SamsungメーカーDCS 50siの使用説明書/サービス説明書
ページ先へ移動 of 26
• LCD 24B • LCD 12B • STD 24B • B ASIC 12B •7 B KEYSET USER GUIDE F ebr uar y 2000 SAMSUNG DCS 50si DIGIT AL COMMUNICA TIONS SYSTEM.
T ABLE OF CONTENTS ABOUT THIS BOOK ........................................................... 1 THINGS Y OU SHOULD KNO W ................................ 2–9 OUTSIDE CALLS Making an Outside Call .....................................................
CUST OMIZING Y OUR KEYSET AME BGM ........................................................................................ 32 AME P ass word ................................................................................ 32 Select Ring T one ........
THINGS Y OU SHOULD KNO W USER ORIENT A TION DCS 50si telephones are called “ke ysets. ” The y contain buttons or “k eys” that are used to access or activate the many features of your office phone system. The ke ys with paper designation str ips are programmable k e ys.
4 5 LCD 24B KEYSET LA Y OUT LABELING PROGRAMMABLE KEYS Inser t the end of a paper clip into the notch of the clear cov er . Push the cover sideways. Lift the cover and remove the desig- nation strip . Label the designation str ip . Replace the str ip and cov e r .
6 LCD 12B KEYSET LA Y OUT LABELING PROGRAMMABLE KEYS Inser t the end of a paper clip into the notch of the clear cov er . Push the cover sideways. Lift the cover and remove the desig- nation strip . Label the designation str ip . Replace the str ip and cov e r .
8 B ASIC 12B KEYSET LA Y OUT LABELING PROGRAMMABLE KEYS Inser t the end of a paper clip into the notch of the clear cov er . Push the cover sideways. Lift the cover and remove the desig- nation strip . Label the designation str ip . Replace the str ip and cov e r .
OUTSIDE CALLS MAKING AN OUTSIDE CALL • Lift the handset and press an idle outside line button, line group button or dial a line access code to receive dial tone —OR— to use the speakerphone, pre.
INTERCOM CALLS CALLING O THER ST A TIONS • Dial the e xtension number or g roup number . • W ait f or the par ty to ans wer . If you hear a brief tone burst instead of ringbac k tone, the station y ou called is set f or V oice Announce or Auto Ans wer .
CALL PR OCESSING SYSTEM HOLD • When you are connected to an y call, press HOLD . The call will flash green at your keyset. If this call appears on a line key at other keysets, it will flash red at those keysets. • T o tak e the caller off hold, press that ke y and the green flashing light will go steady green again.
16 When you are tr ansf err ing a call to a ke yset set f or V oice Announce or A uto Ans wer , the transferred call will alw ays ring. NO TES: 1. After the inside par ty ans wers , you ma y alter nate back and f or th between the par ties by pressing the TRSF key .
2. The station that receives a Forwarded All call can transfer the call to the f orwarded station. This is useful when you are e xpecting an impor tant call but you do not wish to be disturbed by other calls.
• Dial the destination number (e.g., 202 ) OR Press UP or DO WN to select the destination Press the right soft key to move the cursor • Dial 1 to set OR Press UP or DO WN to select YES or NO • P.
22 • The A key is not used. • The B ke y inser ts a flash. • The C ke y inser ts a pause. • The D key is used for pulse to tone conversion. If your system uses rotary (or pulse) dialing C .O . lines, pressing D while enter ing a speed dial number causes all subsequent digits to be sent as DTMF tones.
P A GING AND MESSA GING MAKING AN INTERNAL P A GE T o make an announcement through the k eyset speak ers: • Lift the handset. • Press the PA G E ke y or dial 55 . • Dial the desired zone number 1 , 2 , 3 or 4 . OR Dial 0 to page all internal zones.
CANCELING MESSA GES T o cancel a message indication that y ou left at another station, dial 42 plus the extension number of the station at which you left a message. T o cancel all message indications left at y our ke yset, dial 42 plus your e xten- sion.
APPOINTMENT REMINDER/ALARM CLOCK This feature works like an alarm clock. Use it to remind yourself of an appoint- ment later in the da y (T OD A Y ONL Y) or as a daily reminder ev er y da y (D AIL Y). Y ou can set up to three alarms. Each one can be either a T OD A Y ONL Y or a D AIL Y alarm.
• Enter the account code (maximum 12 characters including ✱ and # ). Press the A CCT ke y again. Y our con versation will not be interrupted. NO TE : If you make an error before you complete the account code, press the A CCT k ey twice and redial the correct code .
CUST OMIZING Y OUR KEYSET AME BGM This feature selects whether a station using Answer Machine Emulation will hear their personal greeting or BGM while callers are listening to the personal greeting.
HO T KEYP AD On the DCS, y our k eyset’ s ke ypad can be made “liv e” or “hot” so that it is not necessar y to lift the handset or press SPK or the MONIT OR ke y bef ore you begin dialing. Calls can be made and features activated by simply dialing the C .
DIAL BY DIRECT OR Y Each station or speed dial number can have an associated directory name. A station or speed dial number can be selected by scrolling alphabetically through a director y name list. This on-line “phone book” allows the user to look up and dial any station or speed dial number in seconds.
COUNT 1234 5 DIAL 0 Q Z . ) 0 DIAL 1 space ? , ! 1 DIAL 2 A B C @ 2 DIAL 3 D E F # 3 DIAL 4 G H I $ 4 DIAL 5 J K L % 5 DIAL 6 M N O ^ 6 DIAL 7 P R S & 7 DIAL 8 T U V ✱ 8 DIAL 9 W X Y ( 9 DIAL .
The DCS 50si system can handle both types of Caller ID; in fact, in the case of number only deliv er y , the system can be programmed to inser t a name for a specific telephone number (up to a maximum of 250 numbers).
• Press the CID k ey and then press the SCROLL key . • Press the ST ORE soft ke y . • The system displays the speed dial bin in which the number was stored. NO TE: Y our telephone system m ust hav e LCR correctly progr ammed to redial the sav ed number .
44 ADD-ON MODULE WITH KEYSET The add-on module (AOM) is used when you need more programmable keys or e x ecutive off-hook v oice announce (OHV A). The e xtra programmab le ke ys are used e xactly as are the ones on your k e yset. Mak e them DSS/BLF k ey s , C.
46 PERSONAL SPEED DIAL NUMBERS CODE NAME TELEPHONE NUMBER 2 5 _________________________ _________________________ 2 6 _________________________ _________________________ 2 7 _________________________ .
デバイスSamsung DCS 50siの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung DCS 50siをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung DCS 50siの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung DCS 50siの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung DCS 50siで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung DCS 50siを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung DCS 50siの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung DCS 50siに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung DCS 50siデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
