 pc Auto switch power adapter x 1 pc 5 4 2 1 3 U s e r M a n u.
2.2 Structure Diagram Chapter 2 LCD interchangeable module kit 2-in-1 LCD + Quad display membrane Power adapter bracket 1 1 3 2 Front view Rear view 3 2 Power adapter Power cord RP-W819QD & RP-W922QD P.
P. 7 2.3 Installation Chapter 2 ■ Install each screws shown in Figure 1 . Figure 1 . Figure 2 . ■ Fixed the LCD into the rack. * M6 screws is not provided.
P. 8 2.3 Installation Chapter 2 ■ Install each screws shown in Figure 3 . * M6 screws is not provided. Figure 3 . Figure 5 . ■ Push the lower part of the LCD into the rack. RP-W922QD ■ Insert the upper part of the LCD display to the rack shown in Figure 4 .
P. 9 2.4 Connection Chapter 2 Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug- ging and unplugging cables while servers and KVM are powered on may cause irreversible damage of the servers, KVM and Rackmount LCD Drawer .
3.1 Package Contents Chapter 3 P .10 RP-W1 19QD S e t u p V C R S E Q < < < > Q u a d D is p l a y C o n t r o l L C D O S D M e n u 1 4 U s e r M a n u a l 3 2 LCD drawer x 1 pc 6’ VGA .
3.2 Structure Diagram Chapter 3 P. 1 1 RP-W1 19QD LCD interchangeable module kit “One Man” Installation Slides 1 1 2 2 LCD + Quad display membrane Thumb Screw 3 4 3 4.
P .12 3.3 How to Use the Slides Chapter 3 Figure 7 . ■ A black arrow release button is located on the outside of each slide. (shown in Figure 7) . Figure 8 . ■ Pull and hold the black arrow button on either side of the LCD drawer to unlock. (shown in Figure 8) .
P .13 3.4 Connection Chapter 3 Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug- ging and unplugging cables while servers and KVM are powered on may cause irreversible damage of the servers, KVM and Rackmount LCD Drawer .
4.1 LCD Speci fi cations Chapter 4 RP-W922QD, RP-W819QD & RP-W1 19QD Item Description Diagonal Size 19" TFT 22" TFT Max. Resolution 1440 x 990 1680 x 1050 Brightness (cd/m²) 300 300 Color Support 16.
5.1 Dimensions Chapter 5 P .15 Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight RP-W922QD 500.4 x 70.5 mm 19.7 x 2.8" 9U 565 x 539 x 156 mm 22.2 x 21.2 x 6.1" 12 kg 26 lb 15 kg 33 lb RP-W819QD 480 x 71.
6.1 Package Contents Chapter 6 P .16 Rackmount LCD display x 1 pc 6' VGA cable (male to male) x 1 pc User manual x 1 pc Power cord x 1 pc Auto switch power adapter x 1 pc 5 4 2 1 3 U s e r M a n .
6.2 Structure Diagram Chapter 6 P .17 LCD interchangeable module kit LCD + Quad display membrane Power adapter bracket 1 1 3 2 Front view Rear view 3 2 Power adapter Power cord RP-817QD, RP-919QD &.
P .18 6.3 Installation Chapter 6 ■ Install each screws shown in Figure 10 . Figure 10 . Figure 1 1 . ■ Fixed the LCD into the rack. * M6 screws is not provided.
P .19 6.4 Connection Chapter 6 Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug- ging and unplugging cables while servers and KVM are powered on may cause irreversible damage of the servers, KVM and Rackmount LCD Drawer .
7.1 Package Contents Chapter 7 P .20 RP-1 17QD, RP-1 19QD & RP-120QD 1 4 U s e r M a n u a l 3 2 LCD drawer x 1 pc 6’ VGA cable (male to male) x 1 pc User manual x 1 pc Auto switch power adapter.
7.2 Structure Diagram Chapter 7 P .21 RP-1 17QD, RP-1 19QD & RP-120QD LCD interchangeable module kit “One Man” Installation Slides 1 1 2 2 LCD + Quad display membrane Thumb Screw 3 4 3 4.
P .22 7.3 How to Use the Slides Chapter 7 Figure 12 . ■ A black arrow release button is located on the outside of each slide. (shown in Figure 12) . Figure 13 . ■ Pull and hold the black arrow button on either side of the LCD drawer to unlock. (shown in Figure 13) .
P .23 7.4 Connection Chapter 7 Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug- ging and unplugging cables while servers and KVM are powered on may cause irreversible damage of the servers, KVM and Rackmount LCD Drawer .
Item Description LCD Manufacturer Diagonal Size 17" TFT 19" TFT 20" TFT Max. Resolution 1280 x 1024 1280 x 1024 1600 x 1200 Brightness (cd/m²) 300 300 300 Color Support 16.
Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight RP817QD series 480 x 71.5 mm 18.9 x 2.8" 8U 565 x 495 x 156 mm 22.2 x 19.5 x 6.1" 8 kg 18 lb 10 kg 22 lb RP919QD series 480 x 71.5 mm 18.9 x 2.8" 9U 565 x 539 x 156 mm 22.
10.1 On-screen Display Operation Chapter 10 LCD + Quad display membrane P .26 Remarks : ■ Quad Display Control please refer to P .39 - 44 Exit the OSD screen Shortcut key to auto adjustment by press.
P .27 10.2 On-screen Menu Chapter 10 OSD Con fi guration Page Image: T o enter into the brighness, contrast, color temp, red, green, and blue Geometry: T o enter into the auto adjust, H position, V p.
1 1.1 Basic System Connection Chapter 1 1 P .28 1. VCR in : This BNC connector is connected to video output from VCR/DVR. A pre-recorded quad screen signal from a tape can be played back through a VCR/DVR and displayed on the video output channels. Push the VCR button (#2) to switch the device to VCR Playback mode.
1. ALARM I/O : This female type 9 pin D-sub connector is used for alarm sensor input and alarm output control connections. It provides Normal Open and Normal Close contacts for alarm out control. The Alarm Hold T ime can be con fi gured from 0 second to 99 minutes for FIO-8037 / FIO-8134 through system Setup menu.
3 Sensor Activated Alarm The unit is equipped with 4 alarm sensor inputs. If any alarm is activated: ■ the built-in buzzer will be activated. ■ the quad will switch the corresponding channel indicator LED to blinking mode.
1 1.3 Remote Control Connection & Operation Chapter 1 1 hi- z 1 2 3 4 75 IN OUT RS-232 ALARM dc 12V, 1amp monitor vcr I/O RS-232 Cable Wire Computer Remote Keypad Rear Panel P .
The device may be controlled via the male type 9 pin D-sub/RS-232 connector (#13) from a RC-5002 keypad, terminal or computer using ASCII code. Note: Please power off the unit before connecting the Remote Control keypad.
*1. For FIO-8037: in order to control the device to operate in Zoom mode, the computer has to fi rst send command code ” to switch the signal source from camera to VCR/DVR, at this time the device will automatically zoom channel 1 video from VCR/DVR to full screen.
1 1.3 Remote Control Connection & Operation Chapter 1 1 2.3 The con fi guration of the status code for both normal and alarm operations: There are total 2 bytes of the status codes. Byte one, the fi rst 8 bits, shows the current status of the operation modes that the unit is in.
Sensor activated Alarm 0001 = CH1 activated 0010 = CH2 activated 0100 = CH3 activated 1000 = CH4 activated Video Loss Alarm 0001 = CH1 activated 0010 = CH2 activated 0100 = CH3 activated 1000 = CH4 ac.
1 1.4 Quad Display Operation Chapter 1 1 P .36 5 4 2 VCR button (#2) Quad button (#4) CH Select button (#5) Function ON ON OFF Display quad video signal from VCR tape ON OFF Push Once Call up speci .
P .37 1 1.5 Quad Display On-screen Menu Chapter 1 1 Right after the unit is turned on, The monitor will display the last setting on the Setup Menu. CH TITLE QUAD DWELL TIME 03S 1 CH 1 03 S 2 CH 2 03 S 3 CH 3 03 S 4 CH 4 03 S LIVE VIDEO FREEZE ON VIDEO OUT : LIVE QUAD TITLE: ON ON TIME: 23 : 10 : 10 ON ON DA TE: 12 - 25 - 2003 ON ON 1.
2 Page 2 of the setup menu- Alarm Setting Push Setup buttons (#1, #2) simultaneously and push (#1) button again to display page 2 of the setup menu on the screen. This Alarm Setting menu is used to set the desired alarm con fi guration like buzzer , V -loss alarm and V -loss relay .
4: The setup menu can be reset to factory setting by pushing the Setup buttons (#1, #2) and power on the quad simultaneously . The factory setting is as follows: 5. The Quad Display Mode 5.1 Push Quad display button (#4) to switch between Quad screen and Full screen display mode.
1 1.6 VCR Operations Chapter 1 1 Zoom on VCR playback operation: Push VCR button (#2) to ON will switch the device to VCR playback mode. Under this mode, if the device is on quad display mode, a pr-recorded quad display video in the tape will be shown on the screen.
P .41 12.1 DC Power Options Chapter 12 Model 12V 24V 48V Input rating Input voltage: 12-V olt 24-V olt 48-V olt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V Input current - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output rating Output voltage: 12-V olt 12-V olt 12-V olt Output current: 4.
1. How do I adjust the resolution? 13.1 T roubleshooting Chapter 13 To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in Desktop Area.
Blank page.
The company reserves the right to modify product speci fi cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners.
デバイスRackmount CYBER VIEW RP-1020QDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Rackmount CYBER VIEW RP-1020QDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRackmount CYBER VIEW RP-1020QDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Rackmount CYBER VIEW RP-1020QDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Rackmount CYBER VIEW RP-1020QDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Rackmount CYBER VIEW RP-1020QDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRackmount CYBER VIEW RP-1020QDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Rackmount CYBER VIEW RP-1020QDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRackmount CYBER VIEW RP-1020QDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
