RobertsメーカーGemini 59 RD-59の使用説明書/サービス説明書
ページ先へ移動 of 24
FM RDS / DAB digital radio Please read this manual before use ROBER TS Sound for Generations RD-59.
Controls ........................................................................... 2-3 Battery operation .................................................................4 Lock switch .................................................................
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls 1. Speaker 2. Band button 3. Auto T une button 4. Info button (Front) 1 2 4 10 11 9. Battery Low indicator 10. T uning Up / Down buttons 1 1. Select button 12.
3 Controls 13. Battery compartment 14. T elescopic aerial 15 14 13 15. Headphone socket 16. DC jack socket (Back) 16.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Battery operation 1. Remove the battery cover on the back of the unit by sliding the cover in the direction of the arrow as shown on the diagram. 2. Insert four LR6 (AA size) alkaline batteries into the spaces in the compartment.
5 Using the AC adaptor Y our radio is supplied with a Mains Adaptor . 1. Place your radio on a fl at surface. 2. Insert the adaptor plug into the DC socket located on the left hand side of your radio. 3. Plug the adaptor into a standard 13 amp mains socket outlet.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Operating your radio - DAB 1. Carefully extend the telescopic aerial. 2. Press the On/Off button to switch on your radio. The display will show "ROBERTS" for a few seconds and then "W elcome to DAB".
7 Selecting a station - DAB 1. The top line of the display shows the name of the station currently selected. 2. Press the Tuning Up/Down buttons to scroll through the list of available stations. 3. Press and release the Select button to select the station.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Display modes - DAB Y our radio has seven display modes:- 1. Press the Info button to cycle through the various modes. a. Scrolling text Displays scrolling text messages such as artist/track name, phone in number etc.
9 1 Finding new stations - DAB As time passes new stations may become available. T o fi nd new stations proceed as follows:- 1. Press and release the Auto T une button . The display will show "Fast Scanning". Y our radio will perform a scan of the UK DAB frequencies.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Manual T uning - DAB Manual tuning allows you to tune directly to the various DAB Band III channels. UK DAB stations are located in the range 1 1B to 12D.
11 1 Dynamic Range Control settings - DAB Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment. 1. Press the On/Off button to switch on your radio. 2. Press and hold in the Info button .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Operating your radio - FM 1. Carefully extend the telescopic aerial. 2. Press the On/Off button to switch on your radio. The display will show "ROBERTS" for a few seconds.
13 Manual tuning - FM 1. Press the On/Off button to switch on your radio. 2. Press the Band button to select the FM band. Fully extend the T elescopic aerial . 3. Press and release the Select button until the display shows "Manual tune < >".
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 14 Display modes - FM In FM mode the bottom line of the display can be set any of four display options. 1. Press the Info button to cycle through the various options.
15 Presetting stations - DAB and FM There are 5 memory presets for each of the two wavebands. 1. Press the On/Off button to switch on your radio. 2. Tune to the required station as previously described. 3. Press and hold the required Preset button until the display shows, for example, "Preset 1 saved".
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Stereo / Mono setting - FM Y our radio will play stereo broadcasts in stereo (via headphones) so long as the received signal is of adequate strength. However , as a stereo signal becomes weaker the audio signal will become poorer .
17 Scan sensitivity setting - FM Y our radio will normally scan for FM broadcasts which are strong enough to give good reception. However , you may wish the Auto-scan function to also be able to fi nd weaker signals, possibly from more distant radio transmitters.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) System reset If your radio fails to operate correctly , or some digits on the display are missing or incomplete carry out the following procedure. 1. Press and hold down the Info button for 2 seconds 2.
19 Headphone socket A 3.5mm Headphone Socket located on the left hand side of your radio is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker . IMPORT ANT : Excessive sound pressure from earphones and headphones can cause hearing loss.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Circuit Features Loudspeaker 75mm Output Power 1 W att Headphone socket 3.
Notes ...................................................................................................................................................................................................... ..............................................
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Notes ...................................................................................................................................................
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below . Should any component or part fail during this guarantee period it will be repaired or replaced free of charge.
デバイスRoberts Gemini 59 RD-59の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Roberts Gemini 59 RD-59をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRoberts Gemini 59 RD-59の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Roberts Gemini 59 RD-59の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Roberts Gemini 59 RD-59で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Roberts Gemini 59 RD-59を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRoberts Gemini 59 RD-59の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Roberts Gemini 59 RD-59に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRoberts Gemini 59 RD-59デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。