ReebokメーカーRBBE0955.0の使用説明書/サービス説明書
ページ先へ移動 of 19
CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Model No. RBBE0955.
2 W ARNING DECAL PLACEMENT W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Read all instructions in this manual and al l warnings on the weight bench before using the weight bench. Use the weight bench only as described in this manual. 2. It is the responsibility of the owner to ensure that all users of the weight bench are ade- quately informed of all precautions.
4 Curl Pad Barbell W eight Carriage Weight Rest Right Side Left Side Note: The terms “right side” and “left side” are determined relative to a person sitting on the bench; they do not corre - spond to right and left on the drawings in the manual.
5 ASSEMBL Y 1. Attach an Upright (4) to the Crossbar (3) with two M8 x 65mm Bolts (48), two M8 W ashers (32), and two M8 Nylon Locknuts (17). Make sure the warning decal is in the indicated position. Do not tighten the Locknuts. Repeat this step with the other Upright (4).
6 2. Orient the Stabilizer (57) so that the indents around the holes are on the bottom. Attach the B ench Leg (2) to the Stabilizer with two M8 x 50mm Carriage Bolts (53) and two M8 Nylon L ocknuts (17).
7 6. Attach the Backrest T ubes (12) to the Backrest (20) with four M6 x 38mm Screws (42) and four M 6 W ashers (49). D o not tighten the Screws. 8. Orient the Seat (21) as shown and attach it to the Bench Frame (1) with four M6 x 15mm Screws (41). 9.
8 10. Identify the Left Butterfly Arm (6) by the posi- tion of the long side of the indicated tube. S lide a Weight Stop (31) onto the Butterfly Arm. G rease an M10 x 57mm Bolt (26). Attach the Left Butterfly Handle (7) to the Left Butterfly Arm (6) with the Bolt and an M10 Nylon Locknut (51).
9 14. Attach the Curl Pad (22) to the Curl Post (1 1) with two M6 x 15mm Screws (41). 16. Make sure that all parts are properly tightened before the weight bench is used. The use of all remaining parts will be explained in ADJUSTMENTS starting on the next page.
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 13 for impor- tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for each exercise.
1 1 4 6 18 45 55 56 4 9 STORING THE CURL P AD T o store the Curl Pad (22), slide the Curl Post (1 1) onto a storage tube on an Upright (4). The Lat T ower (9) can be stored in the same way .
12 56 5 61 or 62 10 33 6 A TT ACHING WEIGHTS TO THE BARBELL Slide an equal amount of Weight (61, 62) onto each end of the barbell. Slide the two Lock Collars (63) against the Weights, and tighten them fully . 61 Barbell 63 62 W ARNING: Always secure the Weights (61, 62) on the barbell with the Lock Collars (63).
13 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, p ush them close to their maximum capacity . Y our mus- cles will adapt and grow as you progressively increase the intensity of your exercise.
14 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout.
15 MONDA Y D ate: / / EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS AEROBIC EXERCISE AEROBIC EXERCISE TUESDA Y Date: / / WEDNESDA Y Date: / / THURSDA Y Date: / / FRIDA Y Date: / / Make photocopies of this page for scheduling and recording your workouts.
M8 x 39mm Bolt (52) M8 x 65mm Bolt (48) M8 x 54mm Bolt (43) M8 x 52mm Bolt (18) M6 W asher (49) M8 W asher (32) M8 Nylon Locknut (17) M10 W asher (50) M10 Nylon Locknut (51) M6 x 15mm Screw (41) M6 x .
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the user ’ s manual for information about ordering replacement parts.
EXPLODED DRA WING—Model No. RBBE0955.0 R0805A 60 59 63 63 46 46 58 62 61 33 14 15 15 13 2 9 2 9 41 11 22 28 10 37 28 47 37 51 34 26 50 4 0 3 4 36 35 35 50 51 27 51 15 8 26 28 30 56 55 28 28 31 30 12.
Part No. 230725 R0805A Printed in China © 2005 ICON IP , Inc. LIMITED W ARRANTY T o order replacement parts, see the front cover of this manual. T o help us assist you, please be prepared to give the following information: 1. the MODEL NUMBER of the product (RBBE0955.
デバイスReebok RBBE0955.0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Reebok RBBE0955.0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはReebok RBBE0955.0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Reebok RBBE0955.0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Reebok RBBE0955.0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Reebok RBBE0955.0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はReebok RBBE0955.0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Reebok RBBE0955.0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちReebok RBBE0955.0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
