Revolabsメーカー01-hdvenuの使用説明書/サービス説明書
ページ先へ移動 of 26
Revolabs HD Venue ™ Wireless Microphone System Models: 01-HDVEN U , 03 -HDVENU EU, 03 -HDVENUC N, 03-HDVENUJP User and Set - up Guide.
© 20 10 REVOLA BS, INC. A ll rights reserved. N o part of this docu ment may be reproduced in any form or by any means without express written permission from Rev olabs, Inc.
Contents Safety and General Inf ormation .................................................................................................................... 4 Introduction ..............................................................................
- 4 - Safety and Gen eral Information Please read the fol lowing in formation to ensure s afe and efficien t use of your Rev olabs system. FCC User In formation FCC ID: T5V01H DVENUNM Revolabs HD Venu.
- 5 - Export La w A ssurances This product is controlled under the export regulati ons of the Uni ted States o f America and Canada. The Governments o f the United States o f America an d Canada may restri ct the exportation or re -exportation of this product to certain des tinations.
- 6 - Introduction Congratulations on your purchase of a Revo labs W ireless Microphone Sy stem! Th is syst em utilizes 1.9 GHz DECT technology, and high band -width audio from multiple wireless micro.
- 7 - Acoustic echo cancellation (AEC) Feedback elimination Level control Equalization Noise cancellation The system is designed to optimize audio capture/reproduction b y providin.
- 8 - Revolab s HD Venue™ Base Stat ion Conn ections The Revolabs HD V enue ™ Base Station, shown below in f ront and rear panel views, manages wireless audio signal p rocessing, pairing, and muting between the Revolabs microphones and the Base Station.
- 9 - Revolabs HD Venu e ™ Base Station Audio Connections There are two 3 .5mm balan ced inputs (either ¼‖ or XLR) and two 3.5mm balanced outputs (either ¼‖ or XLR) on the back panel of the unit p roviding access to each channel‘s audio signal.
- 10 - 1 2 3 4 5 6 7 8 on off Using the Rea r Panel Configurat ion DIP S witches DIP Switch Feature Off (Default) On 1 Output Mixi ng Individu al Outputs Mixed Output 2 Low Pass Fil ter No LPF LPF 3 Audio Output Level Line Level Mic Level 4 Mute Mod e Individu al Mutes No Mutes 5 Sharing M ode All frequencies will be used.
- 11 - DIP Switch 5&6 – Sharing Mode: To use two HD Venue Systems in the same area, both systems must have DIP Switch 5 set to ON. One of the HD Venue Systems must have DIP Sw itch 6 set to ON (A frequen cies) and the other HD Venue System must have DIP Switch 6 set to OFF (B frequencies).
- 12 - Mics Unmute at Startup: By default the m ics go into a muted state when they are removed from the cha rger. Thi s is done to prevent handling no ise as the m icrophone is placed into position. By selecting ‗Mics Unmuted at Startup‘, the mics will go into a n unmuted state when removed from the charger.
- 13 - Battery: This provides the current battery level for the microphone that is paired to each channel and active. The value changes in 12.5% increments and represents the bottom o f the range the battery is in. Therefore a value of 87% means that the battery level is between 87%-100%.
- 14 - 1. Earpiece jac k — accepts the 2.5mm pl ug for the e arpiece. 2. Charging port — doc ks to Rev olabs HD Charger B ases. 3. Pocket clip — also u sed to attach microphone to a lapel, blouse o r lanyard. 4. Mute Button — p ress to mute , un-mute and pair microphone.
- 15 - A djusting the Volume on the Wearable Microphone Ea rpiece To change the volume on the W earable microphone earpiece, u se the dial on the earpiece w ire. Turning th e dial towards the earpiece , as shown in the figure, will increase the volume, an d turning the dial towards th e microphone will decrease th e volume.
- 16 - 3. With the microphone in position on the table, un-mute the microphone by pressing and releasing the Mute button (confirm by a f lashing GREEN LED). 4. To turn microphone off, return the micro phone unit to the Charger Base or press and hold t he Mute button for ~10 seconds until the LED turns solid RED and release button.
- 17 - 5 4 3 2 1 1. Remove the microphone from the Charger Base to turn on and automatically mute the mic. (i ndicated by a flashing RED LED) 2. Directional Tabletop microphones should be located on the table with the a coustic cover pointed toward the users, trying to keep the microphone 2 to 6 feet (.
- 18 - 2. Charging Port — doc ks to all Rev olabs HD Charger Bases . 3. Mute button — press to mute, un-mu te and pair mi crophone. 4. LED display — visual status for mute, un -mute, and pairing. 5. XLR Female connector — balanced audi o for dy namic microphones.
- 19 - 5 4 3 2 1 1. Audio Out port — ac cepts the 2.5m m plug for the earpiece. 2. Charging Port — docks to all Rev olabs HD Charger Bases . 3. Mute button — p ress to mute , un-mute and pair micropho ne. 4. LED display — visual status for mu te, un-mute, and pai ring.
- 20 - 1 2 3 Note: Microphones in new systems must be paired to the Base Station with each m icrophone assigned to a unique channel on the Base Station. Remember, microphones are always muted (f lashing RED LED) when the y are removed f rom the Charger Base and the Mute button needs to be pressed to make it ―live‖ (flashing GREEN LED).
- 21 - Power Module The Charger Ba se requires 5VDC power, provided b y th e AC Adapter. Plug the sup plied AC adapter into an appropriate power outle t 110 -240 AC, 50 -60Hz.
- 22 - Revolabs HD ™ Indicator LEDs The following tables show activ ities associated with the various states shown by the LEDs: Equipment Use Microphone LED Base Station Channel LEDs Meaning Microph.
- 23 - Warranty Revolabs, Inc. warrants this product to be free of manufacturing d efects. Repair or replacement of any defective part or unit (at the discretion of the Seller) w ill be free of charge for the period defined in the Revolabs Professional Products Limited Warranty.
- 24 - Specifications Dimensions, (L, W, H) and We ight : HD Venue Base S tation 16.9‖ (4 3.03 cm) x 8.0‖ (20.32 cm ) x 1.7‖ (4.42 cm), 2.0 lbs (5.45 k g) HD Charger Base 4.6‖ (11.75 cm ) x 3.125‖ (7. 9 cm) x 1.0‖ (2.54 cm ), 0.325 lb s (0.
- 25 - Index Adjusting the Volume, 15 Base Station, 7 Back Panel, 7 Front Panel, 7 Channel LED indicators , 8 Channels , 9 Charger Bays, 20 Charging the Batteries, 21 First-time use, 21 Recharging, 21.
- 26 - R e v o l a b s H D V e n u e ™ W i r e l e s s M i c r o p h o n e S y s t e m M a n u a l 01 - HD V N U M A N - PAP - 11 M A R C H 2 0 1 2 ( R e v 2 . 2 ) No t e : Microphones must be fully charged and paired to the Base Station prior to first use.
デバイスRevolabs 01-hdvenuの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Revolabs 01-hdvenuをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRevolabs 01-hdvenuの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Revolabs 01-hdvenuの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Revolabs 01-hdvenuで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Revolabs 01-hdvenuを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRevolabs 01-hdvenuの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Revolabs 01-hdvenuに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRevolabs 01-hdvenuデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
