RCAメーカー25202の使用説明書/サービス説明書
ページ先へ移動 of 38
T wo-Line Speakerphone with Call W aiting Caller ID User’ s Guide Please read this manual before operating this product for the first time. T OCOM 162 1 137 0 Model 2520 2.
2 Equipment Approval Information Y our telephone equipment is approved for connection to the P ublic Switched T elephone Network and is in compliance with parts 15 and 68, FCC R ules and Regulations and the T ec hnical Requirements for T elephone T erminal Equipment published by ACT A.
3 SEE MARKING ON BOTTOM / BACK OF PRODUCT RISK OF ELECTRIC SHOCK DO NOT OPEN W ARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NO T EXPOSE THIS PRODUCT T O RAIN OR MOISTURE. THE LIGHTNING FLASH AND ARROW HEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF “DANGEROUS VOL T AGE” INSIDE THE PRODUCT .
4 C ALLER ID ..................................... 22 C ALLER ID (CID) ........................................ 22 S UMMARY S CREEN ........................................... 22 R ECEIVING AND S T ORING CID R ECORDS ............ 22 R EVIEWING CID R ECORDS .
5 Introduction CAUTION: When using telephone equipment, there ar e basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS pr ovided with this product and save them for future r eference.
6 Connections and Setup Base Layout DELETE EXIT SELECT/SAVE DIAL STORE MENU DIRECTORY NEW CALL CONFER LINE 2 LINE 1 VOI CE MAIL 1 VOI CE MAIL 2 DND PAUS E REDIAL VOLUME FLASH HANDSET SPEAKER MUTE HOLD 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 INTERCOM/MEMORY LOG MEM.
7 Handset cord Line cords AC power converter Modular telephone line jack W all plate Base Handset Connections and Setup P arts Checklist Make sure your package includes the following items: T elephone.
8 Connections and Setup Installing the Phone 1. Choose an area near an electrical outlet and telephone wall jack. Y our phone should be placed on a level surface, such as a table top or desk. 2. Install 3 AA-size alkaline batteries (not included) for back up power in the event of a power failure.
9 Connections and Setup If you have two telephone lines installed on a single jack, plug one end of the straight telephone line cor d into the jack marked LINE 1+2 on the back of the base.
10 Connections and Setup Data P ort This phone has a DAT A PORT jack to connect an auxiliary phone device, such as a fax machine, computer modem, answering machine, or even a cordless phone. The DAT A PORT switch on the back of the phone controls the DA TA PORT jack so you can choose line 1 or line 2.
11 Connections and Setup Programming the T elephone Display Language Y ou may set the display language to English, French, or Spanish. The default is English. 1. Press the MENU button. LANGUAGE is displayed 2. Press SELECT . 3. Use the REVIEW or button to select the language.
12 Connections and Setup Flash Time Depending on the services you have with the phone company , you may need to adjust the flash timing. It can be set from 1 00ms or 600ms. The default is 600ms. 1. Press the MENU button. 2. Use the REVIEW or to scroll to PHONE OPTIONS .
13 Connections and Setup Call Alert Tone When the call alert tone is turned ON, you hear a call alert tone when you are on the phone and you receive a call on the other line. If you pr efer to have incoming calls not interrupt or disturb your ongoing conversation, set the Call Alert T one to OFF .
14 Connections and Setup Regional Area Codes Depending on your area, you may need to set r egional area codes. These ar e needed in order for the phone to determine the number format to display when a valid CID signal is r eceived. Calls r eceived that match any of the regional ar ea codes display as 10 digits.
15 Connections and Setup V oice Mail Access Codes Y ou can program a voice mail access code for each telephone line for quick access to your voice mail. 1. Press the MENU button. 2. Use the REVIEW or button to scroll to VM CODE . 3. Press SELECT .
16 T elephone Operation T elephone Operation Making Calls with the Handset 1. Pick up the handset and the phone automatically selects an open line. 2. Wait for a dial tone. 3. Dial a phone number . 4. Hang up the handset when finished. Making Calls with the Speakerphone 1.
17 T elephone Operation Receiving Calls with the Handset When the phone rings, the corresponding line’ s indicator flashes rapidly . 1. Pick up the handset (your phone automatically selects the ringing line). 2. When you are finished, hang up the handset.
18 T elephone Operation Pre-Dialing Telephone Numbers Pre-dialing lets you to enter , check , and edit a telephone number befor e engaging the line. There ar e several ways to pre-dial a telephone num.
19 T elephone Operation Hold Placing a Call on Hold 1. Press HOLD. The indicator for the line on hold flashes gr een. 2. Hang up or press another line button. Releasing a Call from Hold Press the line button for the call on hold. The phone automatically goes into speakerphone mode.
20 T elephone Operation Ringer V olume While the handset is on the cradle tap the VOLUME or button to incr ease or decrease the ringer loudness.
21 T elephone Operation 2. Use the REVIEW or button to select the duration. Y ou may choose from 15 minutes, 30 minutes, 45 minutes, 1 hour , or 2 hours and increase the dur ation by 1 hour intervals up to 24 hours. 3. Press the SELECT button to save your selection.
22 Caller ID Caller ID (CID) Summary Screen The summary screen shows the curr ent time, current date and number of new calls to be reviewed. It is displayed until any button is pr essed. Within 1 0 seconds of receiving a new call, the new caller information is displayed and the green NEW CALL indicator turns on.
23 Caller ID Reviewing CID Records •P r ess the REVIEW or to scr oll the call recor ds. NOTE: When you scroll to the start/end of the list, ST ART /END appears in the display . Saving CID Records to Memory/Phone Directory Memory 1. While a name and telephone number shows in the display , press SELECT if you want to edit the information.
24 Caller ID 3. To adjust the phone number format, use the REVIEW or button For instance, a 7-digit local number sometimes cannot be dialed because it requir es a 1 0-digit or 1 1- digit format. Use the REVIEW or button to scr oll through 7, 1 0, and 1 1-digit numbers.
25 Memory Direct Access Memory & Directory Memory Storing a Name and Number in Memory 1. Press the ST ORE button. ENTER NUMBER shows in the display .
26 Memory 1. Press a MEMORY button to r eview the recor d stored in Direct Access Memory . Changing a Stored Name or Number 1. Press DIRECT ORY . 2 . Use the REVIEW or button to scr oll to the desired memory . 3. Press SELECT and edit the content accor ding to the steps in the Storing a Name & Number in Memory section.
27 Memory Dialing a Stored Number If the number is stored in the Dir ectory Memory , 1. Pick up the handset, or press SPEAKER or HEADSET . 2. Wait for the dial tone. 3. Press the DIRECT ORY button, and use the REVIEW or button to find the number .
28 Memory Deleting All Directory Memory This feature allows you to clear all memory saved in the dir ectory at once. 1. Press the MENU button. 2. Use the REVIEW or buttons to scroll to PHONE OPTIONS 3. Press SELECT . CLEAR ALL MEM shows in the display .
29 Other Information Display Messages The following special messages indicate the status of a message or the unit: NO CALLS The CID memory log is empty . UNKNOWN CALLER The incoming call does not have CID service or their service ar ea is not linked to yours.
30 Other Information Y ou cannot be heard by the other party . • Make sure the handset or headset cor d is connected properly and secur ely . • Make sure MUTE is not turned on. Phone does not ring. • Make sure the ringer is turned on. •Y ou may have too many extension phones on your line.
31 Other Information General Product Care To keep your telephone working and looking good, follow these guidelines: • Avoid putting the phone near heating appliances and devices that gener ate electrical noise (for example, motors or fluor escent lamps).
32 Other Information Service If trouble is experienced with this equipment, for r epair or warranty information, please contact customer service at 1-800-51 1-3 180 . If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is r esolved.
33 Other Information Limited Warranty What your w arr anty covers: • Defects in materials or workmanship. Fo r how long aft er your purchase: • One year , from date of purc hase. (The war ranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whic hever comes first.
34 Other Information Limitation of W ar ranty: • THE W ARRANTY ST A TED ABOVE IS THE ONL Y WARRANTY APPLICABLE TO THIS PRODUCT . ALL O THER W ARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED W ARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A P AR TICULAR PURPOSE) ARE HEREB Y DISCLAIMED.
35 Index A Accessory Order Form 37 B Base Layout 6 C Call Alert Tone 13 Call Timer 18 Call Waiting Caller ID 24 Caller ID (CID) 22 Chain Dialing 27 Changing a Stored Name or Number 26 Conference 20 Co.
36 R Receiving and Storing CID Records 22 Receiving Calls with the Handset 17 Receiving Calls with the Optional Headset 17 Receiving Calls with the Speakerphone 17 Redial 19 Regional Area Codes 14 Rem.
37 ® r r s TM Charge your order on your VISA, MasterCard, or Discover Card by filling in below USE YOUR CREDIT CARD IMPORTANT: Copy complete account number from your VISA card IMPORTANT: Copy comp.
Visit the RCA web site at www .rca.com Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. ATLINKS USA, Inc. 10 1 West 1 03rd Street Indianapolis, IN 46290 ©2003 ATLINKS USA, Inc.
デバイスRCA 25202の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
RCA 25202をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRCA 25202の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。RCA 25202の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。RCA 25202で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
RCA 25202を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRCA 25202の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、RCA 25202に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRCA 25202デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
