Revolabsメーカー04-HDDUALEUの使用説明書/サービス説明書
ページ先へ移動 of 23
Revolabs HD ™ Single/Dual Wireless Microphone System Models: 02- HD SGL, 02- HD DUA L , 04 - HD SGL EU and 04 - HD D U A L EU User and Set - up Guide.
© 2009 REVOLABS, INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permission from Revolabs, Inc.
Contents Safety and General Inf ormation .................................................................................................................... 1 Introduction ..............................................................................
- 1 - Safety and Gen eral Information Please read the fol lowing information to ensure safe and e ff icient use of your Revolab s system. FCC User In f ormation FCC Registration Nu mber: 0014898290 FC.
- 2 - Export La w A ssurances This product is controlled under the ex port regulations o f the United S tates of America and Canada. The Governments o f the United States of America and Canada may restrict the exportation or re -exportation o f this product to certain des tinations.
- 3 - Introduction Congratulations on your purchase of a Revo labs W ireless Microphone System! This syst em utiliz es 1.9 GHz DECT technology, a nd high band -width audio f rom multiple wireless micr.
- 4 - Acoustic echo cancellation (AEC) Feedback elimination Level control Equalization Noise cancellation The system is designed to optimize audio capture/reproduction b y providing : Consistent audio.
- 5 - To Install the Base Station: 1. Plug the power cord into an appropriate outlet 2. Connect the necessary outputs and inputs Revolabs HD ™ Base Station A udio Connec tions There are (2) 3.5mm balanced inputs and (2 ) 3.5 mm balanced outputs o n the back panel of the unit providing access to each channel’s audio signal.
- 6 - 1 2 3 4 5 6 7 8 on off Using the Rea r Panel Configuration DIP Switches DIP Switch Feature Off (Default) On 1 Output Mixi ng Individu al Outputs Mixed Output 2 Low Pass Fil ter No LPF LPF 3 Audi.
- 7 - DIP Switch 5&6 – Microphone EQ: There are four EQ options for the microphone outputs of the Base Station. On e of these options can be activated for both microphones.
- 8 - Revolabs HD W earable Microphones turn o n and mute auto ma tically when removed from Charg er Base, to reduce noise w hile b eing attached. To use the HD W earable Microphone: 1.
- 9 - Using the HD Om ni-Directional Tableto p Wireless Boundary Mi croph ones The HD Omni-directional Tabletop W ireless Boundary Microphones enable multiple conference attendees to use a single microphone. 1. LED display — visual status for mute , un-mute, a nd pairing.
- 10 - If the microphones are placed too far from the Base Station (~65 feet or 20 meters) the connection will be dropped (LED flashes a ll colors) and the m icrophone will m ute. Af ter 15 seconds the microphone will beep 5 times, and will continue beep ing every 30 seconds to indicat ing it’s out of range.
- 11 - 5 4 3 2 1 3. With the microphone in position, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashing GREEN LED). 4. To turn microphone off, return the microphon e un it to the Charger B ase o r press and hold t he Mute button for ~10 seconds until the LED turns solid RED and release button.
- 12 - 5 4 3 2 1 Note: The Adapter does not provide phantom power or bias current so it cannot be use d w ith condenser or electret microphones. 2. With the microphone attached, un-mute the Adapter by pressing and releasing the Mute button (confirm by a flashing GREEN LED).
- 13 - 1. Audio Out port — ac cepts the 2.5mm plu g for the earpiece. 2. Charging Port — doc ks to all Revolab s HD Charger Bases. 3. Mute button — press to mute, un-mute and pair micro phone . 4. LED display — visual status for mute, un-mu te, and pairing.
- 14 - 1 2 3 To pair an individual microphone to the Base Station: 1. Turn the microphone OFF (no LED activity ). If the microphone is ON, press and hold the Mute button for 10 seconds until the LED turns solid RED then release the button to turn the unit o ff .
- 15 - Important : The Lithium Polymer rechargeable batteries that power the microphones are not user serviceable. Please contact Revolabs (www.revolabs.com) or your AV service provider for replacement instructions and to assure the proper disposal method is used.
- 16 - Revolabs HD ™ Indicator LEDs The following tables show activ ities asso ciated with the various states shown by the LEDs: Equipment Use Microphone LED Base Station Channel LEDs Meaning Microp.
- 17 - Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) wil l be f ree of charge for the period of one year.
- 18 - Specifications Dimensions, (L, W, H) and Weight : Single/Dual Base Station 5. 19‖ (13.18 c m) x 3.25‖ (8.25 cm ) x 1 .0 ‖ (2.54 cm), 0.325 lbs ( 0.147 kg) Single/Dual Charg er Base 4.6‖ (11.75 cm ) x 3.125‖ (7. 9 cm) x 1.0‖ (2.54 cm ), 0.
- 19 - Index Adjusting the Volume, 8 Base Station, 4 Back Panel, 4 Front Panel, 4 Channel LED indicators, 5 Channels, 5 Charger Bays , 13 Charging the Batteries, 13 First-time use, 13 Recharging, 13 C.
- 20 - R e v o l a b s HD ™ S i n g l e & D u a l M a n u a l 01 - HD S G L M A N - PAP - 11 M a r c h 2 0 1 0 ( R e v 1 . 6 ) Note: Microphones must be fully charged and paired to the Base Station prior to first use.
デバイスRevolabs 04-HDDUALEUの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Revolabs 04-HDDUALEUをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRevolabs 04-HDDUALEUの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Revolabs 04-HDDUALEUの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Revolabs 04-HDDUALEUで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Revolabs 04-HDDUALEUを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRevolabs 04-HDDUALEUの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Revolabs 04-HDDUALEUに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRevolabs 04-HDDUALEUデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
