RobertsメーカーR9974の使用説明書/サービス説明書
ページ先へ移動 of 20
3 Band PLL Synthesised Portable Mains Battery Radio Please read this manual before use ROBER TS Sound for Generations R9974.
2 Controls ........................................................................... 3-4 Display .................................................................................5 Battery operation ...................................................
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 3 Controls (T op) 13 6 8 7 10 5 4 9 1. On/Of f button 2. LCD display 3. Band/Step button 4. Radio alarm button 5. Buzzer alarm button 6. Scan/Time set button 7.
4 Controls 1 1. Headphone socket 12. DC input socket 12 11.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 5 a cd f e g h i j a. W aveband indicators b. Frequency indicators c. Sleep/Snooze indicators d. PM indicator e. Time set indicator f. T ime indicators g.
6 Battery operation 1. Release the catch securing the rear door of your radio. 2. Insert four LR20 (D size) batteries into the spaces in the compartment. T ake care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 7 Setting the clock 1. The clock will start running when the batteries are installed or when the radio is connected to the mains supply . The display will show " -:--" together with the real time symbol .
8 Operating your radio Y our radio is equipped with four tuning methods:- Scan tuning, Manual tuning, Search tuning and Memory preset tuning. Scan tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band button.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 9 Manual tuning 1. Press the Power button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the T elescopic aerial and set it at an angle of 45 degrees.
10 Search tuning 1. Press the Power button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the T elescopic aerial and set it at an angle of 45 degrees. 3. Press and hold down either the Tuning up or Tuning down buttons for more than 0.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 11 Storing stations in preset memories There are 5 memory presets for each waveband. 1. Press the Power button to turn on the radio. 2. T une to the required station using one of the methods previously described.
12 Recalling preset stations 1. Press the Power button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band but- ton. 3. Momentarily press the required Preset button , the preset number and station frequency will appear in the display .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 13 Setting the radio alarm When the radio alarm is selected the radio will turn on and play the station selected during the alarm set up. The radio alarm will sound for one hour unless turned off by pressing the Power button .
14 Setting the HWS (Humane W ake System) buzzer alarm A beep tone will sound when using the HWS alarm. The alarm beep will increase in volume every 15 seconds for one minute followed by one minutes silence before repeating the cycle. The HWS alarm will sound for one hour unless turned off by pressing the On/Off button .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 15 Snooze function 1 . Whilst the alarm is sounding pressing any button (except the Power button ) will activate the snooze function. The Radio or Buzzer alarms will be silenced for 5 minutes.
16 T uning step size In Europe and other parts of the world MW tuning steps are 9kHz, in America the MW tuning step size is 10kHz. On FM tuning steps can be set to either 50 or 100kHz. 1. Ensure that your radio is switched off. 2. Press and hold down the Step/Band button for 2 sec.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 17 Display backlight 1. The display backlight will be switched on for approximately 15 seconds when any button is pressed, during station scanning and when the alarm is operating.
18 Circuit Features Loudspeaker 75mm 4ohm full range Output Power 800mW Headphone socket 3.5mm dia Aerial System FM T elescopic aerial MW/L W Ferrite Rod Specifi cations Power Requirements Mains (via AC adaptor) AC 230 volts, 50Hz only/DC 6V 400mA Batteries 4 x LR20 (D size) Battery Life Approx.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 19 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty w orkmanship or component breakdown, subject to the procedure stated below .
ROBERTS RADIO TECHNICAL SER VICES 97-99 Worton Road Isleworth Middlesex TW7 6EG T echnical Helpline :- 020 8758 0338 (Mon-Fri during offi ce hours) Website: http://www .
デバイスRoberts R9974の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Roberts R9974をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRoberts R9974の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Roberts R9974の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Roberts R9974で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Roberts R9974を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRoberts R9974の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Roberts R9974に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRoberts R9974デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。