Sakarメーカー14097の使用説明書/サービス説明書
ページ先へ移動 of 28
- 1 - 14097 Digital Camera Owner’s Manual © 2006 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation.
- 2 - Table of Contents What your camera includes: .................................................................................................. 3 Computer System Requirements ......................................................................
- 3 - Introduction Thank you for purchasing your digital camera. This uni t can be used as a webcam it can also be used as a low-resolution digital camera. This camera is equipped with a 16MB built-in RAM, therefore y ou are able to use it to take up to 152 low-resolution photos under QCIF mode and high compression.
- 4 - Computer System Requirements To be able to download photos to your PC y ou w ill need the following minimum configuration: Pentium processor or above with MS Windows 98 SE, 2000, ME, XP .
- 5 - Preparing Your Camera for Use Battery Installation Your camera requires two AAA batteries. Insert the batteries into the camera: 1. Slide the cover of the battery compartment open. 2. Insert batteries according to the polari ties (+ and -) indicated inside the battery compartment.
- 6 - Starting Your Camera Press the mode button to start the camera. The camera w ill sound a beep to confirm that your camera is on and ready for use. The LCD display will show the number of photos you can take before needing to download them to your PC.
- 7 - The Camera Modes Photo Resolution and Compression There are 2 photo resolutions to select from, HI or Lo. 1. Press the mode button to select "HI” or "Lo” show n on the LCD display.
- 8 - 4. All photos taken after changing compression will be at the new compression. The photo compression and resolution settings determine the number of photos and the amount of memory required for each photo.
- 9 - 1. Press the mode button to select the icon shown on the LCD screen. 2. Press the shutter button to start a 10 second count down (the LCD will flash once a second). After 10 seconds a photo is taken. Delete (Last Photo) To delete the last photo taken: 1.
- 10 - 3. Press the shutter button again within 5 seconds. All photos in the camera will be deleted and the LCD counter will be reset to show the number of photos y ou can take at the current resolution and compression.
- 11 - Energy save mode: In order to conserve battery power, if the came ra is not used within 30 seconds, the camera will automatically switch off. Video Mode: To take video clips (AVI format): 1. Press the mode button to select shown on the LCD screen.
- 12 - Installing Limited Too P hoto Manager Software Before attempting to install the software, make sure that you do not have the camera or the USB cable attached to your computer. This may cause y our installation to fail. Do not connect the cable to the computer until the entire installation proc ess has been completed.
- 13 - 2. Insert the CD into your CD-Rom drive. Make sure that y our camera is not connected to the computer. 3. On the “Install your camera software” screen, select y our camera model from the drop do w n list and click the “Install” button to install the “Photo Manager” followed by the installation of WebCam Express.
- 14 - 1. On the “Photo Manager" screen, click the “ Next” button. 2. Please review the license terms and click the “Agree” button to continue.
- 15 - 3. Let the “Photo Manager” installer create the folde r where the program will be installed to, and then click “ Install ”. 4. Click “ Finish ” to let the “Photo Manager” installer finish the installation program.
- 16 - 5. This will automatically launch the Insta ll shield for the camera driver. Click “ Next ” to continue. 6. Once the program has finished installi ng you will have to restart your computer. 7. Congratulations ! ! You have successfully installed the “Limited Too Photo Manager” software, the “WebCam Express” and the Camera driver.
- 17 - Downloading Photos Use the “Limited Too Photo Manager” program to i mport photos and video clips (AVI files) from your camera. 1. Plug one end of th e USB cable into the USB slot on y our camera. 2. Plug the other end of the USB cable into a USB port on y our computer.
- 18 - 6. The “Get photos” wizard will appear with the correct name of your camera device selected in the “Active devices” list in the “Express” mode. Click the “ Next ” butt on to proceed. 7. On the next screen, choose where you want to pla ce y our photos and video clips.
- 19 - 8. Select one of two options for the size of your pictures. High resolution (pixel up selected) or low resolution. 9. All of the pictures you imported will then appear in the “ Select photos ” mod e’s main w indow.
- 20 - Everything you need to get the most of y our photos and MORE Download photos instantl y from your digital camera, medi a cards, CDs and storage devices to your computer. Manage your photos by creating countless unique photo collections without duplicating any photos.
- 21 - Now that you have your camera i nstalled y ou can use it to capture short movies called AVI files. The length of time you can record an AVI while the camera is connected to your computer will vary, depending on how much hard drive space you will use to save the file.
- 22 - 3. Click the “ Capture ” button to start recording the video. The recording elapse time will appear under the video. 4. Click the “ Pause ” button to hold the recording. To continue recording click the “ Capture ” button again. 5. To finish recording click the “ Stop ” button.
- 23 - 2. To learn how to c hange the user settings, go to the “S et User Preferences” section in the Quick Start help. Video Conferencing with the WebCam You can use this camera as a webcam to ch.
- 24 - Sakar One Year Warranty This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship.
- 25 - Appendix A: Technical Specifications Image Sensor CMOS Sensor 100K (352x 288) p ixels Resolution 352x 288 (CIF) Memory 1M x 16 bytes SDRAM Number of Pictures Ld: Hi 18CIF/Lo 64 QCIF Hd: Hi 50 CIF Lo 152 QCIF Lens f=3.
- 26 - Appendix B: Troubleshooting Q: I have taken photos, but my computer says "No photos in camera ." What do I do? • First, ensure that you have taken photos with your ca mera. Press the shutter button a few times to take some sample photos and try again.
- 27 - 2. Now reinstall the software. Insert the CD that came with your camera. It should automatically run the installation. 3. Restart the computer. 4. Once your computer is back up, plug t he camera into your computer's USB p ort. 5. Right-click on the "My Computer" icon.
- 28 - If you are running Windows 2000 or XP: Right click on the non fu nctioning device and select uninstall. I f a warning pops up, press OK. 6. Restart your computer again.
デバイスSakar 14097の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sakar 14097をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSakar 14097の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sakar 14097の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sakar 14097で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sakar 14097を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSakar 14097の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sakar 14097に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSakar 14097デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。