AudiovoxメーカーAVT-597の使用説明書/サービス説明書
ページ先へ移動 of 21
5” COLOR TV/MONITOR DC OPERATION WITH REMOTE CONTROL AVT-597 OPERATING INSTRUCTIONS SPECIALLY DESIGNED FOR THE VAN AND AUTOMOTIVE INDUSTRIES.
• A VIDEO MONITOR/TV is designed for rear seat viewing only. This product may only be installed in the rear seat compartment of the vehicle, out of the driver’s view.
EXPLANATION OF GRAPHIC SYMBOLS: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICABLE PARTS INSIDE REFER SERVICING TO Q.
1. Read Instructions – All the safety and operating instruction should be read before the appliance is operated. 2. Retain instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.
9. Ventilation – Slots and openings in the cabinet are provided for ventilation, to ensure reliable operations of the video product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video products on a bed, sofa, rug, or similar surface.
c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the.
1. For your protection, please read these instructions completely and comply with all warnings, cautions and instructions placed on the set or described in the operating instructions.
POWER SUPPLY The AVT-597 is designed for 12 Volt operation. CAR BATTERY OPERATION A cigarette adapter cable is supplied for use in any 12 Volt, negative ground vehicle.
-2- FRONT 1. CHANNEL UP BUTTON 2. CHANNEL DOWN BUTTON 3. VOLUME UP BUTTON 4. VOLUME DOWN BUTTON 5. TV/VIDEO SELECTOR BUTTON 6. PICTURE CONTROL UP BUTTON 7. PICTURE CONTROL DOWN BUTTON 8. PICTURE CONTROL SELECTOR BUTTON 9. POWER BUTTON 10. LED POWER INDICATOR 11.
-3- REAR 12. ANTENNA TERMINAL 13. DC POWER JACK 14. EXTERNAL SPEAKER JACK 15. AUDIO OUTPUT JACK 16. VIDEO OUTPUT JACK 17. AUDIO INPUT JACK 18. VIDEO INPUT JACK.
Before attempting to operate your Remote Control, install batteries as described below. 1. Turn the remote control face down. Press down on the ridged area of the battery cover and slide it off. 2. Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed.
-5- REMOTE CONTROL OPERATION (1) TV PARTS: 1. POWER ON/OFF Press this button to turn on the set. The channel number will be displayed on the screen, and the picture will appear in a few seconds. Press the button again to turn the set off. 2. DIRECT ACCESS (0-9, 1--) BUTTONS Use these buttons to make a direct channel selection.
5. PICTURE SELECTOR BUTTON Each time this button is pressed, the on screen picture adjustment display cycles through “adjustment bars” for CONTRAST, BRIGHTNESS, COLOR, and TINT. Then use VOLUME UP/DOWN buttons to raise ( ù ) or lower ( ü ) the level.
9. SKIP/SEARCH BUTTON This button selects between SKIP and SEARCH mode. In “SKIP mode” the TV only stops on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When the SKIP mode is off, the TV will stop on all active channels.
(2) VCP PARTS: 12. POWER BUTTON This button is used to turn the unit on and off. 13. “REW” REWIND BUTTON If this button is pushed while the tape is stopped, the tape will rewind. If this button is pushed while the tape is playing, the VCP will go into rewind search mode.
Follow this simple procedure to make channel tuning more convenient: 1. Use the TV/CATV button on the Remote Control to select the broadcast system appropriate for your home.
• POWER BUTTON Operation duplicates the POWER BUTTON on the remote control unit. • CHANNEL UP/DOWN BUTTONS Operation duplicates the CHANNEL UP/DOWN BUTTONS on the remote control unit. • PICTURE CONTROL UP/DOWN BUTTONS (CONTRAST, BRIGHTNESS, COLOR, TINT) Press to cycle through the TV ON-Screen adjustments for color and picture controls.
• VIDEO INPUT JACK Connect the video output from a video camera, VCR, video game, etc. • AUDIO INPUT JACK Connect the audio output from a video camera, VCR, video game, etc. • VIDEO OUTPUT JACK Permits video connection of your unit to a monitor or another VCR.
1. Connect the CATV Cable directly to the TV antenna terminal. Your local Cable system operator’s converter box should not be required unless certain premium channels are scrambled. 2. Select the appropriate CATV setting with the TV/CATV button on the remote control.
Description Part Number AVT-988 9” Color Television with Remote (12V) AVT988 AVT-597 5” Color Television with Remote (12V) AVT597 AVT-1498 13” Color Television with Remote (12V) AVT1498 AVP-7000.
23319 Cooper Dr. Elkhart, IN 46514 Telephone: 219-264-3135 1999 A.S.M.C. PPLICATIONS, L.L.C..
デバイスAudiovox AVT-597の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Audiovox AVT-597をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAudiovox AVT-597の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Audiovox AVT-597の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Audiovox AVT-597で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Audiovox AVT-597を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAudiovox AVT-597の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Audiovox AVT-597に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAudiovox AVT-597デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。