RCAメーカーCC6394の使用説明書/サービス説明書
ページ先へ移動 of 128
Camcor der User’ s Guide Changing Entertainment. Again. CC6384/CC6394.
T o reduce risk of injury , charge only rechargeable batteries recommended by the manufacturer for this product. Other types of batteries may burst causing damage and personal injury . FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’ s authority to operate it.
1 T able of Contents T able of Contents (continued on the next page) Chapter 1: Connections & Setup Parts Checklist ......................................................................................... 6 Buttons and Controls ..................
2 T able of Contents Recording and Playback Icons ....................................................... 31 Other Icons ..................................................................................... 35 Chapter 3: Recording Recording Details ..
3 T able of Contents (continued on the next page) Index ............................................................................................... 65 Index Playback ................................................................................ 66 Protecting Images .
4 T able of Contents Things to A void ............................................................................ 105 T raveling Tips ...................................................................................... 106 Specifications ..........
Chapter 1 Connections & Setup Chapter Overview: • Parts Checklist • Buttons and Controls • Getting Started • Powering the Camcorder • Using the Shoulder Strap • Setting the Date and Time • Setting the Recording Format • Setting the T ape Recor ding Speed • Setting the T ape Length 5 Changing Entertainment.
6 Chapter 1 Connections & Setup Shoulder strap Part # ACS091 D I G I T A L ( D S C I N / O U T ) D S C S T O P R R E T A K E F L I G H T O F F A U T O O N C O U N T E R R / M F A D E / W I P E P .
Connections & Setup Chapter 1 7 M E N U / B R I G H T / T R A C K I N G S N A P S H O T V O L S TEA D Y P IX /TB C + + D I G I T A L ( D S C I N / O U T ) P L A Y O F F A M S T O P R R E T A K E F L I G H T O F F A U T O O N C O U N T E R R / M F A D E / W I P E P .
8 Chapter 1 Connections & Setup S T O P R R E T A K E F L I G H T O F F A U T O O N C O U N T E R R / M F A D E / W I P E P . A E D I G I F E C T C H A R G E V I D E O R E F R E S H E J E C T Camc.
Connections & Setup Chapter 1 9 Getting Started This section describes the basics on how to set up your camcorder to record for the first time. Refer to the other sections for detailed operation and feature options. Unpack the camcorder and accessories • The items shown are packed with the camcorder .
10 Chapter 1 Connections & Setup M E N U / B R I G H T / T R A C K I N G S N A P S H O T V O L S T E A D Y P I X / T B C + + D I G I T A L ( D S C I N / O U T ) P L A Y O F F A M S T O P R R E T A K E F L I G H T O F F A U T O O N C O U N T E R R / M F A D E / W I P E P .
Connections & Setup Chapter 1 11 2 1 DC IN jack AC power supply M E N U / B R I G H T / T R A C K I N G S N A P S H O T V O L S T E A D Y P I X / T B C + + D I G I T A L ( D S C I N / O U T ) P L A Y O F F A M S T O P R R E T A K E F L I G H T O F F A U T O O N C O U N T E R R / M F A D E / W I P E P .
12 Chapter 1 Connections & Setup T ur n on the camcorder Set the Power switch to the desired setting, either automatic ( A ) or manual ( M ) record mode, powered off (OFF), or in playback mode ( ). The VIDEO indicator comes on when the camcorder is turned on.
Connections & Setup Chapter 1 13 Insert a cassette tape 1. Make sure the camcorder is connected to a power supply. 2. Open the LCD monitor fully or adjust the viewfinder . 3. With the camcorder set to A (automatic record), slide the EJECT switch until the cassette tape holder opens.
14 Chapter 1 Connections & Setup Use the LCD monitor or viewfinder to see what ’ s recor ding Using the LCD monitor 1. Remove the lens cap. 2. Open the monitor 90˚ from the camcorder body. 3. Tilt the monitor 180˚ forward or 90˚ down as required for convenient viewing while recording.
Connections & Setup Chapter 1 15 Start recor ding 1. Remove the lens cap. 2. Set the Power switch to A (automatic record). (The VIDEO indicator comes on.) 3. Press and release the Recording Start/Stop button to start recording. ( REC appears in the viewfinder or LCD monitor (but won’t show up in the recording)).
16 Chapter 1 Connections & Setup T ur n off the camcor der 1. Set the Power switch to OFF . 2. Close the LCD monitor . Powering the Camcor der Y ou can power your camcorder with a battery or AC power . Charging the Battery 1. Set the Power switch to OFF .
Connections & Setup Chapter 1 17 Approximate charging time Approximate r ecording time (in minutes) Note: Recording time is reduced significantly when you use the Zoom or Record- Standby modes repeatedly or when you use the LCD monitor repeatedly .
18 Chapter 1 Connections & Setup Removing the Battery Slide the BA TTERY RELEASE switch and pull out the battery pack. Refreshing the Battery If you charge a battery before it has been fully discharged, the battery’s capacity may be reduced over time.
Connections & Setup Chapter 1 19 Battery Level Icon The battery level icon appears in the viewfinder or LCD monitor and reveals the amount of power left in the rechargeable battery. Note : The battery level icon is not recorded on the tape. This icon appears when battery is fully charged.
20 Chapter 1 Connections & Setup Using the Power Supply The power supply attaches to the camcorder and lets you power it directly from standard household power . The power supply operates on 110-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or rechar ge the battery.
Connections & Setup Chapter 1 21 Using the Shoulder Strap The camcorder’s shoulder strap is designed to let you carry the camera from your shoulder and – when ready– bring the camcorder to shooting position in one quick movement. 1. Following the illustration, thread the strap through the eyelet.
22 Chapter 1 Connections & Setup Setting the Date and Time Y ou need to set the date and time before they can be displayed. Date and time information is recorded onto the tape at all times, but its display can be turned on or off during playback (see page 89).
Connections & Setup Chapter 1 23 Setting the Recor ding Format (for CC6394 only) Y ou need to select what kind of tape you are using or type of recording you wish to perform.
24 Chapter 1 Connections & Setup Additional Notes about S-VHS and S-VHS ET Cassette T apes • Use S-VHS tapes for storing recordings for an extended period or for recording important scenes, as they enable higher-quality recording and playback. • With some tapes, better picture quality may not be obtained even with S-VHS ET recording.
Connections & Setup Chapter 1 25 Setting the T ape Recording Speed Y ou need to select the tape recording speed for the quality of recording you want. 1. Set the Power switch to M (manual record). (The VIDEO indicator comes on.) 2. Press the MENU dial in.
26 Chapter 1 Connections & Setup Setting the T ape Length Y ou need to select the tape length so that the camera can alert you how much time you have left on the tape. 1. Set the Power switch to M (manual record). (The VIDEO indicator comes on.) 2.
27 Chapter 2 Using the Monitors Chapter Overview: • Seeing What Y ou Are Recor ding • On-screen Icons Changing Entertainment. Again..
Using the Monitors 28 Chapter 2 180 ° 90 ° Seeing What Y ou Ar e Recording T o see what is recording, use either the LCD monitor or the viewfinder monitor . When the LCD monitor is open more than 25˚, the viewfinder turns off. When you close the LCD monitor , the viewfinder turns on.
Using the Monitors Chapter 2 29 Using the Viewfinder The camcorder’s viewfinder is a miniature monitor that displays in black and white (color for the CC6394). For convenient viewing, rotate the viewfinder up or down. Note : When the LCD monitor is open more than 25 ˚ , the viewfinder turns off.
Using the Monitors 30 Chapter 2 Recording Menu Icons Playback Menu Icons W ar ning Icons Indicates the amount of power left in the rechargeable battery.
Using the Monitors Chapter 2 31 TAPE END LENS CAP E01-E06 Condensation: CONDENSA TION, OPERA TION P AUSED PLEASE W AIT appears if moisture occurs inside the camcorder . When this icon appears, wait at least one hour before using the camcorder again. End of Cassette: Appears when a tape reaches its end during recording or playback.
Using the Monitors 32 Chapter 2 Special Effect Icons Appears when you select SEPIA to give your recordings a brown- tone like old photographs. Appears when you select SPORTS to record fast-moving action, such as sporting events. Appears when you select SD:SHADOW to darken the picture and reduce glare.
Using the Monitors Chapter 2 33 Preset Titles • The preset title selected in the TITLE menu appears here. It will be recorded on the tape when it appears. M. W . B. (Manual White Balance) Icons The icon for the manual white balance selected in the M.
Using the Monitors 34 Chapter 2 Appears when you use the zoom lever . Zoom Icon 4X Bright and V olume Icons BRIGHT VOLUME Exposure Icon +03 B K Fade and Wipe Icons Press the F ADE/WIPE button to display the icon for the fade or wipe you want to select.
Using the Monitors Chapter 2 35 Appear when you are adjusting focus manually using the FOCUS menu. The icons also flash when the auto-focus system cannot operate properly or you can’t adjust the focus any farther . These icons flash while you adjust manual focus (see page 86).
Using the Monitors 36 Chapter 2 Appears when the time base corrector is turned on (see page 48). Appears during playback. It is not recorded. An M appears in front of the time counter when memory-stop is on (see page 49). Indicates the approximate time remaining on the tape.
Chapter 3 Recor ding Chapter Overview: • Recording Details • Recording Tips 37 Changing Entertainment. Again..
Recording 38 Chapter 3 Recording Details 1. Remove the lens cap. 2. Set the Power switch to A or M (automatic record or manual record mode). (The VIDEO indicator comes on.) 3. Open the LCD monitor or adjust the viewfinder . 4. Press and release the Recording Start/Stop button to start recording.
Recording Chapter 3 39 Self-Recording Y ou can shoot yourself while viewing your own image in the LCD monitor . Open the LCD monitor and tilt it upward 180 ° so that it faces forward, then point the lens toward yourself and start recording. Quick Review Y ou can check the end of the last recording.
Recording 40 Chapter 3 Digital and Optical Zooming Y ou can zoom in and out for close-up or wide-angle shots by moving the zoom lever on the camcorder . The camcorder automatically focuses at most distances when zooming. Optical zooming is possible up to 16 times, and digital zooming allows up to 400 times normal magnification.
Recording Chapter 3 41 Using Digital Zoom Y ou can use digital zoom to magnify images to a maximum of 400 times normal magnification. 1. Set the Power switch to M (manual record). If the DSC indicator is on, press REFRESH for approximately 1 second to select VIDEO.
Recording 42 Chapter 3 Using the Video Light T o brighten the scene when natural lighting is too dim, the camcorder uses a built-in video light. Y ou can tur n on the video light at all times, set to turn on automatically when the camcorder senses additional light is needed, or turn off altogether .
Recording Chapter 3 43 Cautions • Never operate the video light closer than 1 foot to people or other objects. • The video light becomes very hot. Do not touch it during use or right after use. Serious injury may result. • Do not place the camcorder in a carrying case right after using the light.
Recording 44 Chapter 3 Recording T ips • T o improve picture quality and color reproduction, try to make sure indoor scenes are well-lit. • Don’t move the camcorder rapidly from side-to-side while recording. A steady, gradual “pan” avoids blurring and “jitter”.
Chapter 4 Playback Chapter Overview: • Playback Options • Choose Y our Connection 45 Changing Entertainment. Again..
Playback 46 Chapter 4 Playback Options The camcorder’s playback features include displaying still images an d high-speed shuttle search. In this section, you’ll also learn how to connect your camcorder to a TV , VCR, or computer . Play back fe atur es (Play, Pause, Forward, Reverse, Sto p) can be handled using the camcorder’s buttons.
Playback Chapter 4 47 • If a blank portion on the tape is played back, the screen may become black. This is not a malfunction. • LCD monitor/viewfinder indications: • When power is supplied from a battery appears. When power is supplied through the power supply , does not appear .
Playback 48 Chapter 4 Adjusting the T racking Y ou may need to eliminate noise bars that appear on-screen during playback. The default setting is Auto Tracking. 1) Press in the TRACKING dial for approximately 2 seconds. (MT appears). 2) Rotate the TRACKING dial until the noise bars disappear .
Playback Chapter 4 49 Using Counter Memory Counter Memory makes it easier to locate a specific tape segment. 1. Press and hold the COUNTER R/M button for more than 1 second. (The counter resets to 0:00:00 .) 2. Press COUNTER R/M for less than 1 second.
Playback 50 Chapter 4 Shuttle Search Shuttle search allows high-speed searching in either forward or reverse directions. 1. Press or during playback. 2. T o resume normal playback, press / . • During playback, press and hold or . The search continues as long as you hold down the button.
Playback Chapter 4 51 Choose your Connection This manual includes information for some basic types of connections. Y ou may also need to refer your TV and VCR user’s guides for specific instructions. Using the Cassette T ape Adapter Before choosing a connection, you may find it easier to use the cassette tape adapter .
Playback 52 Chapter 4 Inserting the T ape into the Cassette T ape Adapter 1. Before inserting the tape into the adapter , remove any slack in the tape by turning the tape wheel on the side of the tape. 2. Slide EJECT to the right to open the tape compartment lid.
Playback Chapter 4 53 Removing the T ape from the Cassette T ape Adapter 1. Slide the adapter’s EJECT switch to the right. The load detector extends from the side and the whirring sound indicates the tape is being released before the adapter’s tape compartment lid opens.
Playback 54 Chapter 4 Connecting to a TV (or VCR) with Audio/Video Input Jacks T o connect your camcorder to a TV monitor (or VCR) with audio/video input jacks, you need an optional audio/video cable, such as VH83 (see page 117) .
Playback Chapter 4 55 Playback on a TV (or VCR) with Audio/Video Input Jacks 1. Turn on the TV and tune it to the video input channel or turn on VCR and place it in the “line” or “camera mode”. (If your VCR does not have a “line” or “camera mode”, consult the VCR owner’s manual.
Playback 56 Chapter 4 T ape Dubbing 1. Following the illustration in this chapter , connect the camcorder and the VCR. 2. Set the camcorder’s Power switch to , turn on the VCR’s power , and insert the appropriate tapes in the camcorder and the VCR.
Chapter 5 Digital Still Camera Chapter Overview: • Digital Still Camera Recording and Playback • System Requirements for Pictur e Navigator • Connecting to a Windows ® PC 57 Changing Entertainment.
Digital Still Camera 58 Chapter 5 Digital Still Camera Recor ding and Playback When using the Digital Still Camera (DSC) feature, still pictures are recorded in the camcorder’s built-in memory. These pictures can be transferred to a PC, saved, and edited using the included cable and software.
Digital Still Camera Chapter 5 59 DSC STOP R RETAKE F LIGHT OFF AUTO ON C O U N T E R R / M F A D E / W I P E P . A E D I G I F E C T CHARGE VIDEO REFRESH EJECT VIDEO indicator Power switch M E N U / .
Digital Still Camera 60 Chapter 5 Selecting a Snapshot Mode Y ou can choose from 4 ways to display your digital pictures, including full, pin-up, multi-4, and multi-9. 1. Set the Power switch to M (manual record). The VIDEO or DSC indicator comes on. 2.
Digital Still Camera Chapter 5 61 • Select FULL to take a full screen snapshot with no frame. • Select PIN-UP to have the snapshot framed like a picture. • Select MULTI-4 to take four snapshots in a quick progression (giving the illusion of movement) and place all four snapshots within one shot.
Digital Still Camera 62 Chapter 5 T aking Snapshots 1. Remove the lens cap. 2. Set the Power switch to M or A (manual or automatic record). (The VIDEO or DSC indicator comes on.) 3. If the DSC indicator is not on, press the REFRESH button for approximately 1 second.
Digital Still Camera Chapter 5 63 Quick Review (to check the last shot stored in the built-in memory) 1. Set the Power switch to M or A (manual or automatic record). (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESH for approximately 1 second.
Digital Still Camera 64 Chapter 5 Normal Playback The snapshots you take are automatically numbered, then stored in numerical order in the built-in memory. Y ou can view them using the Index and Slideshow features. 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.
Digital Still Camera Chapter 5 65 Slide Show Y ou can automatically look at all the snapshots stored in memory in numerical order . 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESH for approximately 1 second.
Digital Still Camera 66 Chapter 5 : Protect icon When an image is protected against accidental erasure, the padlock icon appears next to the picture mode icon. Selected Image The image you have selected is highlighted with a box. Rotate the MENU dial to move the box to another image.
Digital Still Camera Chapter 5 67 Protecting Images The Protect mode helps prevent images from being erased. When the padlock icon appears next to the Picture Mode icon, that image can’t be deleted. 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.
Digital Still Camera 68 Chapter 5 Unprotecting Images 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESH for approximately 1 second. (The DSC indicator comes on and a snapshot stored in memory is displayed.
Digital Still Camera Chapter 5 69 Deleting Images Y ou can delete your snapshots one at a time or all at once. Deleting Select Images 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESH for approximately 1 second.
Digital Still Camera 70 Chapter 5 Initializing the Built-in Memory External noise and interference (from a TV , a radio, etc.) might prevent your camcorder from functioning properly. If images can’t be stored or deleted, you may need to initialize the memory.
Digital Still Camera Chapter 5 71 Deleting All Images 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESH for approximately 1 second. (The DSC indicator comes on and a snapshot stored in memory is displayed.
Digital Still Camera 72 Chapter 5 System Requir ements for Pictur e Navigator • 66 MHz or faster (Pentium recommended) for Microsoft ® * Windows ® * 98 or later • CPU 468DX2/50 MHz or faster for.
Digital Still Camera Chapter 5 73 Connecting T o A Windows ® PC Image data stored in the camcorder’s built-in memory can be transferred to a W indows ® PC and saved using the image transfer software, Picture Navigator . T o assure safety, make sure all units are turned off before making any connection.
Digital Still Camera 74 Chapter 5 Notes: • Before transferring snapshots from your personal computer to the camcorder ’ s built-in memory , check that the desired Picture Mode has been selected for the images (see page 60). The snapshots will be transferred from the personal computer in the selected Picture Mode.
Chapter 6 Advanced Featur es Chapter Overview: • Using the Menus for Advanced Adjustment • Menu Definitions • Using the Advanced Features 75 Changing Entertainment.
Advanced Features 76 Chapter 6 Using the Menus For Advanced Adjustment This camcorder is equipped with an on-screen menu system that simplifies many of the more detailed camcorder settings.
Advanced Features Chapter 6 77 Menu Definitions The following charts will help you get acquainted with the various menus and some brief definitions of their features. For more detailed explanation, refer to the corresponding sections. System Menu This menu can’t be accessed while recording.
Advanced Features 78 Chapter 6 Factory Preset: Doesn’t display black bars. Allows you to record black bars at the top and bottom of the screen to produce a cinema-like wide-screen effect. If you take a snapshot in the 16x9 mode, the snapshot is recorded without the black bars.
Advanced Features Chapter 6 79 Allows you to select the language (ENGLISH, FRENCH, or SP ANISH) of Instant Titles ( see page 90 ). Allows you to set the current date and time ( see page 22 ). Factory Preset: Demonstrates certain functions automatically.
Advanced Features 80 Chapter 6 DSC STOP R RETAKE F LIGHT OFF AUTO ON C O U N T E R R / M F A D E / W I P E P . A E D I G I F E C T CHARGE VIDEO REFRESH EJECT VIDEO indicator Power switch M E N U / B R.
Advanced Features Chapter 6 81 Wipes SHUTTER Wipes in as a black screen fr om the top and bottom, closing over the image like a shutter . Wipes out as a new image, pushing open the black screen vertically from the center . SLIDE Wipes in as a black screen moves in from the left to gradually cover the image.
Advanced Features 82 Chapter 6 Program AE With Special Ef fects 1. Set the Power switch to M (manual record). 2. Press REFRESH for approximately 1 second to select VIDEO or DSC. 3. Press P .AE r epeatedly until the desired mode’s name and icon appear .
Advanced Features Chapter 6 83 2 S1/2000 (1/2000 sec. High Speed Shutter) Captures faster action than Sports mode. Notes: • The screen becomes slightly dark in the High Speed Shutter mode.
Advanced Features 84 Chapter 6 NEGA POSI (Negative Positive) The colors of a picture are reversed. MOSAIC Turns recorded scenes into a mosaic pattern. STRETCH Doubles the width of the picture horizontally. Note: Digital Effects can be changed during recording or during Record-Standby .
Advanced Features Chapter 6 85 Notes: • T o return to the factory setting, select AUTO in step 5. • T o readjust exposure, repeat the procedure from step 3. Focusing Auto Focus The camcorder’s Full Range automatic focus system offers continuous shooting ability from close-up to infinity.
Advanced Features 86 Chapter 6 Manual Focus Make the necessary viewfinder adjustments to use the viewfinder ( see page 29 ). 1. Set the Power switch to M (manual record). Press REFRESH for approximately 1 second to select VIDEO or DSC. 2. Press the MENU dial in.
Advanced Features Chapter 6 87 White Balance Adjustment White balance refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically.
Advanced Features 88 Chapter 6 Manual White Balance Perform Manual White Balance when shooting under various types of lighting. 1. Follow steps 1 through 4 of the white balance adjustment, and highlight MWB . 2. Hold a sheet of plain white paper in front of the subject.
Advanced Features Chapter 6 89 Date/Time Insert Y ou can display the date and time in the camcorder or on a connected TV , as well as to record them manually or automatically. Y ou should have already perfor med the Date/Time Setting procedure ( see page 22 ).
Advanced Features 90 Chapter 6 Instant Titles The camcorder has 8 preset titles in memory. Y ou can superimpose one of them over the video image. Instant Titles can be displayed in English, French, and Spanish. 1. Set the Power switch to M (manual record).
Advanced Features Chapter 6 91 Animation Y ou can shoot a series of pictures, each slightly different, of the same object for a brief period of time. 1. Set the Power switch to M (manual record). If the DSC indicator is on, press REFRESH for approximately 1 second to select VIDEO.
Advanced Features 92 Chapter 6 Time-Lapse Y ou can recor d sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time. 1. Set REC TIME using steps 1-7 of Animation ( see page 91 ).
Chapter 7 Other Information Chapter Overview: • T roubleshooting • Final Notes • Car e and Cleaning • T raveling Tips • Specifications • Customer Assistance and Service • Limited W arranty • FCC Declaration of Conformity and Industry Canada Information • Optional Accessories • Index 93 Changing Entertainment.
Other Information 94 Chapter 7 T r oubleshooting If you’re having problems with your camcorder , try the solutions in this section. If the problem still exists, please consult your nearest RCA authorized service center . External noise and interference (from a TV , a radio, etc.
Other Information Chapter 7 95 Bright, crystal-shaped spots appear in the LCD monitor and the viewfinder . Sunlight is directly entering the lens. This is not a defect of the camcorder . The rear of the LCD monitor is hot. The light used to illuminate the LCD monitor causes it to be hot.
Other Information 96 Chapter 7 Recording Problems Recording cannot be performed. Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some tapes have removable tabs. If the tab has been removed, cover the hole with adhesive tape.
Other Information Chapter 7 97 Rewinding or fast-forwarding can ’ t be performed. The tape is already fully wound on one reel or the other . The picture is blurr ed in the Quick Review or Retake mode. This is normal while recording in the SLP mode. Some noise may be present while recording in the SP mode.
Other Information 98 Chapter 7 Digital Still Camera Problems Although SNAPSHOT is pressed, the snapshot isn ’ t stor ed in the built-in memory . When the remaining picture number icon blinks 0 , you must delete some pictures before you can store new ones ( see page 69 ).
Other Information Chapter 7 99 Final Notes Power • Perform charging where the temperature is between 10 ° C and 35 ° C (50 ° F and 95 ° F). 20 ° C to 25 ° C (68 ° F to 77 ° F) is the ideal temperature range for char ging. If the environment is too cold, char ging may be incomplete.
Other Information 100 Chapter 7 Video Recording • When the Power switch is set to A or M and the LCD monitor is opened at an angle of 25˚ or more, the LCD monitor switches on and the viewfinder switches off automatically to save power . • The cassette tape holder can’t be opened unless a power supply is attached.
Other Information Chapter 7 101 T apes • A power supply must be attached to load or eject a tape. • When loading a tape, it takes a few seconds for the cassette tape holder open. Never apply force to the holder or door cover as this might result in damage to the camcorder and void the warranty.
Other Information 102 Chapter 7 Care and Cleaning Care and Maintenance After Using the Camcorder 1. Set the Power switch to OFF . 2. Open the LCD monitor at least 60˚. 3. Slide the EJECT switch to open the cassette tape holder , then remove the tape.
Other Information Chapter 7 103 Pr oper Care and Storage • Keep dirt from entering the camcorder’s cassette tape door . Dust and grit are abrasive and cause excessive wear to both the recording/playback heads and tapes. • Always cap the lens when the camcorder is not in use.
Other Information 104 Chapter 7 T ape Car e and Storage • When finished with a tape, rewind it, remove it from the camcorder , and label it. Protect the tape using the erase protection tab if necessary. • Store tapes vertically in their protective cases at normal room temperatures.
Other Information Chapter 7 105 Things to A void • Do not attempt to disassemble the camcorder . There are no user-serviceable parts inside. • A void operating the camcorder immediately after moving it from a cold location to a warm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperature before inserting a tape.
Other Information 106 Chapter 7 T raveling Tips • W rite down your camcorder’s serial number and keep it separate from the camcorder when traveling. If your camcorder is lost or stolen, you will be able to identify it. • Use extra care to avoid damage to your camcorder and accessories when operating them at a beach or pool.
Other Information Chapter 7 107 Specifications Camcorder Format S-VHS*/VHS NTSC standard Power source DC 11 V (Using AC power supply) DC 6 V (Using battery pack) Power consumption Viewfinder on: 4.7 W (CC6384) 4.4 W (CC6394) LCD monitor on: 5.2 W (CC6384) 5.
Other Information 108 Chapter 7 Digital ø2.5 mm, 4-pole, mini-head jack S-Video* Y : 1 V (p-p), 75 Ω , analog output C : 0.29 V (p-p), 75 Ω , analog output AC Power Supply Power requir ement U.
Other Information Chapter 7 109 Customer Assistance and Service Y ou can reach Thomson at the following number: 800-283-6503 (T oll free inside U.S.A.) Our toll-free camcorder number operates from 8 a.
Other Information 110 Chapter 7 Important information to customers who ship defective equipment to Thomson Consumer Electronics The Thomson representative who authorized the retur n of your equipment will give you an SR number over the phone. They will also provide you with instructions on where and how to return your camcorder.
Other Information Chapter 7 111 Limited W arranty Limited W arranty What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • 90 days for labor charges.
Other Information 112 Chapter 7 To receive a replacement Camcorder before you return yours: Option I 1. Provide your Discover , MasterCard, or Visa account number and expiration date to our phone representative.
Other Information Chapter 7 113 • A brief note describing your camcorder’s problem. • Y our name, address and phone number . Return transportation, storage, handling, and insurance costs are your sole responsibility. W e accept no liability in case of damage or loss.
Other Information 114 Chapter 7 How State Law relates to warranty: • This warranty gives you specific legal rights and you also may have other rights that vary from state to state. If you purchased your camcor der outside the United States: • This warranty does not apply.
Other Information Chapter 7 115 FCC Declaration of Conformity and Industry Canada Information FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it. This device complies with part 15 of FCC Rules.
Other Information 116 Chapter 7 Optional Accessories W e invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your camcorder . The following pages have a selection of accessories to help make your memorable moments look and sound even better .
Other Information Chapter 7 117 VH83 A/V Cable Cautions: • Before using a tripod, make sure it is stable enough to hold the camcorder without falling over . Do not transport the camcorder attached to the tripod. • When attaching your camcorder to a tripod, be careful not to force the tripod screw into the camcorder ’ s tripod mounting hole.
Other Information 118 Chapter 7 T o order accessories, contact your local Dealer . If a dealer is not nearby, you can also follow the directions below to order by telephone or direct-by-mail. United States and Canada Orders T o place your order by phone, have your Visa, MasterCard, or Discover car d ready and call the toll-free number listed below.
Other Information Chapter 7 119 Accessories Order Form Description Part No. Price Qty. T otal Super Lightweight T ripod AC088 $ 49.95 Soft Camcorder Case AC201A $ 34.95 Shoulder Strap ACS091 $ 12.95 Rechargeable Battery (2 hour) 244265 $ 59.99 (for CC6384) Rechargeable Battery (1 hour) 244427 $ 49.
Other Information 120 Chapter 7 ¤ r r s TM Charge your order on your VISA,MasterCard, or Discover Card by filling in below USE YOUR CREDIT CARD IMPORTANT: Copy complete account number from your VISA .
This Page Left Blank Intentionally.
Index 122 Chapter 7 Index A A (audio) and V (video) jacks 54 Accessories 116 order form 119 Additional notes about S-VHS and S-VHS ET Cassette 24 Advanced features 80 Animation 91 Animation and Time-L.
Index Chapter 7 123 Index playback 66 Industry Canada information 115 Initializing the built-in memory 70 Insert a cassette tape 13 Instant titles 90 J Journalistic shooting 38 L LCD monitor 14, 28 LC.
Index 124 Chapter 7 S S-video and audio connection 54 Seeing what you are recording 28 Selected image 66 Self-recording 39 Service 109 Shoulder strap 6, 21 Shuttle search 50 Slide show 65 Snapshot ico.
Index Chapter 7 125 U Unprotecting images 68 V Video light 12, 42 Video light details 42 Viewfinder 14 W W and T (zoom lever) 40 W arning icons 30 W arranty 111 White balance adjustment 87 Wipes 81 Z .
10330 North Meridian Street Indianapolis, IN 46290 Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. ©2001 Thomson Consumer Electronics, Inc. T rademark(s) ® Registered Marca(s) Registrada(s) Printed in Japan TOCOM 1571624B Part No.
デバイスRCA CC6394の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
RCA CC6394をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRCA CC6394の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。RCA CC6394の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。RCA CC6394で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
RCA CC6394を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRCA CC6394の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、RCA CC6394に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRCA CC6394デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。