Radio Shackメーカー2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDの使用説明書/サービス説明書
ページ先へ移動 of 28
Owner’s Manual Please read before using this equ ipment. 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller ID.
2 Important Information ˆ Important Information This telephone has bee n te sted and fou nd to comply with all applicable UL and FCC stan- dards. READ THIS BEFORE INSTALLATION We have designed your phone to co nform to federal regulations, and yo u can connect it to most telephone li nes.
3 Important Information THE FCC W ANTS Y OU TO KNOW This equipment has been tested a nd found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmfu l inter- ference in a residential install ation.
4 Important Information has been disconnected at the network interface. 6. Use caution when installing or modifyin g telephone l ines. 7. Do not fix the AC power supply cord to building surfaces with me tal fittings (if the product has an AC power cord).
5 Important Information 18. Avoid using a telephone (other than a cordless type) during an e lectrical storm. There may be a remo te risk of electric shock from lightning. 19. Do not use the telephone to report a gas leak in the vicinity o f the leak.
6 Contents ˆ Contents Features ........... .............. ................. ................. .............. ................ ................. ............ .. .......... 8 Installation ....... .............. ................. ................. .....
7 Contents T esting Stored Emergency Numbers .................. ................. ................. ................. .. 23 Reviewing Memory Numbers (Handset Only ) .............. ................. ................. ................ 23 Dialing a Memory Number .
8 Features ˆ Features Your RadioShack 2.4 GHz 2-Line Digita l Spread Spectrum Cordless Speakerphone uses advanced cordless telep hone te chnolo- gy to give you superior audio qu ality and ex- tended range. Th e phone lets you pl ace and receive calls on two separate telephone lines.
9 Features Line Status In dicators — show if a line is available, in use, or on hold. Headset Jack — lets you make or answer calls with handsfree convenie nce using an optional headset. Auto Talk — you can set the phone so you can answer a call b y just lifting the handset from the base.
10 Installation ˆ Installation MOUNTING THE PHONE You can place the phone’s base on a desk or table, or mount it on a standard wall plate or directly on a wall.
11 Installation On a Desk T op 1. Insert the bracket’s tabs into the base’s upper tab slots, then press down on th e bracket’s clips and insert them into the clip slots. 2. T o connect the phone to a tw o-line phone jack , plug one end o f the supplied long two-line modular cord into the TEL LINE 1/2 jack on the back of the phone.
12 Installation secure it. If you are using two phone cords, plug the second cord into the sec- ond phone jack. 6. Plug the adapter into a standa rd AC out- let. 7. Press and lift out the handset holder , flip it over , then snap it back into plac e. 8.
13 Installation • If the handset’s display is blank and the phone does not work, recharge the bat- tery pack. (T he battery power might be too low to light the display .) • If the battery pack becomes weak during a call, the handset beeps eve ry 3 sec- onds and Bem Be m Be m Be m 8Wjj[ho 8Wjj[ho 8Wjj[ho 8Wjj[ho flashes.
14 Installation Note: The phone e xits setting mode if a call or page is received , or if yo u press LINE 1 or LINE 2 . ADJUSTING THE RINGER The phone lets you contro l its base and handset ringer volume separa tely. You can choose from a high or low ringer setting or turn the ringer off for the base and the hand- set.
15 Installation 3. A menu appears with 7kje 7kje 7kje 7kje JWb a JWb a JW b a JWb a selected. Press CONF / 9 9 9 9 to select 9?:9M 9?:9M 9?:9M 9?:9M , then press SELECT / CH to change the setti ng. Ed Ed Ed Ed or E E E E appears indicating the selecte d setting.
16 Basic Operation ˆ Basic Operation Note: You can use the ke ypad on either the handset or the base to o perate the phone. To make a call with the speakerphone, you must use the base’s keypad; to make a call with the handset, you must use th e handset’s keypad.
17 Basic Operation pear on the handset’s d isplay as a reminder that the line is in use. If either line indicator i s flashin g, someone at the handset is using the line. Press the line button for a line that is not in use. To end a speakerph one call, simply press LINE 1 or LINE 2 .
18 Basic Operation USING BOTH THE HANDSET AND SPEAKERPHONE To use the handset to join a call a t the base, or to use the base to j oin a conversation at the handset, press the line button for th e line in use. You hear a busy tone: before the tone ends, press the line button again .
19 Basic Operation USING THE PHONE WITH EXTENSION PHONES The phone detects whe n an extension phon e is in use. The corresponding line indicator flashes on the base and ?d ?d ?d ?d Ki[ Ki[ Ki[ Ki[ flashes on the handset’s display along with B_d[ B_d[ B_ d[ B_d[ ' ' ' ' or B_d[ B_d[ B_d[ B_d[ ( ( ( ( .
20 Basic Operation Note: The pagin g ends in one minute if no- body answers. Press INTERCOM or 8 8 8 8 / IN- TCM again. To end an intercom cal l, press 8 8 8 8 / INTCM or INTERCOM . During a call, yo u can page someone at e i- ther the base or the handset to jo in the con- versation.
21 Memory Dialing ˆ Memory Dialing You can store up to 30 numbers in the hand- set’s memory and another 10 in th e base’s memory, then dial a stored number by press- ing a memory location number. You can also store a name with each number in the hand- set’s memory.
22 Memory Dialing 6. Press SELECT / CH . Ijeh[ Ijeh[ Ijeh[ Ijeh[ DkcX[h DkcX[h DkcX[h DkcX[h appears. 7. Enter the number and any tone an d pause entries (see “Usin g T o ne Services on a Pulse Line” o n Page 19 and “Enter- ing a Pause”). Note: Each tone or pause entry uses one digit of memory .
23 Memory Dialing To enter a 2-second pause, press RED IAL / P AUSE . The handset display shows F F F F for pause entry. For a longer pause, repeatedly press REDIAL / PA U S E .
24 Caller ID Operation (Handset Only) ˆ Caller ID Operation (Handset Only) If you subscribe to Caller ID service from your phone company, the phone company sends information about the call, as well as the time and da te, betwe en the first and sec- ond rings of every call you receive.
25 Caller ID Operation (Handset Only) ADDING/DELETING THE AREA CODE When the area code of the received call is the same as the one you stored (see “Storing Your Area Code” on Page 15), the caller ID record does not show the area code. If it is different, the record shows the area code.
26 Troubleshooting ˆ T roubleshooting We do not expect you to have any proble ms with your phone, but if you do, the following sug- gestions might help. Problem Suggestion The phone does not work or works poorly . Be sure the base’s phone line cord and AC adapter are cor- rectly and securely connected.
27 Troubleshooting If you still have problems, discon nect the phone. If other phones on the same line work proper- ly, the fault is in this phone or its installation. If you can not find the problem, take your pho ne to your local RadioShack store for assistance.
43-1704 UCZZ01753BZ 08A01 Printed in China RadioShack Corporation Fort Worth, Texas 76102 Limited One-Y ear W arranty This product is warranted by RadioShack against manufactu ring defects in material.
デバイスRadio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRadio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRadio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRadio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller IDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
