RCAメーカーG27669の使用説明書/サービス説明書
ページ先へ移動 of 64
color tele visioncolortelevisionco lor tele visioncolortelevisioncolo r tele visioncolortelevisioncolort ele visioncolortelevisioncolortel e visioncolortelevisioncolortele v isioncolortelevisioncolort.
VCR Plus+, C 3 , PlusCode, GUIDE Plus+, and GUIDE Plus+ Gold are trademarks of Gemstar Development Corporation. The GUIDE Plus+ Gold system is manufactured under license from Index Systems Inc. WARNING T o reduce the risk of fire or shock hazard, do not expose this TV to rain or moisture.
1 T able of Contents Setup and Connections .......................................................... 3 Step 1: Unpack the TV ...................................................................... 4 Step 2: Connect Y our TV ...........................
2 T able of Contents Using the Menu system ......................................................... 27 Menus and Control Panels ............................................................. 28 Audio Menu ..............................................
3 Setup and C onnections Getting st arted This manual is designed to get you started quickly . The first five sections of the manual show you how to get your TV set up and connected, run the Interactive Setup, program the remote, and use all of the menus, features, and controls of your TV .
4 Setup and Connecti ons Step 1: Unp ack the TV Make sure to locate the remote control. Step 2: Connect Y our T V There are three types of connections outlined in this section: TV Only: If you ’ re only going to connect the TV to your home antenna or cable system.
5 Setup and C onnections The Ba sic Connection (P IP Not A v ailable) The basic connection below (TV and VCR) is the most common connection and is therefore used to illustrate a single component connection with your TV .
6 Setup and Connecti ons Once you have made your connections, you will need to program the TV to tune to the correct video input channel in order to see and hear audio and video from a component such as a VCR or DVD player . Y ou will program this later in the Interactive Setup.
7 Setup and C onnections Cautions: Position cables to avoid audio hum or interference • Insert all cables firmly into jacks. • Place the audio/video cables to the sides of the TV’ s back panel instead of straight down the middle. • T ry not to coil any twin-lead cables and keep them away from the audio/video cables.
8 Setup and Connecti ons How to View Y our Components T o watch the satellite receiver in this connection, press TV to put the remote control into TV mode, then press WHO • INPUT to scroll through the video input channels until you tune to VID (or SVID) input.
9 Setup and C onnections Tip Y ou may want to use a piece of clear plastic tape to temporarily affix the controller’ s node until you have completed the interactive setup. That way you can easily move it if you have not placed it exactly over the sensor .
10 Setup and Connecti ons Step 4: Plug in the TV Plug the end into the wall outlet, matching the wide blade of the plug with the wide slot in the outlet. Be sure to insert the plug completely . Step 5: Place Ba tteries in the Remote • Remove the battery compartment cover from the back of the remote.
11 Interactive Setup There’ s an on-screen setup routine The interactive setup routine helps you through the steps needed to configure the TV and set up the GUIDE Plus+ Gold menu system: • Select .
12 Interactive Setup Using Point and Select Y ou only need to know one rule when using the remote to access on- screen menus and control panels: point and select. The point and select method has two steps. 1. Point to a menu item using the MOVE arrows on the remote.
13 Interactive Setup SETUP Would you like to begin Setup now? 1 Begin setup now 2 Cancel setup 3. Point to Begin setup now and press MENU or OK. Selecting a Langu age The first part of the setup routine asks you to select your preferred language for the menu system.
14 Interactive Setup Y ou can set up the GUIDE Plus+ Gold system during Interactive Setup or by selecting the GUIDE Plus+ Menu from the Main Menu. The GUIDE PI US + Gold S ystem The next step lets you set up the GUIDE Plus+ Gold system to display your local program listings, and control your cable box and VCR.
15 Interactive Setup Select YES if the cable box changed to channel 9, or NO if it did not. If you select NO , the system will try another code. If the GUIDE Plus+ Gold system cannot recognize either your cable box or VCR after several tries, a screen stating “ Cable Box (VCR) test failed.
16 Interactive Setup Setting the Time The next step in the Interactive Setup lets you set the time of day . If your GUIDE Plus+ Gold system has not completed its first download, you need to set the time. Once the system has completed its first download, it sets the time for you automatically .
17 Interactive Setup Setting the VCR1 Channel (a uto tuning) The next step lets you set the VCR1 channel. When you set the VCR1 channel, you ’ re telling the TV what channel to tune to when you press the VCR1 button on the remote. This is called auto tuning.
18 Interactive Setup SETUP Would you like to use a second VCR with your TV? 1 Use TV with VCR 2 2 Skip this step 1. Press MENU or OK to bring up the VCR2 choice list. 1 Not connected 2 Channel 3 3 Channel 4 4 Video Input SET VCR2 CHANNEL 2. Point to the choice that matches the way you have your second VCR connected to the TV .
19 Interactive Setup SET DVD CHANNEL 1 Not connected 2 Channel 3 3 Channel 4 4 Video Input 2. Point to the choice that matches the way you have your DVD player connected to the TV . 3. Press MENU or OK to continue. Setting the SA T/CABLE Channel (aut o tuning) The next step lets you set the SA T/CABLE channel.
20 Interactive Setup Labeling the Channels This last step in the Interactive Setup lets you edit your channel list and label your channels. (For more, see List and Labels in the Using the Menus section.) SETUP Would you like to name each channel? 1 Name channels 2 Skip this step 1.
21 How to use y our Universal Remote Using the Remote This section defines the buttons of the remote and how to program it to control other components. The universal remote can be programmed to control most brands of remote controllable VCRs, satellite receivers, and cable boxes.
22 Using the Remote Remote Buttons ON•OFF When in TV mode, turns TV on and off. If in another device mode (VCR, DVD, Satellite, etc.) and programmed, will turn the device on and off. When pressed twice within two seconds, all devices that are on will be turned of f (this feature only works with most RCA, PROSCAN and GE products).
23 Using the Remote MENU Brings up the Main menu and selects highlighted items. When in VCR mode, it functions as a PROGRAM button. CLEAR Removes any menu or display from the screen and returns you to TV viewing. Also exits the GUIDE Plus+ Gold menu system.
24 Using the Remote Programming the Remote The universal remote can be programmed to control most brands of remote controllable VCRs, satellite receivers and cable boxes. The remote is already programmed to control most RCA, GE and PROSCAN TVs, VCRs, DVD players, laserdisc players and satellite receivers.
25 Using the Remote Using Dir ect Entry 1. T urn on the component to be programmed. 2. Look up the brand and code number(s) for the component on the code list on the last page of this section, Using the Remote . 3. Press and hold the button on the remote you want to program.
26 Using the Remote VCR Admiral ......................................................................... 2131 Adventura ..................................................................... 2026 Aiko ..................................................
27 USING THE menu S YSTEM Setup and connecti ons Interactive Setup 1 2 Using the Menu S ystem Using the remote 3 4 Fea tures and Controls 5 Reference 6 The Menu S ystem This section explores the menus of your TV — beginning with some information on using menus and control panels.
28 USING THE menu S YSTEM Menus and Control P anels Using the buttons on both the remote and front panel enable you to access and make changes to the menus, control panels, and choice lists. Menus and choice lists use the point and select rule to navigate, but control panels use a variety of methods to adjust features on your TV .
29 USING THE menu S YSTEM Sliders Sliders are used to make adjustments to a particular control. T o use a Slider in a menu: 1. Press the up or down arrow to select the slider control for the feature you want to adjust. 2. Press the right or left ar row to adjust the indicator line on the slider .
30 USING THE menu S YSTEM TV MAIN MENU 1 Audio 2 Picture Quality 3 Screen 4 Channel 5 Time 6 Parental Controls 7 GUIDE Plus+ Menu 8 Setup 0 Exit AUDIO 1 Mute 2 Tone Controls 3 Audio Processor 4 Audio Output & Speakers 0 Exit A udio Menu Mute Press OK to reduce the TV ’ s volume to its minimum level.
31 USING THE menu S YSTEM Second Audio Program (SAP) Plays the program ’ s audio in a second language, if one is available. The TV displays the word SAP when you tune to a program that is broadcast with SAP information. SAP audio is broadcast in mono.
32 USING THE menu S YSTEM Picture Qu ality Menu Basic Picture Contr ols Displays the five slider controls for adjusting the way the picture looks. Contrast Adjusts the difference between the light and dark areas of the picture. Color Adjusts the richness of the color .
33 USING THE menu S YSTEM TV MAIN MENU 1 Audio 2 Picture Quality 3 Screen 4 Channel 5 Time 6 Parental Control 7 GUIDE Plus+ Menu 8 Setup 0 Exit Screen Menu Closed-Caption Display Displays a choice list that lets you choose the way closed captioning information is shown on the screen.
34 USING THE menu S YSTEM Using Closed Captioning Many programs are encoded with closed captioning information, which lets you display the audio portion of a program as text on the TV screen. Closed captioning is not available on all channels at all times.
35 USING THE menu S YSTEM Channel Menu Signal T ype Displays a choice list that lets you select the current antenna type. This option does not appear when the GUIDE Plus+ system is set up. UHF/VHF Antenna Choose this if you are currently using an off-air antenna for TV signals.
36 USING THE menu S YSTEM The choices for each screen are: Not connected Choose this if you do not have a component connected to an antenna or video input on the back of the TV , or if you don ’ t want the TV to tune to a channel when the particular component button is pressed.
37 37 Fea tures and C ontrols Setup and connecti ons Interactive Setup 1 2 Using the Menu S ystem Using the remote 3 4 Fea tures and C ontrols 5 Reference 6 How to use the Fea tures and Controls This section introduces you to the features and controls with which your TV is equipped.
38 Fea tures and C ontrols Menu Options TV MAIN MENU 1 Audio 2 Picture Quality 3 Screen 4 Channel 5 Time 6 Parental Controls 7 GUIDE Plus+ Menu 8 Setup 0 Exit GUIDE PLUS+ MENU 1 GUIDE Plus+ Setup 2 GU.
39 Fea tures and C ontrols STOP P AUSE TV ON OFF AUX DVD SAT CABLE PIP SWAP RESET CH CTRL PLA Y FORWARD REVERSE SOUND GO BACK C H + C H - V O L V O L SKIP MUTE INFO MENU OK CLEAR GUIDE ANTENNA 1 2 3 4.
40 Fea tures and C ontrols STOP PAUSE TV ON OFF AUX DVD SAT CABLE PIP SWAP RESET CH CTRL PLA Y FORWARD REVERSE SOUND GO BACK C H + C H - V O L V O L SKIP MUTE INFO MENU OK CLEAR GUIDE ANTENNA 1 2 3 4 5 6 7 8 9 0 WHO INPUT VCR1 VCR2 REC•VCR+ Grid Guide The Grid Guide appears each time you enter the GUIDE Plus+ Gold menu system.
41 Fea tures and C ontrols When highlighting the Channel names (the left column on the Channel listing), the following Action button is available on the bar: • Lock/Unlock Press 1 to lock or unlock .
42 Fea tures and C ontrols The program information window will display a confirmation when you have successfully created a timer to watch or record. If you have selected two programs to watch or record which begin at the same time or overlap, you will receive a timer conflict message.
43 Fea tures and C ontrols Messages Occasionally you will receive messages regarding your GUIDE Plus+ Gold system, as well as special programming information. Y ou can access these messages from the Message Menu on the Menu bar . T o read messages: 1.
44 Fea tures and C ontrols Editor Menu Action Buttons While browsing the Editor menu, the following Action buttons are available on the bar: • Cancel Press 1 on the remote to cancel any changes made since entering the Editor Menu. • Change Press 2 on the remote to change the channel number for the highlighted channel line.
45 Fea tures and C ontrols PIP (Picture-in-Picture) O pera tion The PIP (picture-in-picture) feature lets you display a second, smaller picture on top of the main picture. Y our TV is equipped with a single tuner that tunes to cable or off-air television signals.
46 Fea tures and C ontrols Channel Marker There are several indicators that may come up when you press the TV , INFO, PIP or SWAP button. This display is called the Channel Marker . 12:01 Displays the current time. CC Displayed when Closed Captioning is available on the current channel.
47 Fea tures and C ontrols P arent al Controls and V -Chip The Parental Controls menu allows you to program your TV so that children cannot see certain programs, channels, or use the front panel controls.
48 Fea tures and C ontrols V -Chip T V Ra ting Limit The V -Chip TV Rating Limit lets you decide what TV programs can and cannot be viewed. T o set TV programming limits: 1. Choose Parental Controls from the Main menu. If Parental Controls have previously been locked, you must enter your password.
49 Fea tures and C ontrols Blocking Age-Based Ratings Y ou can automatically block all program ratings above a specified age-based rating level. For example, if you only want your child to watch progr.
50 Fea tures and C ontrols Viewing Age-Based Ratings After you block age-based ratings, you have the option of changing some of the ratings back to View . 1. Determine which blocked rating you want to view . 2. Use the left and right arrows to highlight the Rating Field.
51 Fea tures and C ontrols - - Content - - V-CHIP TV RATING LIMIT Rating Status TV-PG View DL S VF V V B VV ^ RATING STATUS TV-MA View TV-14 View TV-PG View TV-G View TV-Y7 View TV-Y View DL S VF V BVV VB V V VB V V V Press ^/v to view programs with this content for this rating.
52 Fea tures and C ontrols V -Chip Movie Ra ting Limit Y ou set movie rating limits by blocking movies rated above a specified level. Blocking Movie Ratings If you only want your child to watch movies that have a PG rating and lower (in other words, movies rated PG and G), then you could automatically block out all other movies with higher ratings.
53 Fea tures and C ontrols V -Chip Unra ted Program Block Selecting this option lets you decide if programs that the V -Chip recognizes as “ unrated ” can be viewed.
54 Troubleshooting T roubles sometimes are caused by simple “ faults ” that you can correct without the help of a service technician. If you experience any difficulty with your TV , check a few basic remedies before calling your service technician.
55 Reference Not receiving all cable channels • Make sure you have set up the GUIDE Plus+ Gold menu to recognize your cable box. Select GUIDE Plus+ Menu from the Main menu, then select Setup from the GUIDE Plus+ menu. Choose “ Ye s ” when asked if you have a cable box.
56 Reference RCA TV LIMITED W ARRANTY What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • 90 days for labor charges.
57 Reference • Installation and related adjustments. • Signal reception problems not caused by your television. • Damage from misuse or neglect. • Batteries.
58 Reference The following accessories are available from most dealers and electronics supply stores in case you want to position your components farther apart or need additional cables. Gold-Plated Jacks and Gold-Tipped Cables Gold plating helps prevent oxidation of contacts which provides much less loss than conventional contacts.
59 Reference $ Price Part No. Description Qty Remote Control This is the remote control that came packed with your TV . Replacements or spares can be ordered as needed.
60 Reference Placing an Or der T o place your order by phone, have your Visa, MasterCard or Discover Card ready and call the toll-free number listed below between 8AM and 8PM (EST) Monday through Friday or between 9AM and 5PM (EST) Saturday . Use this number only to place an order for accessory items listed on this order form.
61 Reference Index A Accessories 58 Advanced Connections 4, 6 Age-Based Ratings 47, 49 Audio Audio/Video Cables 7 Menu 30 Output 6 Output V olume & Speakers 31 Processor 30 Auto Channel Search 13,.
10330 North Meridian Street Indianapolis, IN 46290 ©1999 Thomson Consumer Electronics, Inc. T rademark(s) ® Registered Marca(s) Registrada(s) Printed in USA TOCOM 15455160 The following materials were used in printing this publication: Please do not send any products to the Indianapolis address listed in this manual or on the carton.
デバイスRCA G27669の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
RCA G27669をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRCA G27669の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。RCA G27669の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。RCA G27669で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
RCA G27669を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRCA G27669の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、RCA G27669に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRCA G27669デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
