Sakarメーカー92045の使用説明書/サービス説明書
ページ先へ移動 of 27
- 1 - 92045 Digital Camera Owner’s Manual © 2007 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation.
- 2 - Table of Contents What your camera includes: ..................................................................................... 3 Computer System Requiremen ts ............................................................................. 3 A Quick Look at Y our Came ra .
- 3 - What your camera includes: Digital Camera Spider-Man Photo Lab software and driver installation CD USB cable User’s Manual Strap Computer System Requirements To be able to .
- 4 - A Quick Look at Your Camera.
- 5 - Preparing Your Camera for Use Face Plate Disassembly You can use the opener to disassemble the face plate from the camera..
- 6 - Battery Installation Your camera requires three AAA alkaline ba tteries, which must be inserted as follows: 1. Open the battery compartment on the back of the camera. 2. Insert the batteries in accordance with the polarity (+/-) shown in the battery compartment.
- 7 - • Opening the battery compartment and/or removing the battery will erase the photos currently stored in the camera. • Download your photos as often as possibl e. Photos ma y be lost when the batteries run low. Starting Your Camera Press the POWER / MENU button to start the camera.
- 8 - The Camera Modes Preview Mode This is the default mode for this camera, from which you can compose and take your photos. This mode also enables you to delete the last one or all of your photos, or to change the camera’s resolution selection. Delete All Photos Press the Menu button once to enter the Delete All Photos option.
- 9 - Press the Shutter button once within 5 seconds to c hoose this option and delete the last photo taken with your camera. The last photo will be deleted, and the camera will automatically revert to Preview mode. Resolution Selection Press the Menu button three times to enter the Re solution Selection menu.
- 10 - -- QVGA photo (You can tak e 93 photos with the camera memory) Playback Mode This mode enables you to look through the photos stored on your c amera using the screen.
- 11 - To conserve battery pow er, if the camera is not us ed for 30 seconds, it will automatically switch off. Installing Spider-Man Photo Lab Software Before attempting to install the software, make sure that you do not have the camera or the USB cable attached to your computer.
- 12 - 3. On the “Spider-Man Photo Lab" screen, click the “ Next” button. 4. Please review the license terms and click the “Agree” button to continue.
- 13 - 5. Let the “Spider-Man Photo Lab” installer create th e folder where the program will be installed to, and then click “ Install ”. 6. Click “ Finish ” to let the “Spider-Man Photo Lab” installer finish the installation program.
- 14 - 7. This will automatically launch the Insta ll shield for the camera driver. Click “ Next ” to continue. 8. Once the camera driver has finished installing you will have to restart your computer.
- 15 - 9. Congratulations!! You have successfully installed the “Spider-Man Photo Lab” software and the Cam era driver. Downloading Photos Use the “Spider-Man Photo Lab” program to import photos from your camera. 1. Plug one end of th e USB cable into the US B slot on your camera.
- 16 - Select the “Y es, this time only” option and then click “Next”. From the next screen tha t appears, select the “In stall the software automatically (Recommended)” option and then click “Next”. Wait while the Wizard in stalls the Software.
- 17 - From the next screen tha t appears click the “Continue Any way” button, to continue installing the hardware drivers. Click the “Finish” button. The hardware drivers have now been installed. 5. Be sure to wait un til the camera is recognized by your computer.
- 18 - Important: For WinXP users - Do not open the s oftware until you see the “Your ne w hardware is installed and ready to use” pop-up box on the toolbar. If you do not see this message before you plug in your camera, the camera w ill not function properly.
- 19 - 8. The “Get photos from cam era” window will appear. 9. The photos will be placed by default in the C:My DocumentsMy Pictures folder. To select another location click the “Browse” button and then select a folder you wish to place your photos.
- 20 - The photos on your camera will be downloaded and copied to the fo lder you selected on your computer. 12. Click the “ Select Photos ” button on the Main Menu screen. The fold er that you selected will be opened with the photos appearing in the View thumbnails screen.
- 21 - Spider-Man Book creator - write and print your own sticker books. The sticker book offers a variety of 10 templates/ themes to select for your book. You can also print 10 different “Fun stickers” with a variety of themes. Slide Show - select any one of your photo collections and vi ew them as full screen slide shows.
- 22 - 1. To purchase the “Workshop Project” simply click the one you want and you will be referred to an online website where you can purchase them. 2. Once you purchase the “Workshop projects” they will be automat ically activated in the software.
- 23 - Damages or malfunctions not resulting from defects in material or work manship and damages or malfu nctions from other than normal use, including but limited to, r epair by unauth orized parties, ta mpering, modification or accident.
- 24 - PC interface USB 1.1 Operating Systems Windows 2000 or XP Appendix B: Troubleshooting Q: I have taken photos, but my computer says "No photos in camera ." What do I do? • First, ensure that you have taken photos with your ca mera. Press the shutter button a few times to take some sample photos and try again.
- 25 - 3. Restart the computer. 4. Once your computer is back up, plug t he camera into your computer's USB p ort. 5. Right-click on the "My Computer" icon.
- 26 - recommend always downloading your photos to your computer as soon as possible to prevent unintentional data loss. Q: I have a MAC, will your camera work? Unfortunately, the system requirements for our cameras require a Windows operating system.
- 27 - NOTE: This equipment has been tested and found to compl y with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reas ona ble protection against harmful interference in a residential installation.
デバイスSakar 92045の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sakar 92045をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSakar 92045の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sakar 92045の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sakar 92045で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sakar 92045を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSakar 92045の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sakar 92045に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSakar 92045デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。