RicohメーカーRDC-6000の使用説明書/サービス説明書
ページ先へ移動 of 24
Operation Manual To ensure correct use of your digital camera, read this manual carefully before use. Keep the manual handy for future reference..
Introduction Thank you for purchasing a Ricoh digital camera. This manual explains the correct handling procedures and precautions for your camera. To ensure the best performance, please read the manual thoroughly before using the camera. Keep the manual handy for quick future reference.
1 R Warning R Caution o m Safety Precautions Warning Symbols Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below.
2 R Warning o ● Turn off the power immediately if any metallic object, water, liquid or other foreign object gets into the equipment. Remove the batteries as soon as possible, being careful to avoid electric shocks or burns.
3 R Warning ● Please observe the following in order to prevent fire, electrical shock or cracking due to the adapter. • Use only the indicated power supply voltage. Also avoid bunching wiring and extension cords. • Do not damage, bundle or alter power cords.
4 R Warning m ● Do not use the equipment near flammable gases, gasoline, benzine, thinner or similar substances to avoid the risk of explosion, fire or burns. ● Do not use the equipment in aircraft or other locations where usage is restricted or prohibited as this may lead to disasters or accidents.
5 Observe the following precautions to ensure safe use of this unit. R Caution ● Contact with fluid leaking from a battery can lead to burns. If part of your body comes in contact with a damaged battery, wash the area with water immediately. (Do not use soap.
6 CONTENTS Safety Precautions ............................................................................... 1 Camera Features ................................................................................. 9 Parts & Names .....................
7 Special Shooting Functions .............................................................. 50 Recording Motion Picture Mode ......................................................... 50 Changing the Flash Mode .........................................
8 Chapter 5 MISCELLANEOUS Transferring Images to a PC ............................................................. 90 Installing Camera Utility Software ....................................................... 90 Changing Camera Settings .............
9 Camera Features ● 2,140,000-pixel resolution compact camera With a 2,140,000-pixel resolution CCD, the compact camera produces high-quality, high- resolution images (1600 × 1200). The camera is so light you can carry it with you anywhere. ● Immediate recording Using the camera is as simple as clicking the shutter release button.
10 Bac k Parts & Names ■ Camera Body F ront Cancel Button Shutter Release Button Mode Dial Flash Light ··· P.52 Self Timer LED ··· P.59 Flash Senser Remote Senser ··· P.101 LENS LCD Panel ··· P.14 PIC (Image Quality) Button ··· P.
11 ■ Bottom Battery Cover ■ Remote Control Unit (Optional) (DR-3) ■ SmartMedia Memory Card ■ AC Adapter (100V – 240V) ■ Rechargeable Battery DB-20 SmartMedia Memory Card Cover Tripod Screw Hole Brightness Adjustment ··· P.
12 Explanation of LCD Monitor Displays The LCD monitor or the LCD panel displays symbols and figures showing the status of your digital camera, such as the battery level, the number of pictures that can be taken, and the mode settings.
13 • All items of information are shown for illustration purposes. During actual camera operation, only the relevant items are displayed. ■ Warning Message If any of the warning messages listed below appear on the camera’s LCD monitor, read the corresponding explanation and take the corrective action suggested.
14 Playback/Erasure Error Message Explanation and Remedy Reference Page The SmartMedia memory card is unformatted. Format the card with the camera before using it. A SmartMedia memory card of this type is not supported by this camera. Use another type of SmartMedia.
15 Note • Only the Motion Picture mode [ ] , PIC mode [F,N] and battery mark [ ] are displayed when the motion picture mode is set. ■ Error display and countermeasure When the following error is displayed, check the cause and take the proper countermeasure.
16 FORMAT: ................... Formats a SmartMedia memory card. (P.31) DATE SETTING: ........ Sets the date and time. (P.33) KEEP SETTINGS: ...... Saves camera settings. (P.94) AUTO POWER OFF: ............................ Enables or disables the camera (P.
17 RECORDING MODE: ........................ Switches between recording modes, such as still picture, text, quick shooting (P.43). GRID TEMPLATE ...... Sets crossed lines to assist with image taking. (P.63) WHITE BALANCE: .... Switches between the white balance settings (P.
18 ■ Erase Menu With the camera turned on, set the mode dial to [ ]. To exit the erase menu, set the mode dial to another mode. • The [ ] setting on the mode dial is used to take motion picture mode. • The [ ] setting on the mode dial is used to transfer image files from the camera to a PC.
19 Loading the Batteries (P.25-26) q Load the batteries into the camera. Charge the batteries before loading. (P.27) * When using an AC adapter, connect it to the camera and then to the AC outlet. (P.27) Inserting a SmartMedia Memory Card (P.29-32) q Make sure that the camera is turned off.
20 Shooting Setting the Date and Time (P.33-34) q Slide the power switch and set the mode dial to [SET]. w Press the ▼ or ▲ button to select [DATE SETTING]. e Press the ENTER Select button. r Press the ▼ or ▲ button to change the digit. t Press the MENU button.
21 Playback Changing the Flash Mode (P.51-52) q Set the mode dial to [ ]. w Press the flash mode button to select a flash mode. You can choose Flash Off ( ), Auto ( ), Forced Flash ( ), or Slow synchro mode ( : flashing). The selected mark will be displayed on the LCD monitor or on the LCD panel.
22 Erasing Erasing Files (P.86-88) q Slide the power switch on and set the mode dial to [ ]. w Press the ▼ or ▲ button to select the erase mode and press the ENTER Select button. * Remember that files cannot be restored once they are erased. Before starting to erase a file, make sure that you want to erase it.
デバイスRicoh RDC-6000の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Ricoh RDC-6000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRicoh RDC-6000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Ricoh RDC-6000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Ricoh RDC-6000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Ricoh RDC-6000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRicoh RDC-6000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Ricoh RDC-6000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRicoh RDC-6000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
