SamsungメーカーCS29K10MQの使用説明書/サービス説明書
ページ先へ移動 of 40
ENG COLOUR TELEVISION Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS TELETEXT FUNCTION KS3a_Eng_Wide.
2 Safety Instructions The following illustrations represent the precautions to be taken when using and moving your television. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Caution Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%).
3 Contents u u PREPARING YOUR TELEVISION n Safety Instructions .............................................................................................................. 2 n Caution .................................................................
4 Front Panel Controls TV/VIDEO SELECTION MENU DISPLAY VOLUME ADJUSTMENT CHANNEL SELECTION POWER STAND-BY/TIMER INDICATOR REMOTE CONTROL SENSOR â These figures show typical panels. The actual configuration on your TV may be different, depending on your model.
5 Connection Panels HEADPHONE JACK Side of TV Rear of TV RCA AUDIO/VIDEO INPUT CONNECTORS SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTORS 75 Ω Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK â These figures show typical connector-jack panels. The actual configuration on your TV may be different, depending on your model.
6 Infrared Remote Control â â Operation of remote control may be affected by bright artificial light near to the TV set. POWER PICTURE MENU DISPLAY AUTOMATIC SWITCH-OFF/ TELETEXT STORE STILL PICTURE.
7 You must insert or replace the batteries in the remote control when you : u Purchase the television. u Find that the remote control is no longer operating correctly. 1 Remove the cover of the remote control by pressing the symbol ( ) and pulling the cover in the direction of the arrow.
8 The mains lead is attached to the rear of the television. * If you have purchased this television in the United Kingdom, refer to rear cover for further instructions on plug wiring. 1 Plug the mains lead into an appropriate socket. â Use a wall socket with a voltage of between 220 and 240 Volts.
9 Plug & Play Feature When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. 1 If the television is in Standby mode (red light visible on the television front panel), press the POWER button on the remote control.
10 Viewing the Demonstration To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. 1 Press the MENU button. 2 Press the s or t button to select the “Function” and press the + or – button. 3 Press the s or t button to select the “Demonstration” and press the + or – button.
11 You can scan the frequency ranges available on your television and in your country and store all the channels found automatically. The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels.
12 When storing channels manually, you can choose: u Whether or not to store each of the channels found. u The number by which you wish to identify each stored channel. 1 Press the MENU button. 2 Press the s or t button to select the “Channel” and press the + or – button.
13 6 If you... Press the... Know the number us or t button to select the “Channel”. of the channel u + or – button to indicate the required to be stored number. Do not know the us or t button to select the “Search”. channel numbers u + or – button to start the search.
14 If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required. 1 Press the MENU button. 2 Press the s or t button to select the “Channel” and press the + or – button.
15 You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
16 If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. 1 Press the MENU button.
17 You can exchange the numbers of two channels, in order to: u Modify the numeric order in which the channels have been automatically stored. u Give easily remembered numbers to the channels that you watch most often. 1 Press the MENU button. 2 Press the s or t button to select the “Channel” and press the + or – button.
18 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available in the order given: u u Custom, Standard, Sports, Natural, Mild. 1 Press the MENU button.
19 Adjusting the Picture Settings Your television has several settings which allow you to control picture quality: u Colour tone, Contrast, Brightness, Sharpness, Colour, Tint (NTSC only) 1 Press the MENU button. Result: The “Picture” menu is displayed.
20 Using the Tilt Control Feature (Option) If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting. 1 Press the MENU button. Result: The “Picture” menu is displayed. 2 Press the + or – button. 3 Press the s or t button to select the “Tilt”.
21 Changing the Sound Standard You can select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available in the order given: u u Custom, Standard, Music, Movie, Speech. 1 Press the MENU button.
22 Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU button. 2 Press the s or t button to select the “Sound” and press the + or – button. 3 Press the s or t button to select the “Equalizer”.
23 Extra Sound Settings (depending on the model) The following sound settings can be adjusted to suit your personal preferences. u u Auto volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
24 The “ I-II ” button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is automatically preset to either “Dual- I ” or “STEREO”, depending on the current transmission.
25 Switching the Sound Off Temporarily You can switch the sound off temporarily, for example you may wish to answer the telephone. 1 Press the “ ” button.
26 You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode by pressing the " " button. 1 Press the “ ” button on the remote control. Result: If the sleep timer is... The screen displays.
27 You can set the television’s clock so that the current time is displayed when you press the " " button. You must also set the time if you wish to use the automatic On/Off timers. â The clock setting will be re-activated when pressing the “ ” (ON/OFF) button on the front panel.
28 You can set the On/Off timers so that the television will: u u Switch on automatically and tune to the channel of your choice at the time you select u u Switch off automatically at the time you select â â The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on the previous page).
29 If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue screen” mode to “Off”. 1 Press the MENU button.
30 Most television channels carry “teletext,” pages of written information that provide information such as: u u Television programme times u u News bulletins u u Weather forecasts u u Sports results u u Subtitles for the hard of hearing The teletext pages are organized according to six categories: Part Contents A Selected page number.
31 You can display teletext information at any time, but signal reception must be good. Otherwise: u u Information may be missing u u Some pages may not be displayed To activate the teletext mode and display the contents page: 1 Using the s ( ) or t ( ) button, select the channel providing the teletext service.
32 Press the number buttons on the remote control to enter the page number directly: 1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
33 Up to four teletext pages can be stored. 1 Select the LIST mode. Result: Four 3-digit numbers are displayed in different colors at the bottom of the screen. 2 Press the colored button corresponding to the page that will be replaced. 3 Enter the new page number using the numeric buttons.
34 Connecting to the AV-1 or 2 SCART Input/Outputs â AV-1 is used for equipment with an RGB output, such as video game devices and video disc players or a VCR.
35 Connecting to the RCA Input (AV2) â The RCA (video + audio L and R) connectors are used for equipment such as camcorders, video disc players and some video game devices.
36 You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room. 1 Plug a set of headphones into the 3.5 mm mini-jack socket on the side or front of the television (depending on the model).
37 A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually. If you move the television to a different position and color patches appear on .
38 Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. u Check that the mains lead has been connected to a wall socket.
39 Memo ENG KS3a_Eng_Wide.qxd 10/19/2002 1:03 PM Page 39.
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
デバイスSamsung CS29K10MQの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung CS29K10MQをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung CS29K10MQの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung CS29K10MQの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung CS29K10MQで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung CS29K10MQを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung CS29K10MQの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung CS29K10MQに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung CS29K10MQデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
