SamsonメーカーMDR624の使用説明書/サービス説明書
ページ先へ移動 of 24
MDR Series Mixers HF 12K 0 15 10 10 5 5 15 MF 2.5K 15 10 10 5 15 0 5 0 LF 80Hz 0 15 10 10 5 15 5 AUX 01 0 PAN 0 L R 0 LEVEL 01 0 HF 12K 0 15 10 10 5 5 15 MF 2.5K 15 10 10 5 15 0 5 0 LF 80Hz 0 15 10 10 5 15 5 AUX 01 0 HF 12K 0 15 10 10 5 5 15 MF 2.5K 15 10 10 5 15 0 5 0 LF 80Hz 0 15 10 10 5 15 5 AUX 01 0 HF 12K 0 15 10 10 5 5 15 MF 2.
Safety Instructions/Consignes de sécurité/Sicherheitsvor kehrungen/Instr ucciones de seguridad ACHTUNG: Um die Gefahr eines Brandes oder Stromschlags zu verringern, soll- ten Sie dieses Gerät weder Regen noch Feuchtigkeit aussetzen.Um die Gefahr eines Stromschlags zu verringern, sollten Sie weder Deckel noch Rückwand des Geräts entfernen.
T able of Contents Introduction 2 MDR624 Features 3 Controls and Functions Front and Rear Panel Layout 4–5 Mono Input Channel Section 6–7 Master Section 8–9 MDR624 Input and Output Connections 1.
2 Congratulations on your purchase of the Samson MDR624 mixer! The MDR624 is a six channel mixer, with two low noise microphone pre-amps. In addition to the two mono Mic/line inputs, there are two channels with left and right inputs to handle stereo signals.
3 MDR624 F eatures The Samson MDR624 six channel mixer, is a comprehensive, all-in-one solution for live sound, recording, fixed installation and post production applications. Here are some of its main features: • Six channels – Two Mic/Line plus two Stereo inputs.
4 HF 12K 0 15 10 10 5 5 15 MF 2.5K 15 10 10 5 15 0 5 0 LF 80Hz 0 15 10 10 5 15 5 AUX 01 0 PAN 0 L R 0 LEVEL 01 0 HF 12K 0 15 10 10 5 5 15 MF 2.5K 15 10 10 5 15 0 5 0 LF 80Hz 0 15 10 10 5 15 5 AUX 01 0 HF 12K 0 15 10 10 5 5 15 MF 2.5K 15 10 10 5 15 0 5 0 LF 80Hz 0 15 10 10 5 15 5 AUX 01 0 HF 12K 0 15 10 10 5 5 15 MF 2.
5 F ront and Rear P anel La yout FRONT PANEL 1 MIC – Input connector for Low-Noise Microphone pre- amp. 2 LINE –Input connector for Line level inputs. 3 GAIN – Used to set the input level of the mic pre and line input. 4 HIGH FREQUENCY – Controls the high band of the Channel Equalizer, +/- 15 dB at 12KHz.
6 Controls and Functions The following section details each part of the MDR624’s input channels including the GAIN control, 3-BAND EQ, AUX send, PAN, BALANCE and LEVEL controls.
BALANCE (Stereo Inputs Only) The MDR624’s BALANCE control is used to place or position a mono input into the stereo main Left and Right MIX bus. For a stereo input, the balance control is used to center the sound between the Left and Right Mix bus. You can create a stereo image by panning some input signals to the left and others to the right.
MAIN LEVEL The master MAIN control is the overall volume control for the left and right mix bus. The MAIN LEVEL affects both the Control ROOM signal which is output to the speakers and the line level signal which is output from the MIX OUT jacks.
POWER LED The Power LED lights up to indicate that the main POWER switch (located on the rear panel) is on. - Phantom P ower LED This LED illuminates indicating that the 48 volt phantom power is applied to the microphone pre-amps enabling use with condenser micro- phones.
Microphone Input - Mono Input Channels Use these inputs to connect Low Impedance microphones and low level signals from direct boxes. The MIC inputs have a nominal operating level of –50dB through -20dB. The MIC inputs also feature +48V phantom power, allowing you to use condenser microphones.
AUX Send The signal present at the AUX output is sent from the AUX bus, which is fed from the AUX send on the input channels. The AUX output can be used as the MONITOR MIX bus in a live sound situation by con- necting the output to a power amp and monitor speak- er.
12 Operating the MDR624 BASIC OPERATION The following section explains the basic operation of the MDR624. CONNECTING MICROPHONES AND INSTRUMENTS 1. Before connecting mics or instruments, make sure that the power of all your sys- tems components, including the MDR624, are turned off.
13 Operating the MDR624 USING AN EXTERNAL EFFECT If you want to use an external device for effects processing, you can easily connect the unit using the MDR624 AUX bus. Follow the simple steps below to interface your processor: 1. Set the L/R mix faders to the "2 o’clock" position.
14 MDR624 Sy stem Set-Ups This system shows the MDR624 connected to a pair of powered speakers like the SAMSON Expedition XP200. The MONITOR OUT is c on- nected to an external power amp , which is dri- ving 2 monitor speakers .
15 MDR624 Sy stem Set-Ups This system shows the MDR624 in a recording set up with the LEFT and RIGHT C ONTROL R OOM outputs hooked up to powered studio monitors and the A UX SEND feeding a head- phone mix sent to a Samson S•phone headphone amp.
MDR624 Wiring Guide Unbalanced 1/4” Connector XLR Balanced Wiring Guide The are several ways to interface the MDR624 to support a variety of applications. The MDR624 features bal- anced inputs and outputs, so connecting balanced and unbalanced signals is possible.
MDR624 Specifications Mono input channels Microphone input electronically balanced, discrete input configuration Frequency response 10Hz to 45kHz, +0/- 3dB Distortion (THD&N) 0.
18 Block Diagram.
Notes 19.
Notes 20.
.
Samson T echnologies Corp. 575 Underhill Blvd. P .O. Box 9031 Syosset, NY 1 1791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www .samsontech.
デバイスSamson MDR624の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samson MDR624をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamson MDR624の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samson MDR624の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samson MDR624で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samson MDR624を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamson MDR624の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samson MDR624に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamson MDR624デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。