RobertsメーカーSC9908の使用説明書/サービス説明書
ページ先へ移動 of 20
SC9908 3 Band Stereo Radio Cassette Recorder Please read this manual before use ROBER TS Sound for Generations P owe r Time D i spl ay Al ar m o f f M o de Se t 54 0 15 0 60 0 18 0 16 0 2 00 80 0 22 0.
Controls 1. Headphone socket 2 . Volume control 3. Telescopic aerial 4 . Deep bass boost switch 5. Microphone 11 . Play button 12 . Rewind button 13 . Fast forward button 14 . Stop/eject button 15 . Pause button 1 6 . Operation switch 7 . Function switch 8.
If you need any further advice, please call our Technical Helpline on :- 0181 758 0338 (Mon-Fri) Mai ns Ti m e Di sp la y FM 88 94 96 1 00 1 04 1 06 1 08 MHz 88- 108 MHz Ala rm off M od e Se t 54 0 15.
Battery operation IMPORTANT - The LR6 (AA size battery) must be fitted at all times to provide power for the clock. 1. Remove the Battery cover on the rear of the unit by pushing the catches in the direction of the arrow. 2 . Insert one LR6 (AA size) battery into the small space in the battery compartment.
If you need any further advice, please call our Technical Helpline on :- 0181 758 0338 (Mon-Fri) Listening to the radio FM operation 1 . Ensure that the Operation switch is in the 'Manual' position. 2 . Set the Function switch to the 'Radio' position.
5 Medium and long wave operation 1 . Ensure that the Operation switch is in the 'Manual' position. 2 . Set the Function switch to the 'Radio' position. 3 . Select 'MW' or 'LW' using the Waveband switch . 4 . Adjust the Volume control until a hissing sound is heard.
If you need any further advice, please call our Technical Helpline on :- 0181 758 0338 (Mon-Fri) Listening to cassette tapes 1 . Ensure that the Operation switch is in the 'Manual' position. 2 . Set the Function switch to the 'Tape' position.
7 Recording from the Radio 1 . Ensure that the Operation switch is in the 'Manual' position. 2 . Set the Function switch to the 'Radio' position. 3 . Tune in to the desired station. 4 . Adjust the Volume control to suit your requirements.
If you need any further advice, please call our Technical Helpline on :- 0181 758 0338 (Mon-Fri) Recording from the Internal Microphone 1 . Ensure that the Operation switch is in the 'Manual' position. 2 . Set the Function switch to the 'Tape' position.
Setting the clock 1 . Press the Set button six times, the display will show the hours digit. 2 . Press the Mode button until the required hour is displayed. 3 . Press the Set button , the display will show the minutes digit. 4 . Press the Mode button until the required minute is displayed.
If you need any further advice, please call our Technical Helpline on :- 0181 758 0338 (Mon-Fri) Setting the date 1 . Press the Set button four times, the display will show the months digit. 2 . Press the Mode button until the required month is displayed.
Setting the alarm to wake to radio 1 . Set the alarm as previously described. 2. Tune in to the desired station, and adjust the volume to the required level. 3 . Set the Operation switch to the 'Auto' position. 4 . Press the Set button the hours and minutes digits will flash.
If you need any further advice, please call our Technical Helpline on :- 0181 758 0338 (Mon-Fri) Activating the hourly alarm 1 . Press the Set button , the hours and minutes digits will flash. 2 . Repeatedly press the Mode button until the symbol is showing.
Displaying the alarm time 1 . Whilst the current time is displayed press the mode button once. The alarm time stored will be displayed; after approximately two seconds the display will automatically switch back to current time. Displaying the date 1 .
If you need any further advice, please call our Technical Helpline on :- 0181 758 0338 (Mon-Fri) Headphones socket A 3.5mm Headphone Socket located on the top of you radio cassette is provided for use with either headphones or an earpiece. Inserting a plug into the socket automatically mutes the internal loudspeaker.
15 Cleaning the Heads The binder and oxide from magnetic tapes can accumulate on the pinch roller (A) the capstan shaft (B) and also the heads (C and D). This will impair the sound quality. To clean these parts proceed as follows:- 1. Turn off the power to the unit.
16 The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED.
The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains: AC 230 volts, 50Hz only Batteries: Radio/Cassette 4 x LR14 (C size) Clock Battery 1 x LR6 (AA size) Frequency Coverage F M 87.
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 0181 758 0338 (Mon-Fri) Issue 1 SC9908 Instruction Book.
デバイスRoberts SC9908の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Roberts SC9908をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRoberts SC9908の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Roberts SC9908の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Roberts SC9908で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Roberts SC9908を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRoberts SC9908の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Roberts SC9908に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRoberts SC9908デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。