RIDGIDメーカーR5010の使用説明書/サービス説明書
ページ先へ移動 of 18
Your new drill has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
2 T ABLE OF CONTENTS Introduction ............................................................................................................................................................... 2 General Safety Rules .
3 WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SA VE THESE INSTRUCTIONS W ork Area Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
4 SPECIFIC SAFETY RULES Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
5 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
6 SPECIFICA TIONS Chuck Capacity ................................................................................................................. ........................ 1/2 in. (13 mm) Input .........................................................
7 UNP ACKING Instructions Your drill has been shipped completely assembled. Carefully remove the tool from the box. Make sure that all items listed in the packing list are included. Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
8 Before using this product, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. WARNING: Exercise caution when using this tool. Careless actions, for even a fraction of a second, can result in serious personal injury.
9 OPERA TION WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose par- ticles being thrown into your eyes, resulting in possible serious injury. SWITCH See Figure 2.
10 OPERA TION Fig. 5 TO INCREASE SPEED, PULL SWITCH TRIGGER VARIABLE SPEED See Figures 5 & 8. Your drill has a variable speed dial designed to allow operator control of speed and torque limits. The speed and torque of your drill can be increased by turning the dial on top of the drill.
11 OPERA TION ADJUSTING THE AUXILIARY HANDLE ASSEMBLY See Figure 7. Follow these steps to adjust the auxiliary handle assembly. Loosen the auxiliary handle assembly by turning the knob counterclockwise. Rotate the auxiliary handle assembly to the desired location.
12 OPERA TION TO INSTALL BITS See Figures 10 and 11. Unplug your drill. WARNING: Failure to unplug your drill could result in acciden- tal starting causing serious injury. Open or close the chuck jaws to a point where the opening is slightly larger than the drill bit you intend to use.
13 OPERA TION DRILLING See Figure 12. Depress and release switch trigger to be sure your drill is in OFF position before connecting it to power supply. Check the direction of rotation lever for correct setting (forward or reverse).
14 CHUCK REMOVAL See Figure 13. The chuck must be removed in order to use some accessories. To remove: Unplug your drill. WARNING: Failure to unplug your drill could result in acciden- tal starting causing serious injury. Using two open-end wrenches, loosen the chuck.
15 MAINTENANCE GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc. WARNING : Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc.
W ARRANTY 16 This product is manufactured under license from Ridgid, Inc. by One World Technologies, Inc. All warranty communications should be directed to One World Technologies, Inc.
NOTES 17.
Customer Service Information For parts or service, contact your nearest Ridgid authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.
デバイスRIDGID R5010の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
RIDGID R5010をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRIDGID R5010の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。RIDGID R5010の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。RIDGID R5010で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
RIDGID R5010を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRIDGID R5010の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、RIDGID R5010に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRIDGID R5010デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。